IMO Environmental Updates for Shipping: New Emission Control Areas, CII, Fuel Reporting and Biofuels

A practical guide to selected outcomes of MEPC 81, 82, 83 and 84 for shipowners, seafarers, maritime students and technical managers.

Information reviewed: 8 November 2026.

The environmental requirements for international shipping are changing in several connected areas. New emission control areas are being introduced, fuel-consumption reporting is becoming more detailed, and the International Maritime Organization (IMO) is developing ways to measure methane and nitrous oxide emissions from marine engines.

These changes affect more than environmental managers. A chief engineer may need to update fuel-changeover procedures; a master may need to plan an ECA entry; a technical superintendent may need to review engine certificates; and a shipowner may need to improve the quality of fuel-consumption data submitted to the flag State.

This article explains the main developments discussed at four meetings of the IMO Marine Environment Protection Committee (MEPC), from MEPC 81 in March 2024 to MEPC 84 in April and May 2026. It also looks at important implementation dates through 2028.

How to use this guide: The date on which a guideline is adopted is not necessarily the date on which a treaty amendment enters into force or a specific requirement begins to apply. Future entry-into-force dates are subject to the applicable acceptance procedure. Check the final IMO text, the ship’s flag-State instructions, relevant local requirements and the ship’s own certificates before making a compliance decision.

1. Why MEPC decisions matter to ships

The IMO’s Marine Environment Protection Committee deals with issues involving the prevention and control of pollution from ships. It develops amendments and guidance under international instruments, including the International Convention for the Prevention of Pollution from Ships, known as MARPOL.

Many of the developments described here concern MARPOL Annex VI, which addresses air pollution and energy efficiency. Annex VI includes rules on sulphur oxides (SOx), nitrogen oxides (NOx), ship fuel consumption, the Ship Energy Efficiency Management Plan (SEEMP), and operational carbon intensity.

Other developments extend beyond Annex VI. For example, amendments to MARPOL Protocol I clarify reporting procedures when freight containers are lost overboard.

A practical understanding of the following terms helps distinguish the different decisions:

  • Adoption: the IMO committee formally agrees to an amendment or resolution.
  • Entry into force: an amendment becomes effective under the applicable international treaty procedure.
  • Application: a particular requirement begins to apply to a ship, activity or reporting period. This date may be later than entry into force.
  • Guidance or guidelines: technical documents that help with implementation or provide a recommended approach. Their legal effect depends on the instrument, national implementation and the way they are referenced.

The IMO index of MARPOL Annex VI resolutions is a useful starting point for checking current titles, amendments and dates.

2. The new North-East Atlantic Emission Control Area

At MEPC 84, the IMO adopted amendments designating the North-East Atlantic as an Emission Control Area for NOx, SOx and particulate matter. The amendments are contained in resolution MEPC.407(84) and are scheduled to enter into force on 1 September 2027, subject to the treaty acceptance procedure.

The IMO describes the area as covering specified territorial seas and exclusive economic zones, extending up to 200 nautical miles from the relevant baselines of Greenland, Iceland, the Faroe Islands, Ireland, and the mainlands of the United Kingdom, France, Spain and Portugal. This description is an overview: for voyage planning, use the coordinates in the adopted amendment and updated official charts and publications. Source: IMO MEPC 84 summary.

Sulphur requirements

The 0.10% sulphur limit for fuel used in the new area is expected to apply from 1 September 2028, twelve months after the scheduled entry into force of the designation. Ships may use an approved equivalent arrangement where permitted by MARPOL and the relevant authorities; local restrictions on particular systems must also be checked.

For a ship using compliant fuel, preparation should begin before the boundary is reached. The bridge team needs to identify the entry position and time, while the engine department must calculate how long it will take to change over the relevant fuel system. Bunker delivery notes, tank contents, temperatures, compatibility and the ship’s written procedures all form part of the preparation.

Example: A tanker approaches the Atlantic coast of France in late 2028. If it is using a higher-sulphur fuel outside the ECA and relies on compliant fuel inside the area, the crew must complete the changeover in accordance with the ship’s approved procedure before entering. The exact starting time depends on the ship’s tanks, piping and consumption—not on a standard number of hours for every vessel.

NOx Tier III requirements

The NOx requirements are separate from the sulphur requirement. For the North-East Atlantic, the adopted framework uses the following construction-related criteria for the relevant ships:

  1. A building contract placed on or after 1 January 2027; or
  2. If there is no building contract, keel laying or a similar stage of construction on or after 1 July 2027; or
  3. Delivery on or after 1 January 2031.

