Ship Third Engineer Exam Questions Around the World: A Comprehensive Guide to Written, Oral and Practical Assessments

A study guide for marine engineering cadets, junior engineers, lecturers and candidates preparing for an engineering watchkeeping certificate

Information checked: 2 November 2026

A ship’s third engineer needs more than the ability to describe a diesel engine. The officer must understand machinery, recognise abnormal conditions, communicate with the bridge and senior engineers, prevent pollution, follow safe working procedures and respond to emergencies. National examinations try to assess these abilities in different ways.

A candidate in India may prepare for a Marine Engineer Officer Class IV examination. A candidate in the United Kingdom may be working towards an Engineer Officer of the Watch certificate. In the United States, a corresponding national credential may be called Third Assistant Engineer. In Italy, the operational certificate is generally called Ufficiale di macchina. The titles differ, and they should not be treated as automatically interchangeable.

This guide explains the international foundation of engineering certification, compares eleven national systems and provides a large bank of original practice questions with model answers. It includes written questions, oral questions, multiple-choice exercises, engineering calculations and emergency scenarios.

Important study note: The practice questions in this article were written for education. They are not claimed to be actual past papers, leaked questions, a complete official syllabus or a guarantee of what any examiner will ask. Country-labelled examples show how to practise relevant competencies; they are not evidence that the same questions have appeared in that country. For actual eligibility, exam formats, fees, syllabuses and dates, consult the current national administration and your approved training provider. Use your ship’s safety management system, manufacturer’s instructions and the chief engineer’s directions for actual operations.

Contents

  1. Third engineer rank and professional certification
  2. The STCW international framework
  3. Written, oral and practical examinations
  4. Comparing examination routes in eleven countries
  5. How to answer written and oral questions
  6. Written examination practice questions
  7. Worked marine engineering calculations
  8. Oral examination questions and model answers
  9. Scenario-based oral examination practice
  10. Multiple-choice practice examination and answers
  11. An eight-week study plan
  12. Final preparation checklist
  13. Glossary for maritime students
  14. Official references and further reading

1. What is a third engineer?

The third engineer is generally a junior engineer officer in the engine department. The exact place in the hierarchy varies by company, ship type and country. In some fleets, a fourth engineer is the most junior licensed engineer, while in others a third engineer is the first watchkeeping engineer after completing cadet training.

The third engineer’s assigned duties can include:

  • Keeping an engineering watch or serving as a designated duty engineer.
  • Monitoring propulsion and auxiliary machinery.
  • Operating generators, pumps, purifiers, boilers and compressors within the officer’s competence and the ship’s procedures.
  • Carrying out maintenance and keeping records.
  • Investigating machinery alarms and reporting abnormal conditions.
  • Assisting with bunkering and fuel or lubricating-oil transfers.
  • Supporting pollution prevention, fire safety, enclosed-space safety and emergency drills.

The officer’s actual responsibilities are set by the chief engineer, company procedures, manning arrangements, the ship’s flag State and the individual’s certificate and endorsements. An officer must not assume that the title printed on an employment contract grants permission to carry out every task independently.

Rank is not the same as a certificate

Term Meaning
Third engineer A shipboard rank or job title.
Engineer Officer of the Watch (EOOW) A commonly used description of an operational-level engineering watchkeeping qualification.
Officer in Charge of an Engineering Watch (OICEW or OIC-EW) The STCW watchkeeping function used by many administrations.
Certificate of Competency (CoC) An official certificate showing that the holder has met a State’s requirements for specified functions and limitations.
Endorsement An official statement that may identify functions, limitations or recognition of another State’s certificate. Its exact legal meaning depends on the issuing administration.
Third Assistant Engineer A United States national engineering credential title; applicable national and STCW endorsements must be checked separately.

A certificate from one State is not automatically valid on every foreign-flag ship. Recognition under STCW Regulation I/10, national rules, any necessary flag-State endorsement and the ship’s minimum safe manning requirements must be considered.

2. What does STCW require?

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers, known as the STCW Convention, provides an international framework for seafarer training and certification. Chapter III covers the engine department.

For an officer in charge of an engineering watch on a seagoing ship powered by main propulsion machinery of 750 kW or more, the central operational-level requirements are found in STCW Regulation III/1 and Section A-III/1 of the STCW Code, particularly Table A-III/1. The regulation also covers the designated duty engineer in a periodically unmanned machinery space. The Convention applies subject to its scope, exceptions and national implementation. See the IMO’s STCW overview and the EU text reproducing Regulation III/1.

STCW describes competence using tasks, knowledge and criteria for evaluating performance. It does not create a single worldwide examination paper or require every State to use one identical examination format. Administrations approve training, assess competence and issue certificates through their national systems.

Four principal areas of operational competence

Area Typical knowledge and skills assessed
Marine engineering Watchkeeping; main and auxiliary machinery; pumping, fuel, lubrication, cooling, compressed air and steam systems; machinery operation and emergency action.
Electrical, electronic and control engineering Electrical safety; generators and distribution; monitoring and control; basic fault identification; operation and maintenance within the officer’s competence.
Maintenance and repair Tools and measuring equipment; safe isolation; dismantling, inspection, repair, reassembly and testing; maintenance records.
Controlling ship operations and caring for persons on board Pollution prevention, basic stability and construction, fire protection, life-saving appliances, first aid, communication and safe working practices.

For practical preparation, remember that an examiner can combine several areas. A question about a purifier overflow, for example, can involve machinery, fire risk, pollution prevention, reporting and maintenance.

Sea service and other requirements

Passing a written or oral exam is only one part of certification. Depending on the route and administration, a candidate may also need approved education, workshop skills, a training record book, supervised sea service, specified safety courses, medical fitness and a practical demonstration of competence. Eligibility periods and acceptable routes differ: always check the latest national requirements rather than relying on a general number of months quoted on an internet forum.

Additional training and endorsements can be required for particular duties, ships or fuels. Examples include certain tanker duties, ships subject to the IGF Code and high-voltage tasks. Possession of a general III/1 certificate does not by itself prove that every additional ship-specific requirement has been met.


3. Written, oral and practical examinations: what is the difference?

Assessment What a candidate may be asked to do What examiners are looking for
Written or digital Answer multiple-choice questions, write explanations, complete calculations, read diagrams or explain a sequence. Technical knowledge, understanding, correct calculations and the ability to organise an answer.
Oral Explain a system, answer follow-up questions or describe action during a fault or emergency. Safe judgement, practical understanding, communication and the ability to prioritise.
Practical or simulator Demonstrate safe isolation, identify components, operate equipment or respond to an engineered scenario. Competent performance, awareness of hazards, teamwork, equipment handling and correct procedures.
Course and onboard assessment Complete approved modules, workshop tasks, a training record book and supervised shipboard work. Evidence that knowledge and skills have been developed and assessed over time.

Not every country uses all four formats in the same way. A national authority may conduct an oral examination while written assessments are administered by an approved college. Elsewhere, theoretical and practical assessments may be the main published framework. Some routes have exemptions or transitional rules.

A typical oral exchange

Examiner: You are on watch and the main-engine lubricating-oil pressure is falling. What will you do?

Candidate: I would confirm the alarm and assess whether the pressure is genuinely low, while treating it as a serious condition. I would follow the ship’s emergency procedures, call the chief engineer and inform the bridge promptly because propulsion may be affected. If the system permits, I would ensure the standby lubricating-oil pump operates, check the supply and filters from a safe position, and monitor temperatures and engine condition. I would not bypass protective devices. If pressure cannot be maintained, I would follow the maker’s instructions and the ship’s procedures for reducing load or stopping the engine, coordinating with the bridge as the situation allows.

The candidate shows more than a list of causes. The answer addresses safety, communication, immediate action, diagnosis and protective limits.


4. Third engineer and watchkeeping examinations in different countries

The following comparison focuses on a qualification relevant to operational engineering watchkeeping. It is not a legal equivalence table: power, propulsion type, voyage restrictions, national endorsements and individual eligibility can differ. An older official publication may still be useful as a study reference but should not be treated as proof of the latest administrative procedure.

Country Relevant qualification or system Published assessment approach Where to begin
Italy Ufficiale di macchina; STCW operational engineering function A theoretical-practical competence examination; consult the applicable current examination programme and local maritime authority for its administration. MIT / Capitaneria di Porto
United Kingdom Engineer Officer of the Watch, unlimited, III/1 MCA oral examination plus relevant engineering knowledge assessments; modernised digital and older written routes depend on the candidate’s pathway and start date. Maritime and Coastguard Agency (MCA)
India MEO Class IV Directorate reporting describes written subjects and oral functions in Parts A and B; exemptions and current arrangements depend on the route. Directorate General of Shipping (DGS)
Philippines Officer in Charge of an Engineering Watch MARINA publishes theoretical-examination and practical-assessment requirements; verify the current process and any required follow-up assessment. MARINA
United States Third Assistant Engineer, national endorsement; relevant STCW OICEW credential separately The US Coast Guard publishes national examination modules and sample exams. Do not assume an identical oral exam is required for every route. US Coast Guard National Maritime Center
Canada Fourth-class Engineer, with applicable STCW endorsement Transport Canada publishes examination procedures, a specimen-question collection and an STCW study guide; its STCW bulletin also identifies an oral maritime-law subject. Transport Canada
Australia Engineer Watchkeeper Approved education and training, required service and a final AMSA oral examination; course assessments form part of the route. Australian Maritime Safety Authority (AMSA)
New Zealand Marine Engineer Class 3 (MEC 3) Approved qualification, training and service plus a final examination; Maritime NZ describes the final examination generally as oral. Maritime New Zealand
South Africa Engineer Officer of the Watch, III/1 SAMSA publishes an operational engineering oral-assessment guideline; other academic and practical requirements depend on the route. South African Maritime Safety Authority (SAMSA)
Singapore Marine Engineer Officer Class 5 is one watchkeeping-oriented route; verify certificate and restrictions. MPA application materials distinguish written and oral examinations. An older Class 5 guideline describes route-dependent written and oral assessment; confirm current rules. Maritime and Port Authority of Singapore (MPA)
Pakistan Marine Engineer Officer Class IV, foreign-going The Mercantile Marine Department lists written and oral examination categories; obtain the current syllabus and eligibility rules directly. Mercantile Marine Department

4.1 Italy: Ufficiale di macchina

Italy’s Decree No. 72 of 7 May 2025 describes the Ufficiale di macchina as an officer below the first engineer who can be responsible for an engineering watch in a manned or periodically unmanned machinery space, within the decree’s conditions. The same decree sets out education, training, sea-service and assessment requirements. The Italian maritime labour portal lists Decree No. 76 of 9 May 2025 among the programmes for STCW certification examinations. The competent maritime authority and current programme should be consulted for the actual form, session and questions; “theoretical-practical examination” should not automatically be read as a universal fixed format of separate written and oral papers.