The scheduled amendment date is 1 September 2027; the one-year delay discussed above concerns the sulphur requirement. Tier III applicability must be assessed against the ship, engine and the detailed provisions of Regulation 13, including applicable exceptions or conversion rules. It does not mean that every older engine must automatically be rebuilt to Tier III simply because it enters the area. See the IMO resolution index and the Finnish Government’s account of MEPC.407(84).

3. Canadian Arctic and Norwegian Sea ECAs

Earlier, MEPC 82 adopted resolution MEPC.392(82), designating the Canadian Arctic and Norwegian Sea as emission control areas. The amendments entered into force on 1 March 2026. The 0.10% sulphur limit is scheduled to apply in both areas from 1 March 2027.

The NOx criteria differ between the two areas. For the Canadian Arctic, the new Tier III provision refers to ships constructed on or after 1 January 2025. For the Norwegian Sea, the regulation defines the relevant construction date through three alternatives:

  • A building contract placed on or after 1 March 2026;
  • In the absence of a building contract, keel laying or a similar construction stage on or after 1 September 2026; or
  • Delivery on or after 1 March 2030.

The criteria and exact area boundaries should be read in the certified text of MEPC.392(82). Applicable NOx requirements are not the same thing as the later sulphur application date.

How do the newer ECAs compare?

Area Designation or amendment entry into force 0.10% sulphur requirement NOx Tier III reference for relevant ships
Mediterranean Sea 1 May 2024 From 1 May 2025 The Mediterranean designation discussed here is for SOx and particulate matter; do not assume a Mediterranean-wide NOx Tier III designation.
Canadian Arctic 1 March 2026 From 1 March 2027 Ships constructed on or after 1 January 2025, subject to Regulation 13.
Norwegian Sea 1 March 2026 From 1 March 2027 Contract, keel-laying or delivery criteria specified above.
North-East Atlantic Scheduled for 1 September 2027 From 1 September 2028 Contract, keel-laying or delivery criteria specified above, subject to the amendment entering into force.

The Baltic Sea, North Sea, North American and United States Caribbean areas already have their own applicable ECA rules. A vessel may pass through more than one control area during a voyage, and each area’s boundaries and NOx applicability need separate attention. Sources: IMO on the Mediterranean ECA; IMO on the Canadian Arctic and Norwegian Sea.

4. More detailed fuel-consumption reporting: IMO DCS

The IMO Data Collection System (DCS) requires ships within its scope, generally ships of 5,000 gross tonnage and above, to collect and report fuel-consumption and related operational data. The data supports IMO analysis and, for applicable ship types, calculation of the annual operational carbon intensity indicator.

At MEPC 81, resolution MEPC.385(81) introduced a package of MARPOL Annex VI amendments, including a more detailed Appendix IX reporting format. The amendments entered into force on 1 August 2025. The IMO also invited early application of the revised reporting format from 1 January 2025; early application was not the same thing as the amendment’s entry into force.

The expanded reporting format includes fuel use by consumer category, such as main engines, auxiliary engines or generators, boilers and other consumers. It also includes fuel use while the ship is not under way, total distance travelled, hours under way and shore power supplied. Laden distance is listed on a voluntary basis in the 2024 amendment. The definitions and reporting period should be checked carefully against the applicable format and the ship’s verified plan. Sources: MEPC.385(81); IMO DCS overview.

For engineering teams, greater detail means that the total bunker quantity alone may no longer be enough for an accurate report. Fuel-flow meters, sounding records, noon reports, machinery logs and shore-power records must be consistent with the ship’s stated collection method. A discrepancy found at the end of the year can be difficult to resolve if the original readings are missing.

Practical example: If a ship consumes fuel while alongside, the company may need to distinguish the relevant auxiliary-engine and boiler consumption according to the reporting format and approved collection method. The same voyage record should also show any electricity supplied from shore when required.

5. DCS access: what changes in 2027?

MEPC 84 also adopted changes concerning access to the IMO fuel-consumption database under MEPC.407(84). These amendments are scheduled to enter into force on 1 September 2027, subject to the acceptance procedure. They should not be described as rules that already apply in November 2026.

The adopted approach provides for access by Parties to a non-anonymised database for analysis, but with an important qualification: a flag administration may notify the IMO that its express approval is required before data for ships flying its flag are included in that database. The amendment also provides for an anonymised public database and limited sharing for analytical or research purposes under confidentiality arrangements. A company can request public access to non-anonymised fuel reports for its own ships under the specified process.

In practical terms, more transparency does not mean that all ship-specific information automatically becomes public. Shipowners should understand which data are reported, who may access them and how flag-State conditions apply. The Finnish Government’s explanation of the adopted amendment describes the flag-consent qualification, while the IMO resolution index lists the scheduled entry-into-force date.

6. CII, SEEMP and EEDI: understanding the differences

Several IMO instruments address efficiency, but they answer different questions.

Term Main purpose Typical practical question
EEDI Design efficiency for applicable new ships. How efficient is the ship’s design under the defined calculation method?
EEXI Technical efficiency of applicable existing ships. Does the existing vessel meet its required technical efficiency level?
CII Annual operational carbon intensity for applicable ships. How did the ship perform during the reporting year?
SEEMP Ship-specific energy-efficiency management plan. What measures, collection methods and improvement processes does the ship use?
IMO DCS Collection and reporting of fuel-consumption and related data. What fuel and operational information must be recorded and verified?

The IMO explains that CII applies to ships of 5,000 GT and above in the specified ship categories, subject to the detailed scope and exceptions. It is not the same measure as a vessel’s total annual CO₂ emissions. A ship’s CII rating considers operational carbon intensity relative to the applicable required value and rating boundaries. Source: IMO EEXI and CII explanation.

At MEPC 83, resolution MEPC.400(83) amended the CII reduction-factor guidelines. The factors below are percentages relative to the applicable 2019 reference line. They are not year-on-year percentages and do not, on their own, represent reductions in the absolute emissions of every ship.

Year Reduction factor relative to the 2019 reference line
2026 11.000%
2027 13.625%
2028 16.250%
2029 18.875%
2030 21.500%

For a simplified illustration, if an applicable reference-line value were 10.0 units, a 13.625% factor would give a required value of approximately 8.64 units before considering the detailed requirements and any applicable corrections. The actual calculation depends on the ship category, capacity and applicable guidelines. Source: MEPC.400(83).

MEPC 83 also adopted MEPC.401(83) on the 2024 SEEMP guidelines and MEPC.403(83) on EEDI survey and certification. Later developments matter: at MEPC 84, MEPC.413(84) further amended the SEEMP guidelines, and MEPC.411(84) adopted 2026 EEDI survey and certification guidelines that supersede the 2022 guidelines as amended, including MEPC.403(83). The IMO index lists the documents and their relationships.

For ship operators, the message is straightforward: use the current consolidated guidance, not an outdated guideline simply because its resolution number appears in an older summary. Keep the ship’s SEEMP, actual data-collection practice and company reporting procedures aligned.

7. Biofuels and CII: revised guidance from 2027

Biofuels can help reduce lifecycle greenhouse-gas emissions, but not every fuel described as “biofuel” is automatically assigned the same value for IMO reporting. Fuel origin, certification and the applicable calculation method matter.

At MEPC 84, the IMO approved MEPC.1/Circ.905/Rev.1, revised interim guidance on biofuels under MARPOL Annex VI Regulations 26, 27 and 28. Member Governments were invited to bring it to stakeholders’ attention for application from 1 January 2027.

One important change concerns blends: the revised guidance uses a mass-weighted average of the applicable component conversion factors, replacing the earlier energy-weighted approach. A blend described by volume cannot automatically be treated as having the same percentage by mass.

The guidance describes conditions under which a certified biofuel may receive a special conversion factor. These include sustainability certification and a specified well-to-wake greenhouse-gas reduction threshold. A proof of sustainability or similar documentation should accompany the relevant bunker delivery information. Biofuels or biogenic blend components that do not meet the criteria are assigned the equivalent fossil-fuel conversion factor under the guidance.

This is an interim accounting method for the specified MARPOL framework. It should not be interpreted as proof that a fuel has zero emissions at the exhaust. Owners should agree the correct documentation and calculation with their flag administration or recognised organisation. Source: IMO revised interim guidance.

Carrying biofuel blends on bunker ships

A separate document, MEPC.1/Circ.917, concerns the carriage of biofuel blends as cargo by conventional bunker ships. This is different from calculating the CII of a ship that consumes biofuel.

The interim guidance addresses blends containing up to 30% biofuel by volume, subject to the conditions in the circular. These include rules for discharging residues and tank washings ashore unless the oil-discharge monitoring equipment is approved for the particular blend. It does not create an unrestricted approval for every biofuel, tanker or port. Source: Singapore MPA circular reproducing the IMO guidance.