Original practice examples:

  • Technical: Explain how you would safely prepare, isolate and inspect a seawater pump, and how you would record the work.
  • Oral: During the watch, the emergency generator fails to start during a test. What would you check and whom would you inform?

Answer direction: For the pump, discuss permit, isolation, draining, verification, inspection, reassembly, leak testing and records. For the generator, maintain safety, report the failure and check the approved starting, fuel, control and alarm arrangements without defeating protections.

Sources: Italian certification requirements, Decree 72/2025 and Italian examination programmes.

4.2 United Kingdom: Engineer Officer of the Watch

The UK Maritime and Coastguard Agency uses the title Engineer Officer of the Watch (EOOW), unlimited, STCW III/1. The MCA publishes a detailed engineering oral-examination syllabus and engineering knowledge guidance. Oral questions can start broadly and develop through follow-up questions about the candidate’s judgement and practical experience.

The UK’s modernisation makes the start date and route important. Under the MCA’s September 2026 guidance, new EOOW cadet starters from August 2025 follow the modernised syllabus and relevant operational-level digital assessments: Engineering Knowledge—General, plus Motor, Steam or both, as applicable. Certain candidates on older routes continue under transitional arrangements, and some degree-route exemptions apply. The MCA also publishes written and digital assessment timetables. Candidates should check their own transition and any subsequent amendment.

Original practice examples:

  • Written/digital-style: Explain the function of a diesel-engine starting-air distributor and the hazards of oil in the starting-air system.
  • Oral: Explain your actions when taking over an engineering watch during a purifier alarm.

Answer direction: Describe controlled distribution of starting air and fire/explosion prevention. For the watch, obtain an accurate handover, check the alarm and plant condition, agree who is responsible and do not accept an unsafe or unclear situation without resolving it.

Sources: MCA oral syllabus, EOOW engineering knowledge syllabus and modernised qualification guidance.

4.3 India: MEO Class IV

India’s Directorate General of Shipping uses the Marine Engineer Officer Class IV route for operational-level engineering certification. Its 2024 engineering STCW annual report describes a structure with Part A and Part B. In that report, Part A includes written subjects such as heat engines, applied mechanics, mathematics and engineering drawing. Part B includes subjects associated with ship safety, marine engineering knowledge, electrotechnology and engineering practice, together with oral functions 3, 4B, 5 and 6.

This is a description of the published 2024 structure, not a statement that every subject or exemption remains identical for every candidate today. Check the DGS examination portal, current notices and your approved programme.

Original practice examples:

  • Written: Calculate the fuel consumed in 24 hours when an engine produces 5,000 kW at an SFOC of 180 g/kWh. Answer: 21.6 tonnes, assuming constant output and SFOC.
  • Oral: What are the possible causes and immediate actions when a running generator’s cooling-water temperature rises? Answer direction: verify the reading, assess load and trends, inform the responsible officer, check cooling flow and temperature controls, and prepare a safe changeover or load reduction if required.

Source: DGS STCW Annual Report 2024, engineering.

4.4 Philippines: Officer in Charge of an Engineering Watch

In the Philippines, MARINA uses Officer in Charge of an Engineering Watch (OIC-EW) for the relevant operational-level function. MARINA publishes certification policies and documents referring to theoretical examination and practical assessment. Approved education, onboard training, documentary evidence and the candidate’s assessment route must be checked against the current rules.

Avoid assuming that every candidate faces a separate final oral examination in the same form as the UK or Australia. Ask MARINA or the approved assessment provider how the current theoretical and practical assessments are conducted.

Original practice examples:

  • Theory: What is the purpose of an oily-water separator and its oil-content monitor?
  • Practical/scenario: Demonstrate how you would respond to an unexpected purifier fuel-oil leak, including communication, fire prevention and containment.

Answer direction: An approved separator and monitoring arrangement help process and monitor machinery-space bilge water; discharge is allowed only when all applicable conditions are met. For the leak, raise the alarm as needed, eliminate immediate risks, isolate safely under procedures and prevent oil from reaching hot surfaces or drains.

Sources: MARINA circulars and MARINA OIC-EW theoretical and practical assessment documentation.

4.5 United States: Third Assistant Engineer

The United States Coast Guard’s National Maritime Center publishes national examination topics and sample examinations for Third Assistant Engineer, unlimited. Its listed modules include motor plants, gas-turbine plants, engineering safety and environmental protection, general subjects, electricity and control engineering, and steam plants. The exact modules depend on the propulsion endorsement and the Coast Guard’s evaluation of the application.

A US national endorsement and an STCW endorsement are related but distinct parts of the credentialing system. Candidates should check the requirements for both when their intended service requires them. The US should not be described as having the same final oral examination as all other countries: the required assessments depend on the credential and route.

Original practice examples:

  • Multiple choice: What is the main purpose of a relief valve in a positive-displacement pump system? Answer: To protect against excessive pressure by providing a suitable relief path.
  • Application: A motor-driven pump runs but delivers little liquid. List possible causes. Answer direction: low suction level, blocked strainer, air entry, closed valve, incorrect rotation or damaged pump components, checked safely.

Sources: USCG motor, gas-turbine and safety modules and general, electrical and steam modules.

4.6 Canada: Fourth-class Engineer

A Fourth-class Engineer certificate with the appropriate STCW endorsement is a relevant Canadian pathway to engineering watchkeeping. Its name must not be confused with a shipboard fourth engineer rank. Transport Canada publishes TP 14511, a set of specimen examination questions, and TP 14609, a study guide for applicants seeking the STCW endorsement.

A Transport Canada bulletin on STCW requirements lists examination subjects and an oral examination in Maritime Law and Ship’s Business for the fourth-class STCW route described there. Candidates should use current legislation and Transport Canada’s examination publication for their particular case.

Original practice examples:

  • Written: Explain why a centrifugal pump may lose suction and how an operator should respond.
  • Oral: What records and reports are important after an accidental machinery-space oil spill? Answer direction: contain the spill safely, notify the appropriate officers, follow the ship’s emergency and reporting procedures, and ensure accurate entries and any external notifications required by the competent authority.

Sources: Transport Canada specimen questions, STCW study guide and STCW requirements bulletin.

4.7 Australia: Engineer Watchkeeper

The Australian Maritime Safety Authority issues the Engineer Watchkeeper certificate. AMSA identifies medical, sea-service and course requirements and requires eligible candidates to pass an oral examination. The educational assessments needed before that stage depend on the approved pathway; it would be misleading to claim one identical AMSA-written paper applies to all candidates.

AMSA’s oral-exam preparation page provides study resources and says it does not publish a separate oral examination checklist for Engineer Watchkeeper. Use the approved course materials and the relevant syllabus.

Original practice examples:

  • Course assessment: Explain the basic operating principle of a plate heat exchanger and list causes of poor cooling.
  • Oral: What would you do if a high bilge-level alarm occurred in an unattended machinery space? Answer direction: respond promptly and safely, identify the source and flooding risk, summon assistance and inform the bridge or chief engineer as required; control the source and manage bilge water in accordance with pollution rules.

Sources: AMSA Engineer Watchkeeper and preparing for an AMSA oral exam.

4.8 New Zealand: Marine Engineer Class 3

Maritime New Zealand’s Marine Engineer Class 3 (MEC 3) guidance describes approved qualifications, training, sea service, ancillary certificates and a final examination. The candidate may follow a motor, steam or combined pathway, as applicable. Maritime NZ’s general training guidance describes the final examination as an oral examination based on the relevant competencies.

Original practice examples:

  • Course assessment: Describe the function of a diesel-engine lubricating-oil cooler and the likely consequences of contamination.
  • Oral: You receive a crankcase oil-mist alarm. What are your immediate priorities? Answer direction: follow the maker’s and ship’s emergency procedures, protect personnel, notify the chief engineer and bridge as appropriate, and do not open the crankcase while a dangerous hot spot or explosive atmosphere may exist.

Sources: MEC 3 certificate guidance and Maritime NZ training and final examinations.

4.9 South Africa: Engineer Officer of the Watch

SAMSA publishes a Level 3 engineer officer oral-examination syllabus guideline that includes the Engineer Officer of the Watch, STCW III/1. The guideline describes the oral assessment in terms of safe and efficient plant operation, ship safety and environmental protection. Candidates should confirm that they have the latest applicable edition and should check their course, sea-service and other assessment requirements directly with SAMSA.

Original practice examples:

  • Technical: Describe the starting and protective arrangements of an emergency fire pump.
  • Oral: What would you do if you discovered fuel spraying near a hot exhaust surface? Answer direction: raise the alarm, keep clear, stop or isolate the fuel source safely under the emergency procedure, notify the responsible officers and prepare an appropriate fire response.

Source: SAMSA engineer officer oral syllabus guideline.

4.10 Singapore: Marine Engineer Officer

Singapore uses a numbered system of Marine Engineer Officer certificates. Class 5 is a relevant early-career pathway, but the exact functions and restrictions must be confirmed with the MPA for the certificate sought. MPA application materials distinguish written and oral examinations. A published Class 5 guideline from 2004 describes an oral examination and route-dependent written preparation or exemptions; because it is historical, it should be used for orientation only, not as the final word on today’s process.

Original practice examples:

  • Written-style: Explain the purpose of a settling tank, service tank and fuel purifier in a fuel treatment system.
  • Oral: Describe the checks required before manually synchronising an incoming generator. Answer direction: appropriate voltage, frequency, phase sequence and phase relationship, with the synchronising method and closing procedure specified for the installation.

Sources: MPA application for marine engineer examinations and historical Class 5 guidance.

4.11 Pakistan: Marine Engineer Officer Class IV

Pakistan’s Mercantile Marine Department publishes a foreign-going Marine Engineer Officer Class IV written/oral examination category. The fee listing alone does not establish the complete current syllabus, competence mapping, exemptions or individual eligibility, so obtain those details from the department before applying.

Original practice examples:

  • Written-style: Explain the causes of an auxiliary boiler low-water alarm and the associated dangers.
  • Oral: What would you do after a steering-gear power-unit failure? Answer direction: inform the bridge immediately, follow steering-gear emergency procedures, assist with the changeover or emergency arrangement as authorised, and report the equipment condition.

Source: Pakistan Mercantile Marine Department examination categories.


5. How should a student answer examination questions?

5.1 A useful structure for written answers

For a question about equipment, arrange your answer in this order:

  1. Purpose: What does the equipment do?
  2. Main components: What are its important parts?
  3. Operating principle: How does it work?
  4. Safety and protection: What hazards, alarms or trips apply?
  5. Maintenance and faults: What might fail, and what should the engineer check?

For a calculation, write the formula, values with units, substitution, result and a brief reasonableness check. Marks may be available for the method even when an arithmetic error occurs.

5.2 A useful structure for oral and emergency answers

A simple sequence is:

Make the situation safe → assess → communicate → act within authority → monitor → report and record.

The order may overlap or change with the emergency. For example, if there is an immediate threat to life, raising the alarm and moving people to safety can happen at once. Do not wait to complete a perfect diagnosis before reporting a serious fault.

Avoid claiming a fixed action applies to every engine or ship. Instead, refer to the actual system, the ship’s emergency procedures, the maker’s instructions and the responsible officer’s authority. Good candidates explain what they know and clearly state when they need to check a manual or ask for assistance.


6. Written examination practice: questions with model answers

These original questions can be answered in paragraphs, diagrams or bullet points, depending on the examination instructions. The model answers show the main points; add labelled sketches when requested.

Written question 1: Explain the four strokes of a four-stroke diesel engine.

Model answer: During the suction stroke, the piston moves down and air enters through the open inlet valve. During compression, the piston moves up and compresses the air, raising its temperature. Near the end of compression, fuel is injected and combustion begins. During the power stroke, expanding gases push the piston down. During the exhaust stroke, the piston moves up and expels exhaust gas through the exhaust valve. The cycle takes two crankshaft revolutions. Valve timing and injection timing vary with engine design.

Written question 2: Describe the main elements of a marine diesel-engine fuel system.

Model answer: A typical system contains storage tanks, transfer pumps, settling and service tanks, treatment equipment such as purifiers, filters, heaters where required, supply and circulation pumps, viscosity or temperature controls, injection equipment and return lines. Its purpose is to deliver clean fuel at the correct pressure, temperature and viscosity for the engine. The arrangement depends on the fuel and engine. Important safety features may include leak detection, shielding, remote shut-off arrangements and fire protection.

Written question 3: Explain why lubricating oil is important.

Model answer: Lubricating oil reduces friction and wear by maintaining an oil film between moving surfaces. It also removes heat, carries contaminants towards filters or treatment equipment, helps prevent corrosion and assists sealing in certain components. The system must maintain adequate oil supply, pressure, temperature and cleanliness. Low pressure or contamination can quickly damage bearings and other moving parts.

Written question 4: Explain the working principle of a centrifugal pump.

Model answer: A rotating impeller gives energy to liquid entering near its centre. Liquid moves outwards and the pump casing converts part of its velocity into pressure. The pump needs adequate liquid at its suction; many designs must be primed before starting. Common problems include air entry, blocked suction, cavitation, worn impellers and mechanical-seal leakage. A centrifugal pump is different from a positive-displacement pump and must be operated according to its design.

Written question 5: Compare a centrifugal pump and a positive-displacement pump.

Model answer: A centrifugal pump transfers energy through a rotating impeller and its flow varies with system resistance. A positive-displacement pump moves a quantity of liquid with each cycle or revolution and can develop dangerous pressure if its discharge is blocked. Consequently, an appropriate pressure-relief arrangement is essential for the positive-displacement system. Both need correct suction conditions, safe operating procedures and protection against running outside their permitted range.

Written question 6: Describe how a purifier separates oil, water and solids.

Model answer: A high-speed rotating bowl creates a strong centrifugal field. Materials with different densities separate: heavier water and solid particles move towards the outside, while lighter oil remains closer to the centre and leaves through the appropriate outlet. Separation quality depends on the machine design, correct assembly, oil characteristics, temperature, flow and maintenance. Modern self-cleaning and water-sealing arrangements vary by manufacturer; use the relevant manual rather than assuming one universal operating sequence.

Written question 7: Explain the purpose of an auxiliary boiler and its safety devices.

Model answer: An auxiliary boiler produces steam for services that may include heating fuel, cargo, accommodation or domestic water, depending on the ship. Protective devices can include water-level alarms and burner cut-outs, pressure controls, safety valves and flame-failure protection. They must be maintained and tested as required. A low-water condition is dangerous because exposed heating surfaces can overheat; stop firing and follow the approved procedure rather than immediately adding water to an overheated boiler.

Written question 8: Explain how two AC generators are synchronised.

Model answer: Before connecting an incoming generator to a live busbar, an authorised engineer checks the correct phase sequence, compatible voltage, closely matched frequency and the correct phase relationship at the moment of closing. The synchronising equipment and manufacturer’s closing procedure are used. After connection, real and reactive load sharing are adjusted through the appropriate governor and excitation controls. Incorrect synchronising can cause severe electrical and mechanical damage.

Written question 9: Explain the difference between a circuit breaker and an overload relay.

Model answer: A circuit breaker opens an electrical circuit and provides protection according to its design and settings; some breakers provide short-circuit and overload protection. An overload relay monitors current or thermal conditions and normally acts through a contactor or control circuit to protect a motor from sustained overload. A suitable coordinated protection system may include both. Only authorised persons should adjust protection settings or investigate live equipment.

Written question 10: Describe the safe maintenance of a pump.

Model answer: Review the job, risk assessment, permit and manual. Inform affected personnel. Stop the pump and isolate all relevant energy sources, including electrical power, pressure, liquid, steam or automatic starting. Lock and tag as required and verify isolation. Close the correct valves, drain and depressurise safely, and use suitable PPE. Inspect, repair and reassemble the equipment with correct parts and clearances. Remove tools, restore the system under control, test for performance and leaks, and record the work and defects.

Written question 11: Explain the purpose of an oily-water separator.

Model answer: An approved oily-water separator helps remove oil from machinery-space bilge water. The associated oil-content monitor and discharge control provide safeguards against excessive oil content. The equipment must not be bypassed or manipulated. A reading of 15 ppm or less is not by itself permission to discharge: all applicable MARPOL, special-area, port, coastal-State, flag-State and company conditions must be met. Oil residues and bilge operations must be handled and recorded as required.

Written question 12: Describe the first actions after discovering an engine-room fire.

Model answer: Raise the alarm and inform the bridge. Protect life and escape routes, and alert personnel. If the fire is small and it is safe and appropriate to do so, use the correct extinguisher while maintaining an escape route. Stop fuel or ventilation supplies and isolate machinery only in accordance with the emergency plan and the command structure. For a major fire, withdraw and muster; prepare fixed firefighting arrangements under the master’s and emergency team’s direction. Do not re-enter until properly authorised.

Written question 13: Explain the relationship between the ISM Code and a planned maintenance system.

Model answer: The ISM Code requires the company’s safety management system to include procedures for maintaining the ship and equipment in accordance with relevant rules and company requirements. A planned maintenance system is a common way to schedule, record and monitor this work, but the Code does not prescribe one universal software package. The engineer reports non-conformities, maintenance, equipment failures and corrective actions through the company’s system. See the IMO’s ISM Code overview.

Written question 14: Explain how machinery maintenance can affect fuel consumption.

Model answer: Dirty filters, fouled coolers, poor fuel atomisation, air leaks, incorrect settings, damaged turbocharger components and worn machinery can reduce efficiency or cause abnormal operation. Correct maintenance can restore performance and help reduce fuel consumption when the fault is actually responsible for the loss. Compare data at similar load and operating conditions; weather, fuel quality and vessel operation also affect consumption. A single reading does not prove that maintenance saved fuel.


7. Worked engineering calculations

Calculation 1: Daily fuel consumption from SFOC

Question: A main engine produces 5,000 kW for 24 hours. Its specific fuel oil consumption (SFOC) is 180 g/kWh. Calculate fuel consumption.

Method:

Fuel mass = power × time × SFOC

= 5,000 kW × 24 h × 180 g/kWh

= 21,600,000 g = 21,600 kg = 21.6 tonnes.

This is an idealised calculation. Actual consumption changes with load, fuel, engine condition and operating conditions.

Calculation 2: Generator fuel consumption per hour

Question: A generator supplies 1,000 kW at 220 g/kWh. Calculate its hourly fuel consumption.

1,000 kW × 220 g/kWh = 220,000 g/h = 220 kg/h.

If it operates at the same load for 10 hours, the estimated consumption is 2,200 kg. Do not assume the same SFOC at every load.

Calculation 3: Energy contained in fuel

Question: One tonne of fuel has a lower heating value of 42.7 MJ/kg. How much chemical energy does it contain?

1 tonne = 1,000 kg.

Energy = 1,000 × 42.7 = 42,700 MJ, or 42.7 GJ.

This is the fuel’s chemical energy, not the useful shaft or electrical output. The latter is lower because of energy losses.

Calculation 4: Approximate three-phase electrical power

Question: A balanced three-phase system operates at 440 V line voltage, 100 A line current and a power factor of 0.8. Calculate real power.