8. Measuring methane and nitrous oxide from engines

Carbon dioxide is not the only greenhouse gas relevant to shipping. Methane (CH₄) and nitrous oxide (N₂O) can also contribute to climate change. Methane is particularly relevant to discussions about unburned fuel from gas-fuelled and dual-fuel engines, commonly called methane slip.

MEPC 84 adopted three guidelines on 1 May 2026:

Resolution Subject
MEPC.414(84) Test-bed and onboard measurements of methane and/or nitrous oxide from marine diesel engines.
MEPC.415(84) Engine load monitoring and calculation of emission values.
MEPC.416(84) Continuous emission monitoring systems used to quantify methane and/or nitrous oxide from marine diesel engines.

The distinction between the methods is useful. A test-bed or onboard measurement can help establish an engine’s emissions under defined conditions. Engine load monitoring uses measured operating conditions and the associated methodology to calculate emissions. A continuous emission monitoring system, or CEMS, measures and records emissions during operation in accordance with its applicable arrangement.

The IMO describes these approaches as available for voluntary quantification under the stated guidance, without prejudice to any future mandatory framework. The adoption date is therefore not a universal deadline requiring every existing ship to install methane-monitoring equipment. Sources: IMO resolution list; IMO submission on measurement and verification.

9. Marine engines: multiple operating profiles and replacement

Marine diesel engines may operate under different modes or equipment configurations. The IMO has adopted related amendments to the NOx Technical Code and MARPOL Annex VI, but the dates and instruments are not identical.

Instrument Subject Entry into force
MEPC.398(83) Certification of an engine substantially modified or certified to a different NOx tier. 1 September 2026.
MEPC.397(83) Multiple engine operational profiles and clarification of test cycles in the NOx Technical Code. 1 March 2027.
MEPC.408(84) Related MARPOL Annex VI amendments, including multiple engine operational profiles and test cycles. Scheduled for 1 September 2027.

These dates should be considered alongside the relevant engine technical file, certification, approved operating profiles and flag-State requirements. The IMO Annex VI index identifies each instrument separately.

MEPC 81 also addressed a diesel engine installed to replace a steam system through MEPC.385(81). Under the amended Regulation 13.2.2, such an installation is treated as a replacement engine for the purposes of the regulation. MEPC.386(81) provides guidelines for assessing certain non-identical replacement engines where installation of a Tier III engine is not feasible.

A lower-tier outcome is not automatic. The case must satisfy the applicable regulation and be assessed by the administration under the relevant guidelines. This matters for major conversions: owners should involve the flag State, recognised organisation, designer and engine supplier early in the project. Source: MEPC.386(81).

10. Low-flashpoint fuels and bunker delivery notes

MEPC.385(81) also updated provisions concerning low-flashpoint and gas fuels. For applicable deliveries, the amended rules specify information to be recorded on the bunker delivery note, including density determined using a method suitable for the fuel, the associated temperature and the supplier’s declaration. Sulphur information must be provided in the form allowed by the applicable regulation.

The amendment also clarifies that the specified requirements to fit or designate in-use and onboard sampling points under Regulation 14.10 or 14.11 do not apply to a fuel-oil service system used for a low-flashpoint fuel or gas fuel. This limited clarification should not be read as an exemption from every fuel-quality, safety, documentation or sampling obligation.

For ship staff, the useful practical step is to check that the fuel’s documentation, sampling arrangements and handling procedures match the fuel and the ship’s approved systems. Source: MEPC.385(81).

11. Lifecycle emissions and the IMO Net-Zero Framework

A fuel’s climate impact is not limited to what leaves the funnel. The IMO’s 2024 Guidelines on Life Cycle GHG Intensity of Marine Fuels, adopted through MEPC.391(81), consider emissions across the fuel lifecycle.

  • Well-to-tank: emissions associated with producing and delivering the fuel to the ship.
  • Tank-to-wake: emissions associated with using the fuel on board.
  • Well-to-wake: the combined lifecycle perspective.

This approach helps reveal whether a fuel that reduces exhaust CO₂ also creates significant emissions during production or delivery. It also considers CO₂, methane and nitrous oxide within the relevant methodology. Source: IMO lifecycle-GHG framework.

As of 8 November 2026, the separate IMO Net-Zero Framework remained under discussion after its draft was approved in 2025 and adoption discussions were adjourned. Draft or proposed requirements should not be presented as already adopted and in force. MEPC 84’s work on data, review clauses and technical guidance should therefore be distinguished from the status of that wider proposed framework. Source: IMO Net-Zero Framework FAQ.