P = √3 × V × I × power factor

= 1.732 × 440 × 100 × 0.8

= 60,966 W ≈ 61.0 kW.

Use the appropriate voltage and current definitions, and distinguish real power in kW from apparent power in kVA.

Calculation 5: Motor current using Ohm’s law

Question: A simple DC circuit has a voltage of 24 V and a resistance of 8 Ω. Find the current.

I = V / R = 24 / 8 = 3 A.

This is a basic DC example. Real marine AC motor circuits require consideration of impedance, phase, power factor and starting conditions.

Calculation 6: Heat removed by a freshwater cooler

Question: Fresh water flows through a cooler at 50 m³/h and leaves 10°C cooler. Assume density = 1,000 kg/m³ and specific heat capacity = 4.18 kJ/(kg·°C). Estimate the heat removed.

Mass flow = 50 × 1,000 = 50,000 kg/h.

Heat removed = mass flow × specific heat × temperature difference

= 50,000 × 4.18 × 10 = 2,090,000 kJ/h.

Divide by 3,600 seconds per hour: 2,090,000 / 3,600 = approximately 581 kW.

The result assumes steady conditions and the stated water properties.

Calculation 7: Hydraulic power of a pump

Question: A pump delivers fresh water at 50 m³/h through a total head of 25 m. Assume density 1,000 kg/m³ and gravitational acceleration 9.81 m/s². Find the hydraulic power delivered to the water.

Flow, Q = 50 / 3,600 = 0.01389 m³/s.

Hydraulic power = density × gravity × flow × head

= 1,000 × 9.81 × 0.01389 × 25 = approximately 3.41 kW.

The required motor input will be higher because the pump and motor are not 100% efficient. If pump efficiency were 70%, the pump shaft input would be approximately 3.41 / 0.70 = 4.87 kW, before any motor losses.

Calculation 8: Overall fuel-to-electricity efficiency

Question: A generator produces 1,000 kW and consumes 230 kg of fuel per hour. Fuel lower heating value is 42.7 MJ/kg. Estimate electrical efficiency.

Fuel-energy input = 230 × 42.7 = 9,821 MJ/h.

Convert to kW: 9,821 × 1,000 / 3,600 ≈ 2,728 kW.

Efficiency = output / input = 1,000 / 2,728 ≈ 36.7%.

This simplified calculation assumes stable conditions and the stated fuel-energy value.

Calculation 9: Bilge-tank capacity

Question: A rectangular tank is 2.0 m long, 1.5 m wide and filled to a liquid depth of 0.8 m. What is the approximate liquid volume?

Volume = length × width × depth = 2.0 × 1.5 × 0.8 = 2.4 m³.

For a real tank, use the ship’s calibrated sounding or ullage tables, including applicable trim and list corrections. Internal structure and irregular shape affect actual volume.

Calculation 10: Stability and a vertical weight movement

Question: A ship has a displacement of 10,000 tonnes. A 20-tonne weight is moved vertically upwards by 4 m. Estimate the rise of the ship’s centre of gravity, G.

GG₁ = weight moved × vertical distance / displacement

= 20 × 4 / 10,000 = 0.008 m, or 8 mm.

With other factors unchanged, GM decreases by approximately 0.008 m. This simple example does not include free-surface effects, cargo operations or changes in displacement.


8. Oral examination question bank: 84 questions and model answers

These are original study questions, not official past-examination questions. A real examiner may ask follow-up questions, request a sketch, present additional faults or expect you to relate the answer to equipment on your own ship.

A. Main engines, combustion and propulsion

1. What is the difference between a two-stroke and a four-stroke engine?
A two-stroke engine completes its operating cycle in one crankshaft revolution; a four-stroke engine completes it in two. Both require air supply, compression, combustion, expansion and exhaust, but the timing and gas-exchange arrangements differ. Many large low-speed main engines are crosshead two-stroke engines, while many generator engines are four-stroke engines. These are common examples, not universal rules.

2. What is the purpose of the crosshead in a large diesel engine?
The crosshead connects the piston rod to the connecting rod and guides the piston’s movement. It transfers side forces to the guide surfaces rather than directly to the cylinder liner. This arrangement also separates the crankcase from the scavenge space through an appropriate stuffing-box arrangement.

3. One cylinder has a much higher exhaust temperature than the others. What might cause it?
Possible causes include a faulty or poorly atomising fuel injector, incorrect injection timing, over-fuelling, poor air supply, a damaged exhaust valve or inaccurate temperature measurement. Confirm the reading, compare load and other cylinder data, inform the responsible officer and follow the maker’s diagnostic procedure. Do not assume that one temperature reading identifies the fault.

4. What would you do if main-engine lubricating-oil pressure became dangerously low?
Treat it as an urgent machinery condition. Check the alarm and actual pressure from a safe position, call the chief engineer and advise the bridge promptly because propulsion may be affected. Ensure the standby pump operates if the system and procedures permit. Check obvious causes such as oil level, filters and leaks. Follow protective trips, load-reduction or stopping procedures; never defeat a trip to keep the engine running.

5. What is an oil-mist detector?
It is a protective device that monitors for an abnormal concentration of oil mist in an engine crankcase, where fitted. Oil mist can form when oil contacts a hot surface and may indicate a dangerous bearing or other hot spot. The system can initiate an alarm and a protective action according to the installation. It does not replace proper maintenance or safe investigation.

6. What would you do after a crankcase oil-mist alarm?
Follow the ship’s and maker’s immediate protective procedures, notify the chief engineer and bridge as appropriate, and keep people clear of a possible explosion. Do not open crankcase doors while a hot spot, flammable mist or pressure hazard may exist. Allow the maker-specified cooling and verification process, isolate the engine and investigate only when authorised and safe. The exact sequence depends on the engine.

7. What is a scavenge fire?
It is a fire involving combustible deposits, oil or fuel in the scavenge-air space of an engine. It may be indicated by abnormal temperatures, smoke or other alarms, depending on the system. Inform the responsible officers, follow the engine maker’s scavenge-fire procedure and coordinate any load change with the bridge. Do not improvise an extinguishing method or open access doors into an active fire.

8. What is the purpose of a turbocharger?
A turbocharger uses exhaust-gas energy to drive a compressor that supplies air to the engine. Increased air supply supports more complete combustion and permits greater power output for a given engine size. Clean air and gas passages, good bearings, correct lubrication and monitoring are necessary for reliable operation.

9. What is turbocharger surging?
Surging is an unstable airflow condition in the compressor, often accompanied by noise, vibration or fluctuating pressures. Causes can include fouling, restricted air or exhaust flow, rapid load changes or matching problems. Assess the engine condition, inform the responsible officer and follow the maker’s instructions. Do not put personnel close to hazardous rotating or hot equipment.

10. Why is starting air treated as a safety concern?
Starting air is stored at high pressure and can cause injury if released unexpectedly. Oil carryover and faulty non-return or starting valves can also contribute to fire or explosion hazards in starting-air systems. Drain and maintain equipment as instructed, isolate and depressurise before work, and never loosen pressurised fittings.

B. Fuel, lubrication and auxiliary machinery

11. Why are fuel settling and service tanks used?
A settling tank allows some water and heavier contamination to separate before further treatment. The service tank supplies conditioned fuel to the consuming equipment. Separation, heating and transfer arrangements vary with fuel and ship design. Tanks must be monitored to prevent overflow, contamination and supply interruption.

12. Why is fuel viscosity controlled?
The injection system needs fuel with suitable flow and atomisation characteristics. Some fuels require heating or other conditioning to reach the viscosity specified by the equipment manufacturer. Incorrect viscosity can affect injection, combustion, wear and leakage. Always use the maker’s permitted operating range and the correct fuel-specific procedure.

13. What could cause a purifier to overflow?
Possible causes include an incorrectly assembled bowl, incorrect operating conditions, water-sealing problems on a design that uses a seal, excessive flow, faulty valves, blocked outlets or unsuitable fuel temperature. Stop or change over the unit safely as required, contain the spill, remove fire hazards and investigate using the correct manual. Do not assume every purifier has the same sealing arrangement.

14. What safety checks are needed before starting a purifier?
Check that maintenance is complete, guards and the bowl are correctly assembled, required services and lubrication are available, valves are correctly set and the machine is clear for start. Follow the manufacturer’s start-up sequence and monitor vibration, leakage, temperature and alarms. Never open or interfere with a rotating bowl.

15. What is the risk of mixing different fuel oils?
Some fuels can be incompatible and form sludge when mixed, causing blocked filters or unstable treatment. The risk depends on the actual fuels, and compatibility is different from compliance with a specification. Follow the ship’s fuel-management plan, segregate where appropriate and use suitable tests and supplier information before mixing.

16. What should you check before transferring fuel between tanks?
Confirm the transfer plan, receiving capacity, sounding or ullage, tank identification, valve line-up, communication, level alarms, overflow arrangements and pollution-prevention equipment. Start in a controlled manner and monitor levels and connections throughout. Stop immediately if the line-up is uncertain or a leak or overflow develops.

17. Why can a centrifugal pump run without delivering water?
The pump may be unprimed or air-bound, the suction tank may be empty, a suction valve may be closed, a strainer blocked or air may be entering the suction line. Incorrect rotation, severe wear or a blocked discharge can also affect performance. Check the conditions safely and follow the pump procedure; do not allow prolonged dry running if it can damage the pump.

18. What is cavitation in a pump?
Cavitation occurs when local pressure falls sufficiently for vapour bubbles to form and then collapse as pressure recovers. It can cause noise, vibration, poor delivery and erosion. Causes can include insufficient suction head, hot liquid or excessive suction restriction. Restore suitable suction conditions and operate within the pump’s specified limits.

19. Why is a relief valve important in a positive-displacement pump system?
A positive-displacement pump continues to move liquid and can rapidly develop excessive pressure if the discharge is restricted. A suitable relief arrangement protects the pump and piping by providing a controlled path when the set pressure is reached. The valve must be correctly sized, set and maintained; it is not a substitute for correct valve line-up.

20. What are common causes of poor heat-exchanger performance?
Fouling or scale, blocked strainers, inadequate flow, air locks, incorrect valve settings, leakage or excessively warm cooling water can reduce heat transfer. Compare inlet and outlet temperatures and pressures with normal values at similar loads. Isolate and clean the equipment only under the approved work procedure.

21. What is the purpose of an air compressor’s intercooler?
It cools air between compression stages, reducing the work required in the next stage and helping manage the temperature of the compressed air. Moisture can condense and must be removed through the designated drains and separators. Poor cooling can increase temperature and affect compressor reliability.

22. Why are starting-air receivers drained?
Draining removes accumulated water and some oil contamination, reducing corrosion and carryover into the air system. Drains must be operated according to the system procedure and with attention to the pressure hazard. The receiver, relief devices and non-return arrangements also require inspection and maintenance.

23. What is the purpose of a freshwater generator on many ships?
It produces freshwater, often by evaporating seawater under reduced pressure using available heat and then condensing the vapour. The product-water quality and salinity are monitored before water is sent to the designated tank. Operation depends on the maker’s instructions and local pollution or port restrictions, where applicable.

24. What would you do when an auxiliary boiler indicates dangerously low water level?
Treat the alarm as serious, stop firing or confirm that the protective burner cut-out has operated, inform the chief engineer and follow the boiler’s emergency procedure. Do not immediately introduce water into an overheated boiler; a sudden addition can be dangerous. Verify conditions and allow inspection and recovery only in accordance with the maker’s and ship’s instructions.

25. Why is boiler-water treatment necessary?
Correct treatment helps control scale, corrosion, foaming and carryover. It involves sampling, testing, maintaining the required chemical conditions and blowdown where appropriate. The correct limits and chemicals depend on the boiler and treatment supplier. Poor treatment can reduce heat transfer and lead to tube or system damage.

26. What is the function of a refrigeration compressor?
It draws low-pressure refrigerant vapour from the evaporator and compresses it to a higher pressure and temperature for delivery to the condenser. The refrigerant then rejects heat, expands and returns to the evaporator. Refrigerants have different safety and environmental properties, so leak response, handling and maintenance require the correct training and procedures.

C. Electrical, control and automation

27. What conditions must be checked before synchronising an incoming AC generator?
Check phase sequence, voltage, frequency and phase angle using the approved synchronising equipment. The incoming machine must be stable and the breaker closed at the correct phase relationship in accordance with the installation’s instructions. A mistake can cause large currents, torque shocks and damage.

28. What is phase sequence?
It is the order in which the phases of a three-phase AC supply reach their corresponding points in the cycle. Incorrect phase sequence between a generator and a live busbar prevents safe synchronising and can create a severe fault if connected. Phase sequence is checked with suitable approved equipment or the installed system.

29. How are real and reactive loads shared between generators?
In a typical parallel AC system, the governor and prime-mover input primarily influence real power, measured in kW. Excitation primarily influences reactive power, measured in kVAr. Actual control arrangements can be automatic or manual, and changes should be made only by trained personnel using the ship’s procedures.

30. What is reverse-power protection?
It detects power flowing from the busbar into a generator beyond the permitted setting, which can occur if the prime mover fails or loses input while the generator remains connected. The protection trips the breaker to help prevent the generator from acting as a motor and damaging the prime mover. Settings are determined by the system design.

31. What should you do after a blackout?
Protect people, inform the bridge and chief engineer immediately, and follow the blackout-recovery checklist. Confirm that emergency power has operated as designed, identify available generating capacity, restore essential services in the specified order and investigate the cause. Coordinate propulsion recovery with the bridge. Avoid repeatedly closing a breaker onto an unresolved fault.

32. What is an earth fault?
An earth fault is an unintended connection between an electrical conductor and earth or the ship’s hull. Its effects depend on the distribution system. Follow the ship’s earth-fault investigation procedure, report the alarm and involve the electrical officer or competent person. Do not open live switchboards or disconnect circuits without authorisation and a safe plan.

33. What is insulation resistance?
It is a measure of how well electrical insulation resists leakage current. A suitable insulation-resistance test can help identify deterioration or moisture, but the correct test voltage, disconnection of sensitive equipment, isolation and interpretation are essential. Only a competent authorised person should test and discharge the circuit in accordance with the maker’s procedure.

34. What is the difference between a fuse and a circuit breaker?
A fuse contains an element that melts under specified overcurrent conditions and normally must be replaced after operation. A circuit breaker opens mechanically and can generally be reset after the cause has been identified and the equipment is safe. Both must be correctly rated and coordinated; never replace a fuse with an improvised conductor.

35. What precautions are required for high-voltage work?
High-voltage work requires specific competence, authorisation, risk assessment and the ship’s approved isolation, locking, testing, earthing and permit procedures. Stored energy and capacitors can remain dangerous after supply disconnection. A junior engineer must not enter, test or work on high-voltage equipment merely because the switch is open.

36. What is the purpose of an uninterruptible power supply, or UPS?
A UPS supplies selected equipment for a limited time when normal power is lost or disturbed. It may support control, communication or monitoring systems, depending on design. Batteries, alarms, charging and capacity require inspection and testing. A UPS is not necessarily capable of supplying all ship services during a blackout.

37. What is the difference between an alarm and a trip?
An alarm warns that a condition needs attention. A trip or shutdown function automatically changes equipment operation when a protective limit or condition is reached. Some systems also provide slowdown or load reduction. Alarms and trips must be understood, maintained and tested; bypassing them without proper authorisation and controls creates serious risk.

D. Watchkeeping and communication

38. What should you check when taking over an engineering watch?
Receive a clear handover of operating machinery, parameters, alarms, defects, maintenance in progress, isolations, bridge instructions, fuel operations and any expected changes. Review logs and standing orders, inspect relevant machinery and confirm communication arrangements. Ask questions and resolve unsafe or unclear matters before accepting the watch.

39. What information should you give when handing over a watch?
Explain the current plant configuration, machinery condition, abnormal readings, alarms, ongoing work, permits and isolations, tank levels, orders and expected operations. Point out urgent issues and confirm that the relieving officer understands them. A written log is important but does not replace a clear verbal handover.

40. What is a periodically unmanned machinery space?
It is an approved operating arrangement in which the machinery space can be unattended for specified periods, subject to the required automatic control, monitoring, alarm, fire safety and other arrangements. The designated duty engineer must be able to respond to alarms and fulfil the ship’s procedures. Unattended does not mean unmonitored.

41. Why are machinery-space log readings important?
They create a record of plant operation and help identify trends, developing defects and the effects of operational changes. Record actual readings accurately, include relevant units and report values outside the normal range. Do not copy the previous watch’s figures or alter a record to hide a problem.

42. When should an engineer call the chief engineer?
Follow standing orders and call whenever a situation exceeds your authority or experience, or when safety, propulsion, electrical supply, pollution prevention or major equipment may be affected. Examples include serious abnormal pressure or temperature, fire, flooding, blackout, an unexplained alarm and a significant spill. Call early rather than waiting for the problem to become worse.

43. What should the bridge be told about an engineering problem?
Give a clear description of the problem, its likely effect on propulsion or electrical power, any immediate limitations and the action being taken. Provide updates when the situation changes. The engineer should avoid promising a recovery time that is not supported by evidence. Use clear communication and confirm critical messages.

44. What is engine-room resource management?
It is the effective use of people, information, equipment and procedures to operate the machinery space safely. It includes situational awareness, communication, task allocation, assertiveness, cross-checking, decision-making and managing workload or fatigue. It does not remove the chief engineer’s or other officers’ formal responsibilities.

E. Fire, flooding and personal safety

45. What three elements form the fire triangle?
Heat, fuel and oxygen. Removing or controlling one of these elements can stop combustion, but the correct firefighting method depends on the fuel, equipment, risk to people and fire plan. Never assume that every fire can be extinguished safely with water.

46. What is the difference between an EEBD and breathing apparatus used for firefighting?
An emergency escape breathing device, or EEBD, is intended to help a person escape from a hazardous atmosphere. Firefighter’s self-contained breathing apparatus is designed for authorised firefighting or rescue operations and is used with training and the rest of the required equipment. An EEBD must not be treated as a general-purpose device for entering a smoke-filled space.

47. What must happen before a fixed CO₂ system is released into a machinery space?
Follow the ship’s fixed-firefighting and emergency procedures under the master’s command. Confirm that personnel have evacuated and are accounted for, close the required openings and stop ventilation or fuel supplies as specified, and operate the system only by authorised personnel. Respect the system’s alarms and time delays. The space must remain closed as directed and re-entry must be controlled because CO₂ can be fatal.

48. What should you do if someone collapses inside an enclosed space?
Raise the alarm, summon the trained rescue team and start the ship’s enclosed-space emergency plan. Do not enter impulsively: an unsafe atmosphere can kill rescuers as well. Rescue requires a controlled plan, suitable breathing apparatus and equipment, communications and sufficient trained assistance. Provide first aid when the casualty is safely removed. See IMO Resolution MSC.581(110).

49. What should be checked before enclosed-space entry?
A competent person should lead the risk assessment and permit process; isolate hazards, ventilate as required, test the atmosphere with suitable calibrated equipment, arrange communications, an attendant and rescue arrangements, and use required PPE. Continue monitoring as the procedure requires. Conditions can change during the work, so stop and evacuate if the space becomes unsafe.

50. What is a permit to work?
It is a formal control used for specified hazardous tasks. It identifies the work, location, hazards, isolations, precautions, responsible persons, validity and closure arrangements. A permit does not itself make a job safe: the team must implement and maintain its controls, stop when conditions change and follow the safety management system.

51. What precautions apply to hot work?
Carry out a risk assessment and obtain the required permit. Remove or protect combustible materials, check nearby and adjacent spaces, isolate relevant systems, test the atmosphere when necessary and provide suitable fire protection and a fire watch. Maintain communications and conduct the required checks after work. Special restrictions apply in hazardous areas and on tankers.

52. What is lockout/tagout?
It is a controlled method of isolating hazardous energy and preventing equipment from being operated while people work on it. Depending on the system, isolation may include electrical power, automatic start, pressure, steam, hydraulic energy, moving parts and stored energy. Locks and tags must be accompanied by verification of isolation under the ship’s procedure.