12. Reporting containers lost at sea

Freight containers lost overboard can endanger navigation and harm the marine environment. MEPC.384(81) amended MARPOL Protocol I to align the relevant reporting procedure with SOLAS danger-message requirements. The amendment entered into force on 1 January 2026.

The associated SOLAS amendments require the master of a ship involved in the loss of freight containers to report the incident, without delay and as fully as possible, to ships in the vicinity, the nearest coastal State and the flag State. Information such as the position and number of containers lost should be included as required and as available. The flag State reports the incident to the IMO. Source: IMO, shipping rules effective from January 2026.

13. Other guidance from MEPC 81

Several 2024 resolutions support the wider efficiency framework. MEPC.388(81) amended the then-current 2022 SEEMP guidelines; those guidelines were subsequently replaced by the 2024 guidelines under MEPC.395(82). MEPC.389(81) amended guidance for administration verification of fuel-consumption data and operational carbon intensity. MEPC.390(81) amended guidance on shaft or engine power limitation for EEXI compliance and the use of a power reserve.

These documents illustrate why a resolution should be read together with later amendments and replacements. A power-limitation device, for example, is not simply a fuel-saving setting: the ship must follow its approved technical arrangements, recording and procedures for use of any power reserve. Consult the IMO Annex VI index for the current document history.

14. Key dates at a glance

The table separates the different types of date. Future dates are those scheduled or specified in the sources reviewed on 8 November 2026 and may depend on completion of the applicable acceptance procedure.

Date Development What the date means
22 March 2024 MEPC 81 adopts the 2024 LCA guidelines and other measures. Adoption of guidelines and amendments; treaty entry-into-force dates differ.
11 April 2025 MEPC 83 adopts CII reduction-factor and SEEMP-related guideline amendments. Adoption date; the CII factors address specified future years.
1 August 2025 MEPC.385(81) MARPOL Annex VI amendments. Entry into force of the low-flashpoint fuel, replacement-engine and DCS package.
1 January 2026 MEPC.384(81) and related SOLAS amendments. Container-loss reporting amendments enter into force.
1 March 2026 MEPC.392(82). Canadian Arctic and Norwegian Sea ECA amendments enter into force.
1 May 2026 MEPC.414(84), MEPC.415(84) and MEPC.416(84). Adoption of voluntary measurement-related guidelines; not a universal installation deadline.
1 September 2026 MEPC.398(83). NOx Technical Code amendments on certain engine certification cases enter into force.
1 January 2027 MEPC.1/Circ.905/Rev.1. Date from which the IMO invites application of revised interim biofuel guidance.
1 March 2027 MEPC.397(83); Arctic and Norwegian ECAs. Engine-profile Code amendments enter into force; 0.10% sulphur requirement applies in the two ECAs.
1 September 2027 MEPC.407(84) and MEPC.408(84). Scheduled entry into force of the North-East Atlantic designation, DCS-access and related engine-profile amendments.
1 September 2028 North-East Atlantic ECA. Scheduled start of the 0.10% sulphur requirement in that area.

15. What shipowners and crews can do now

A good compliance plan connects legal information with the ship’s actual route, equipment and records.

For the master and bridge team: update passage-planning information, identify future ECA boundaries and communicate entry and exit times to the engine room. Include container-loss reporting in emergency procedures and exercises.

For the chief engineer and second engineer: review fuel storage, changeover time, bunker delivery notes and the applicable sulphur or equivalent arrangement. Check the engine technical file, NOx certification and the effect of any planned modification or replacement. Ensure fuel and shore-power records match the approved DCS method.

For technical and environmental managers: map the requirements against each ship’s flag, size, type, construction dates, routes and equipment. Check whether current SEEMP and reporting procedures reflect later guideline amendments. For biofuel purchases, request the evidence needed to support the relevant reporting treatment.

For training providers: use realistic examples, such as a fuel changeover before an ECA entry or a review of inconsistent generator-fuel records. Explain why the date a rule is adopted can differ from the date a particular obligation applies.

16. Official sources and further reading

The changes described in this article bring voyage planning, engineering, fuel purchasing and environmental reporting closer together. Reliable compliance depends on keeping those teams informed and using the correct version of each IMO instrument for the ship and operation concerned.

4.4/5 - (7 votes)

Leave a Reply

Your email address will not be published. Required fields are marked *