53. What should you do if a high-pressure fuel leak is discovered?
Keep clear and warn others; a fuel jet can penetrate skin and fuel can ignite on hot surfaces. Raise the alarm and arrange a safe reduction or isolation of the source under the ship’s and maker’s procedures. Never use a hand or finger to search for a leak. A suspected injection injury requires urgent medical attention.

54. What would you do in a machinery-space flooding emergency?
Raise the alarm, inform the bridge and chief engineer, protect people and assess the source and rate of flooding. If safe, isolate the source and use appropriate bilge or emergency pumping arrangements according to the ship’s plan. Consider electrical hazards, stability and loss of essential machinery. Keep the bridge informed and do not enter a dangerous space alone.

55. How should a person respond to an electrical shock casualty?
Do not touch the casualty until the electrical source is isolated or the casualty is separated from it using an approved safe method by trained personnel. Raise the alarm and obtain medical assistance. Once safe, assess breathing and provide CPR or use an AED if trained and indicated, following current first-aid guidance and the ship’s medical procedures.

F. Pollution prevention and regulations

56. What is MARPOL?
MARPOL is the International Convention for the Prevention of Pollution from Ships. It contains six technical annexes covering oil, noxious liquid substances in bulk, harmful substances in packaged form, sewage, garbage and air pollution. Applicability and detailed requirements vary by ship, substance, operation and location. Engineers are especially involved in oil, sewage, garbage and air-emission controls.

57. Is bilge water automatically legal to discharge if the monitor shows less than 15 ppm?
No. The oil-content limit is only one part of the applicable machinery-space discharge conditions. The equipment, ship’s status and location, applicable special-area provisions, local restrictions and other requirements must also be satisfied. Follow the approved arrangement and discharge procedures; never dilute a sample or bypass a monitor. Retain or deliver waste ashore when discharge is not permitted.

58. What is the Oil Record Book Part I?
It is the record used, where required, for specified machinery-space oil operations. Entries can include applicable collection, transfer, processing and disposal operations, in the form and circumstances required by the regulations. Records must be accurate, timely and complete; do not invent an entry or conceal an accidental discharge. The responsible officer should verify the applicable instructions and sign as required.

59. What is SOPEP?
A Shipboard Oil Pollution Emergency Plan is a ship-specific plan required for applicable vessels. It provides guidance on reporting and response to oil-pollution incidents and identifies contacts and procedures. The engineer should know the plan, the alarm and reporting arrangements, and the location of spill-response equipment.

60. Can all ship garbage be thrown overboard if the ship is far from land?
No. MARPOL Annex V restricts garbage discharge, with different conditions for particular categories and special areas; plastics are generally prohibited from discharge except in limited convention exceptions. Follow the garbage management plan and current rules, segregate waste and use reception facilities as required. Distance alone is not a universal permission.

61. What is the difference between sewage treatment and an oily-water separator?
A sewage treatment plant deals with wastewater covered by the relevant sewage rules and its approved design. An oily-water separator deals with oily machinery-space bilge water. The systems, operating requirements and discharge conditions are different; one is not a substitute for the other.

62. What is SEEMP?
The Ship Energy Efficiency Management Plan is a ship-specific management tool under the applicable MARPOL Annex VI framework. Depending on the ship and requirements, it addresses energy-efficiency measures and relevant fuel-consumption or carbon-intensity processes. Engineers contribute through accurate data, efficient operation and maintenance. SEEMP does not replace mandatory safety or environmental procedures.

63. How can an engineer reduce air pollution?
Operate and maintain equipment in accordance with the approved procedures; use compliant fuel and applicable changeover procedures; monitor combustion and emission-control equipment; report defects; and maintain required records. The applicable sulphur, nitrogen-oxide and other requirements depend on the ship, engine, fuel, location and current rules.

G. Maintenance, repairs and human factors

64. What is a planned maintenance system?
It is an organised method of identifying, scheduling, carrying out and recording maintenance. Tasks may be based on running hours, calendar time, inspections or condition, depending on the equipment and company system. A good record includes the work, findings, parts used, outstanding defects and next action.

65. What is the difference between preventive, corrective and condition-based maintenance?
Preventive maintenance is planned to reduce the probability of failure, often at set intervals. Corrective maintenance repairs a fault after it has been found. Condition-based maintenance uses information such as vibration, oil analysis or temperature trends to help decide when work is needed. A ship may use all three approaches.

66. What is critical equipment?
Within the company’s safety management system, it is equipment whose sudden operational failure may create a hazardous situation, identified and managed under applicable requirements and company procedures. Examples may include certain steering, propulsion, electrical or safety systems, depending on the ship. Critical equipment needs appropriate inspection, testing, maintenance and contingency arrangements.

67. What is the first step before dismantling machinery?
Understand the job and its hazards, consult the manual and obtain authorisation. Plan the work and isolate all relevant energy sources, including automatic starting, electrical power, pressure and stored energy. Verify isolation before opening the equipment. The exact order of permits and isolations follows the ship’s procedure.

68. How would you safely change a pump’s mechanical seal?
Plan the work, isolate electrical and fluid systems, prevent automatic start, drain and verify zero pressure. Dismantle using the maker’s instructions, protect sealing surfaces and install the correct parts. Reassemble with specified settings, restore the system under control, check for leakage and abnormal vibration, and record the work. Do not work on a hot, pressurised or rotating pump.

69. Why are torque settings important?
Correct tightening helps achieve the intended clamping force without damaging threads or components. Too little force can cause leakage or loosening; too much can stretch or damage fasteners. Use the correct calibrated tool, tightening sequence, lubrication condition and values specified by the manufacturer.

70. What should be done if an essential spare part is missing?
Inform the chief engineer, assess the effect on equipment availability and safety, and follow the company’s defect-reporting and procurement process. Consider approved alternatives or operating restrictions only after a proper risk assessment and authorisation. Do not install an unsuitable part or hide the deficiency.

71. Why is a risk assessment necessary before a job?
It identifies hazards, considers who or what may be harmed, and selects controls such as isolation, ventilation, protective equipment, supervision and emergency arrangements. The assessment should reflect the actual job and changing conditions. A generic form that nobody reads does not control a hazard.

72. How can fatigue affect watchkeeping?
Fatigue reduces attention, memory, judgement and reaction time. It can increase errors during repetitive monitoring and complex emergencies. Follow applicable hours-of-rest rules, report fatigue, arrange suitable relief and avoid accepting a watch when not fit to perform it safely. Emergencies and exceptions must be managed under applicable rules and company procedures.

73. What should you do if a senior person gives an instruction that appears unsafe?
Raise the concern clearly and respectfully, explain the hazard and ask for clarification. Stop or do not start the work if there is an immediate danger, following the company’s stop-work and reporting procedures. Good teamwork allows safety concerns to be heard regardless of rank.

74. Why is accurate maintenance documentation important?
It tells the next engineer what was done, what condition was found, which parts were fitted and what remains outstanding. It supports trend analysis, planning and compliance. Records should reflect actual work and measured results; signing for work that was not completed can conceal a serious defect.

H. New technologies and additional ship-specific topics

75. What are important LNG-related hazards for an engineer?
LNG and natural gas can present flammability, asphyxiation and cryogenic hazards. Gas detection, ventilation, hazardous-area controls, emergency shutdown, suitable PPE and approved bunkering procedures are important. The engineer must complete training and hold any endorsements required for the assigned duties on an IGF ship. Follow the specific fuel-system manual.

76. What are important methanol-related hazards?
Methanol is toxic and flammable. Exposure routes, leak detection, ventilation, suitable protective equipment and emergency response must be addressed in the ship’s risk assessment and fuel-system procedures. The appearance of a flame and the appropriate detection equipment depend on conditions and design; do not assume a leak or fire will be obvious.

77. What are important ammonia-related hazards?
Ammonia is toxic and can present severe inhalation and chemical-exposure hazards. Fuel systems require design-specific containment, detection, ventilation and emergency arrangements, and personnel need the training applicable to their duties. Follow the ship’s approved procedures and do not approach a suspected release without the correct protection and authorisation.

78. What hazards can arise from marine battery systems?
Depending on battery chemistry and design, hazards can include electric shock, short circuit, fire, toxic gases and thermal runaway. Controls include approved access, isolation, monitoring, cooling and emergency procedures. Only personnel authorised and trained for the installed system should work on it; a conventional electrical isolation point may not remove every stored-energy hazard.

79. Why is cybersecurity relevant to the engine room?
Machinery control, monitoring and maintenance systems may depend on connected computers and networks. Unauthorised devices, malicious software or uncontrolled changes can affect availability or data integrity. Follow company rules for access, software updates, removable media, backups and incident reporting; do not connect personal devices without permission.

80. Why is English important for engineering officers?
English supports communication with multinational colleagues, the bridge, shore staff and service engineers, and helps officers understand manuals and safety information. Clear, short phrases, correct equipment names and confirmation of critical instructions reduce misunderstanding. If an instruction is unclear, ask the speaker to repeat or explain it.

81. Why does a third engineer need basic stability knowledge?
Machinery-space flooding, liquid transfer and the movement of heavy equipment can affect the ship’s condition. An engineer should understand the importance of tank levels, watertight integrity and free-surface effects, and report changes to the responsible officers. Stability calculations and operational decisions must follow the ship’s approved information and the master’s direction.

82. What are your duties during bunkering?
They depend on the assigned role and the ship’s bunkering plan. Duties may include checking tank capacity and valve line-up, maintaining communication, monitoring soundings and pressures, checking connections and scuppers, and watching for leaks. Follow the checklist, assigned responsibilities, applicable regulations and emergency stop procedure.

83. What would you do if fuel overflowed during bunkering?
Stop the transfer using the agreed emergency communication and shut-down arrangements, raise the alarm and inform the responsible officers and terminal. Protect people, contain the spill using suitable equipment if safe, and prevent oil entering the sea. Follow the ship’s spill-response plan and applicable reporting requirements. Do not resume until authorised and the cause has been addressed.

84. What should you do if you do not know the answer in an oral examination?
State honestly what you understand, explain the immediate safe action and identify the information or assistance you would seek. You might say: “I would make the equipment safe, inform the chief engineer and check the maker’s instructions before proceeding.” Do not invent a setting, procedure or legal limit. The examiner may help you demonstrate your reasoning through further questions.


9. Scenario-based oral questions and suggested responses

In these exercises, imagine that the examiner asks further questions after each answer. Explain what you would do first, whom you would tell, what could happen next and which procedures control the operation.

Scenario 1: Blackout during manoeuvring

Situation: The ship is approaching port. The running generator trips and the main switchboard loses power.

A good answer should include:

  1. Inform the bridge and chief engineer immediately. Propulsion and steering may be affected.
  2. Follow the blackout and machinery-space emergency procedures.
  3. Check personnel safety and confirm the emergency generator and essential services operate as designed.
  4. Assess the cause and the availability of a standby generator. Restore power in the ship’s specified sequence.
  5. Coordinate restoration of propulsion and auxiliary machinery with the bridge; provide clear updates.
  6. Investigate the trip, protect against recurrence and record the event.

Examiner’s follow-up: “Would you close the breaker again immediately?”

Suggested answer: Not repeatedly or without understanding whether a fault remains. Follow the system’s approved restoration procedure and seek the chief engineer’s direction.

Scenario 2: High cylinder exhaust temperature

Situation: One main-engine cylinder’s exhaust temperature rises above its normal range.

Suggested response: Compare it with other cylinders and the normal trend; verify the indication and inspect related parameters safely. Inform the senior engineer. Consider fuel-injection problems, valve leakage, air supply and measurement faults. Follow the maker’s limits and procedures for load change or stopping, in coordination with the bridge. Record observations and avoid dismantling hot or pressurised components.

Scenario 3: Purifier fuel overflow

Situation: Fuel is escaping from an operating purifier.

Suggested response: Treat the leak as a fire and pollution hazard. Alert the watch team; safely stop, isolate or change over the unit in accordance with the installation and company procedure. Prevent fuel from contacting hot surfaces and entering drains. Contain and clean the spill using suitable equipment. Investigate the flow, temperature, bowl, seals, outlets and valves only when the machine has stopped and is safe. Report and record the defect.

Scenario 4: Steam boiler low-water alarm

Situation: The auxiliary boiler gives a low-water alarm and the burner stops.

Suggested response: Confirm that firing has stopped and alert the chief engineer. Follow the boiler emergency procedure, keep people clear of immediate hazards and check the actual condition using the approved method. Do not rush to add feedwater to an overheated boiler. Investigate the feed system, level controls and leakage only when safe and authorised. Recommission in accordance with the maker’s instructions.

Scenario 5: Oil-content alarm during bilge processing

Situation: The 15 ppm alarm activates while machinery-space bilge water is being processed.

Suggested response: Stop discharge or confirm that the automatic stopping/recirculation arrangement has operated as designed. Check the approved equipment, sampling and operating conditions without bypassing or altering the monitor. Retain the water and inform the responsible officer. Investigate causes such as excessive oil loading, emulsions or equipment problems, and make the required record entries. Resume only when the plant is functioning and all legal conditions are satisfied.

Scenario 6: Engine-room fire caused by an oil leak

Situation: A spray of oil reaches a hot surface and ignites.

Suggested response: Raise the alarm and warn people immediately. If safe and within your training, use the appropriate extinguisher while keeping an escape route. Follow the emergency plan for isolating the fuel source and stopping machinery or ventilation. If the fire cannot be controlled, evacuate and report to the muster station. Fixed firefighting is prepared and operated under the master’s command after personnel are accounted for.

Scenario 7: A person collapses in a tank

Situation: A colleague is seen unconscious inside a tank.

Suggested response: Sound the alarm and start the enclosed-space rescue plan. Do not enter without the authorised rescue team, appropriate breathing apparatus, equipment and support. Arrange medical assistance, communications and the retrieval equipment required by the rescue plan. Give first aid once the casualty is safely removed and rescuers are protected.

Scenario 8: Bunkering tank is filling faster than expected

Situation: The receiving tank approaches its maximum planned level much earlier than expected.

Suggested response: Alert the person in charge and use the agreed communication with the supplier. Stop or reduce transfer according to the plan before an overflow occurs. Verify tank identity, level, valve line-up, transfer rate and available capacity. Do not redirect flow to an unapproved tank. Resume only after the situation is understood and the responsible officer authorises it.

Scenario 9: Standby generator cannot start

Situation: A standby generator fails during its scheduled start test.

Suggested response: Inform the chief engineer and record the defect. Check alarms and basic causes within your authority, such as the approved starting-energy supply, fuel availability, control mode and safety interlocks. Assess the effect on redundancy and required operational precautions. Do not bypass protective devices. Arrange competent repair, testing and any required notifications or operating restrictions.

Scenario 10: Hot bearing after pump maintenance

Situation: A pump bearing becomes unusually hot shortly after maintenance.

Suggested response: Monitor and stop or change over the pump when required by the operating limits and procedure; warn the responsible officer. Consider alignment, lubrication, bearing condition, assembly, excessive load or incorrect clearances. Allow the equipment to cool, isolate and verify safe conditions before inspection. Correct the cause, test the pump and document the findings.


10. Multiple-choice practice examination

Select one best answer for each original question. The answer key follows the questions.

Questions

1. What is the main purpose of a lubricating-oil system?

A. To increase fuel sulphur content
B. To reduce friction and wear and help remove heat
C. To supply drinking water
D. To replace all engine cooling systems

2. Before connecting an incoming generator to a live busbar, which combination is most relevant?

A. Voltage, frequency, phase sequence and phase relationship
B. Fuel colour and tank paint
C. Bilge level and freshwater salinity only
D. Propeller diameter only

3. Which condition can cause cavitation in a centrifugal pump?

A. Adequate suction pressure
B. Excessively low pressure at the pump suction
C. A correctly sized suction pipe
D. A clean strainer and correct tank level

4. What should be done immediately when a serious fuel spray leak is discovered near a hot surface?

A. Test the leak with a finger
B. Keep clear, warn others and follow the emergency isolation procedure
C. Ignore it until the end of the watch
D. Open every nearby valve

5. What is the principal function of a positive-displacement pump relief arrangement?

A. To increase the water’s salinity
B. To protect against excessive pressure
C. To synchronise generators
D. To detect smoke

6. A 15 ppm monitor reading below its limit means that:

A. Discharge is always legal everywhere
B. The Oil Record Book is unnecessary
C. The oil-content reading is one condition; all other applicable discharge requirements must also be met
D. The monitor may be bypassed

7. Which device is intended primarily for escape from a hazardous atmosphere?

A. An EEBD
B. An oil filter
C. A sounding tape
D. A pressure gauge

8. After an oil-mist alarm, which action is unsafe?

A. Following the engine maker’s emergency procedure
B. Keeping personnel clear of a potential explosion
C. Immediately opening the crankcase doors to look inside
D. Informing the appropriate officers

9. What is a common cause of high exhaust temperature in one cylinder?

A. A faulty fuel injector
B. A properly operating injector
C. An accurate temperature sensor by itself
D. A correctly adjusted fuel system

10. What is the most appropriate first response when someone collapses in an enclosed space?

A. Enter alone immediately
B. Raise the alarm and activate the trained rescue plan
C. Ignore the casualty until the next watch
D. Close the access and leave without reporting

11. In a typical parallel generator system, real-power sharing is primarily adjusted through the:

A. Governor and prime-mover input
B. Bilge alarm
C. Freshwater salinometer
D. Purifier sludge tank

12. What can happen if a positive-displacement pump operates against a blocked discharge?

A. Pressure can rise dangerously
B. Pressure must always fall to zero
C. The pump becomes a centrifugal pump
D. No hazard is possible

13. What does a planned maintenance system help the crew do?

A. Schedule and record maintenance
B. Avoid reporting defects
C. Eliminate the need for manufacturer instructions
D. Guarantee that equipment will never fail

14. Which action is appropriate before opening a pump for maintenance?

A. Allow automatic starting to remain available
B. Isolate and verify electrical, pressure and fluid energy sources
C. Remove fasteners while the pump runs
D. Open the casing while pressurised

15. What does a purifier principally use to separate liquids and solids of different densities?

A. Magnetic attraction only
B. Centrifugal separation
C. Radio signals
D. Engine exhaust pressure only

16. Which statement about an EEBD is correct?

A. It is normally intended for escape, not for routine entry to fight a fire
B. It is a substitute for every form of breathing apparatus
C. It is used to measure oxygen
D. It is a type of fire pump

17. What should an engineer do if a boiler has overheated after a low-water condition?

A. Immediately add a large quantity of cold water without assessment
B. Follow the emergency procedure, stop firing and seek the chief engineer’s direction
C. Disable the low-water trip and restart the burner
D. Ignore the alarm

18. Which record is associated with specified machinery-space oil operations, where required?

A. Oil Record Book Part I
B. Cargo manifest only
C. Passenger list only
D. Compass-error book only

19. The operating cycle of a four-stroke engine normally takes:

A. Half a crankshaft revolution
B. One crankshaft revolution
C. Two crankshaft revolutions
D. Four crankshaft revolutions

20. What is the best response when the bridge requests propulsion information during a machinery problem?

A. Give clear, accurate information and update the bridge as the condition changes
B. Promise an exact repair time without evidence
C. Refuse to communicate
D. Hide the loss of machinery availability

21. What is the purpose of a training record book?

A. To document specified supervised training and the candidate’s progress
B. To replace every medical certificate
C. To allow an unqualified person to sign for another’s work
D. To replace the ship’s safety management system

22. A circuit breaker trips after a fault. What is the safest general response?

A. Reclose it repeatedly without checking
B. Report and investigate according to the approved procedure before re-energising
C. Remove all protective devices
D. Bridge the contacts with wire

23. Which fuel property may be controlled by heating to achieve the manufacturer’s injection requirements?

A. Viscosity
B. Colour only
C. Tank name
D. Ship’s draught

24. Which of the following is the most accurate statement about the title “third engineer”?

A. It guarantees exactly the same certificate in every country
B. It is always the same as an electro-technical officer certificate
C. It is a shipboard rank; the applicable certificate and functions depend on the administration and ship
D. It removes the need for supervised training

Answer key and explanations

Question Answer Why
1 B Lubricating oil reduces friction and wear and also carries away heat and contaminants.
2 A A live-busbar synchronising operation requires compatible electrical conditions.
3 B Low local suction pressure can cause vapour bubbles to form and collapse.
4 B A fuel jet and nearby ignition source create an immediate injury and fire hazard.
5 B The relief path protects the pump and system from excessive pressure.
6 C Oil content is only one part of the complete discharge conditions.
7 A An EEBD is intended for escape.
8 C Opening a hot, mist-filled crankcase can trigger or worsen an explosion.
9 A Poor injection can cause abnormal combustion and exhaust temperature.
10 B An uncontrolled rescue can create more casualties.
11 A Prime-mover input primarily controls real load in a typical system.
12 A A positive-displacement pump can develop dangerous pressure against a restriction.
13 A A PMS helps plan, monitor and document maintenance.
14 B Hazardous energy and pressure must be controlled and isolation verified.
15 B A high-speed bowl uses centrifugal separation.
16 A An escape device does not replace firefighting breathing apparatus.
17 B A low-water condition requires a controlled response; rapid refilling can be dangerous.
18 A Part I covers specified machinery-space oil operations.
19 C The four strokes take two crankshaft revolutions.
20 A Accurate updates help the bridge manage navigational risk.
21 A It provides evidence of structured training and assessed tasks.
22 B Re-energising an unresolved fault can cause injury or damage.
23 A Some fuels are conditioned to achieve suitable viscosity.
24 C Rank and certification are related but not identical concepts.

How to use your score: Review each wrong answer and explain the reason aloud. A high multiple-choice score does not replace safe practical performance or a complete understanding of your national syllabus.


11. An eight-week study plan

The following plan is a starting point. Adjust it for your exam date, available time, propulsion endorsement and the subjects specified by your administration.

Week Main topics Suggested practice
1 STCW functions, watchkeeping, engine-room terminology and safety Read the current syllabus; practise watch handover and reporting alarms aloud.
2 Main diesel engines, combustion, fuel injection, starting air and turbochargers Draw a simple engine cycle; answer Questions 1–10 orally; review abnormal exhaust temperatures.
3 Fuel, lubrication, purifiers, pumps, cooling and compressors Draw system flow diagrams; explain common faults; practise safe transfer and isolation.
4 Boilers, steam, refrigeration and heat exchangers Practise low-water, loss-of-cooling and refrigerant-leak scenarios; complete heat-transfer calculations.
5 Generators, distribution, electrical safety, automation and blackout recovery Review synchronising, load sharing, alarms and trips; practise a blackout scenario.
6 Fire, flooding, enclosed spaces, first aid and permits Practise emergency priorities and communication; review the ship’s specific emergency plans.
7 MARPOL, ISM, PMS, maintenance and human factors Explain oil records, discharge restrictions, maintenance isolation and defect reporting.
8 Revision, mock written paper and mock oral Complete the multiple-choice questions, calculations and scenario exercises; revise weak subjects.

A practical daily study routine

  • 20 minutes: Review one system and draw its main flow path.
  • 20 minutes: Answer two questions in writing or complete one calculation.
  • 20 minutes: Explain an oral scenario to a classmate, teacher or recording device.
  • 10 minutes: Learn new technical English terms and abbreviations.
  • 10 minutes: Review mistakes and update a list of questions for your instructor.

If you have less time, focus first on safety, watchkeeping, the official syllabus, your own ship’s systems and the subjects you find most difficult. Avoid memorising a single answer without understanding what to do if the examiner changes the situation.

Suggested mock oral examination

Ask a classmate to act as the examiner. Set aside 30–45 minutes and use the following ten questions:

  1. Describe your responsibilities when taking over a watch.
  2. A generator’s cooling-water temperature rises. What will you do?
  3. Explain the conditions for synchronising an incoming generator.
  4. Describe what happens during a blackout.
  5. How would you respond to a crankcase oil-mist alarm?
  6. Explain the safe isolation of a pump before maintenance.
  7. What are the dangers of entering an enclosed space?
  8. Is a bilge discharge automatically allowed below 15 ppm?
  9. Explain the information you would give the bridge after a serious machinery fault.
  10. Describe one machine you have worked on and explain its normal operation, safety devices and common faults.

The examiner should ask follow-up questions such as “Why?”, “What happens if that fails?” and “Who must be informed?” After the exercise, identify missing safety steps and practise the same topics again.


12. Final preparation checklist

Before the examination

  • I have identified the correct certificate, propulsion type, limitations and national route.
  • I have downloaded the current official syllabus and checked for amendments.
  • I understand which written, digital, practical and oral assessments apply to me.
  • My training record book, service evidence and course documentation have been checked with the competent authority or training provider.
  • I can explain the major systems on a ship I know.
  • I can draw and explain basic fuel, lubrication, cooling, compressed-air and bilge systems.
  • I can explain safe isolation and the permit-to-work process.
  • I know the immediate priorities for fire, flooding, blackout, oil mist and an enclosed-space emergency.
  • I can state when to call the chief engineer and inform the bridge.
  • I can solve basic questions involving units, power, fuel consumption, electrical power and heat transfer.
  • I can explain pollution-prevention rules without assuming that one number alone makes a discharge legal.
  • I have practised clear, concise answers in the language required by my authority.
  • I know where to find the ship’s manuals, safety procedures and emergency plans.

During the examination

  • I will listen to the complete question and ask for clarification if needed.
  • I will address immediate hazards and communication first in an emergency question.
  • I will state assumptions and units in calculations.
  • I will explain my reasoning rather than memorising disconnected phrases.
  • I will be honest when I am unsure and explain how I would obtain reliable guidance.

13. Glossary for maritime students

Term Simple meaning
Alarm A warning that a condition needs attention.
Bilge The lower part of a ship’s space where water or liquid can collect.
Blackout Loss of the normal main electrical supply to the switchboard or relevant system.
Busbar A conductor or set of conductors that distributes electrical power in a switchboard.
Cavitation Formation and collapse of vapour bubbles caused by low local pressure in a liquid.
CoC Certificate of Competency.
Condition-based maintenance Maintenance planned using information about the actual condition of equipment.
EEBD Emergency escape breathing device.
EOOW Engineer Officer of the Watch.
GM Metacentric height, a measure used in basic transverse stability.
IGF Code International Code of Safety for Ships using Gases or other Low-flashpoint Fuels.
IMO International Maritime Organization.
ISM Code International Safety Management Code.
Isolation Separating equipment from hazardous energy, pressure or other sources before work.
MARPOL International convention for preventing pollution from ships.
OICEW / OIC-EW Officer in Charge of an Engineering Watch.
OWS Oily-water separator.
PMS Planned maintenance system.
PPM Parts per million; a way to express a very small concentration.
SEEMP Ship Energy Efficiency Management Plan.
SFOC Specific fuel oil consumption, commonly expressed in grams of fuel per kilowatt-hour.
SOPEP Shipboard Oil Pollution Emergency Plan.
STCW International Convention on Standards of Training, Certification and Watchkeeping for Seafarers.
Trip A protective action that automatically changes or stops equipment operation.
UMS Unattended machinery space; commonly used for a periodically unmanned machinery-space arrangement.
kW / kWh Kilowatt is a unit of power; kilowatt-hour is a unit of energy.

14. Official references and further reading

The following are primary sources or official administration resources. Several national sample-question collections and guidelines are older publications: they remain useful for study, but candidates should verify the latest examination requirements and amendments.

International

  1. IMO: STCW Convention overview.
  2. European Union: Directive (EU) 2022/993, including STCW Regulation III/1.
  3. IMO: MARPOL Convention and its six annexes.
  4. IMO: Prevention of pollution by oil, MARPOL Annex I.
  5. IMO: The ISM Code.
  6. IMO: Revised recommendations for entering enclosed spaces, Resolution MSC.581(110).

National administrations

  1. Iran: https://www.pmo.ir/en/home
  2. Italy: Decree 72 of 7 May 2025, certification requirements; official examination programmes.
  3. United Kingdom: MCA engineering oral examination syllabus; EOOW engineering knowledge examination syllabus; modernised qualification syllabus and transitional arrangements.
  4. India: DGS STCW Annual Report 2024: Engineering; DGS examination and certification.
  5. Philippines: MARINA approved circulars; OIC-EW theoretical examination and practical assessment documentation.
  6. United States: USCG National Maritime Center: engine officer examination modules; Third Assistant Engineer motor, gas-turbine and safety modules; general, electrical and steam modules. The USCG module pages link to sample examinations.
  7. Canada: TP 14511: Fourth-class Engineer specimen questions; TP 14609: Fourth-class Engineer with STCW endorsement study guide; TP 2293: Examination and Certification of Seafarers.
  8. Australia: AMSA Engineer Watchkeeper; AMSA oral-exam preparation.
  9. New Zealand: Maritime NZ MEC 3 certificate guidance; Maritime NZ training and final examination.
  10. South Africa: SAMSA engineer officer oral-examination syllabus guideline.
  11. Singapore: MPA marine engineer officer application; historical Class 5 examination guideline.
  12. Pakistan: Mercantile Marine Department: examination categories.

For instructors: The question bank can be adapted into classroom discussions, simulator exercises, written tests and individual mock oral examinations. Encourage students to connect each answer with their own ship or simulator and to identify the authority, manual and procedure that would control the real operation.

4.5/5 - (4 votes)

2 thoughts on “Ship Third Engineer Exam Questions Around the World: A Comprehensive Guide to Written, Oral and Practical Assessments”

  1. Thanks for the : Ship Third Engineer Exam Questions Around the World: A Comprehensive Guide to Written, Oral and Practical Assessments

Leave a Reply

Your email address will not be published. Required fields are marked *