Management-level study guide for commercial-ship chief officers, masters, maritime students and instructors — including Iran
National information checked: 3 November 2026
A chief officer preparing for command and a master preparing for a certificate of competency need more than a good memory for navigation rules. They must be able to assess complex situations, make decisions with incomplete information, lead a team, protect the ship and crew, manage cargo and stability, and explain the reasons for their actions.
Examiners may ask candidates to calculate a ship’s stability after loading, evaluate a passage plan, respond to a grounding, manage a cargo emergency or explain what to do when commercial pressure conflicts with safety. The wording and method of assessment vary around the world, but the management-level competencies share an international foundation.
This article explains that foundation and compares certification and assessment information for Iran, Italy, the United Kingdom, India, the Philippines, the United States, Canada, Australia, New Zealand, South Africa, Singapore and Pakistan. It also provides an extensive original question bank, worked calculations, scenarios and a mock test.
Study and source note: The questions and model answers in this article were created for education. They are not claimed to be actual national past papers or questions known to have appeared in a particular country. Country-labelled examples illustrate management-level competencies; they do not establish what a particular examiner will ask. The official references identify published requirements, syllabuses or sample materials where available. Exam formats, eligibility, ship-size limitations and rules can change. Verify your own route with the issuing administration and an approved training provider.
For real ship operations: Use the current conventions and national requirements, the vessel’s approved stability and loading information, current charts and publications, the safety management system, the master’s orders and professional judgement. The numerical exercises below are simplified teaching examples, not loading or navigation instructions for a real vessel.
Contents
- Chief officer and master: roles and certification
- The international management-level standard: STCW II/2
- Written, oral and practical assessments
- Comparing twelve national systems, including Iran
- How to structure a management-level exam answer
- Written questions and model answers
- Worked stability, cargo and navigation calculations
- Oral questions and model answers
- Scenario-based oral examinations
- Multiple-choice practice test and answers
- Study plan and preparation checklist
- Glossary for management-level deck officers
- Official references and further reading
1. Who are the chief officer and the master?
The master, often called the captain, has overall command of the ship and responsibility for decisions necessary for its safe operation, security and protection of the marine environment. The master coordinates the bridge and engine teams and manages the relationship with the company, port, pilot, authorities and other parties.
The chief officer, also called the chief mate or first officer in many fleets, is normally the deck officer next in rank to the master. The chief officer’s assigned duties commonly include cargo planning and operations, stability monitoring, deck maintenance, supervision of deck personnel and participation in navigation and emergency response. The actual allocation varies by ship, company and flag.
The chief officer must be prepared to assume command if the master becomes incapacitated, in accordance with the applicable law and the ship’s procedures. The master’s overall responsibility does not mean that the chief officer or other officers are relieved of their own assigned duties.
Rank, certificate and authority are not the same thing
| Term | Meaning |
|---|---|
| Chief officer / chief mate | A shipboard management-level deck rank, subject to the certificate and flag requirements for the ship. |
| Master / captain | The person in command of a ship; “Master” is the term commonly used in international instruments and certificates. |
| Certificate of Competency (CoC) | A certificate issued by an administration specifying the holder’s authorised functions and any limitations. |
| STCW II/2 | The international regulation addressing certification of masters and chief mates on seagoing ships of 500 gross tonnage or more, subject to its conditions. |
| Flag-State recognition | An administration’s formal recognition of an eligible foreign certificate where applicable, which may require an endorsement under STCW Regulation I/10 and national rules. |
A title such as “Master Class 1”, “Master Mariner” or “Chief Mate Unlimited” does not mean that all national routes, documents and privileges are identical. Check the actual certificate, its limitations and the ship’s flag-State requirements.
2. What is STCW management level?
The STCW Convention and Code establish international standards for seafarer training, certification and watchkeeping. Deck-officer management-level certification for masters and chief mates on seagoing ships of 500 gross tonnage or more is addressed in Regulation II/2 and the competence standards in Section A-II/2, including Table A-II/2.
The Convention distinguishes certificate categories and requirements, including vessels between 500 and less than 3,000 GT and vessels of 3,000 GT or more. Some administrations also issue other certificates with near-coastal or vessel-specific limitations. The relevant legal provisions, sea service, assessments, medical standards and courses must be checked for each candidate. See the IMO’s STCW overview and the STCW Manila amendments containing Section A-II/2.
Three broad functions at management level
| Function | Examples of management-level knowledge and decisions |
|---|---|
| Navigation | Plan and conduct a voyage; assess weather and route options; organise bridge watches; manage pilotage, traffic and equipment; manoeuvre and handle a ship; maintain navigation safety. |
| Cargo handling and stowage | Plan and monitor safe loading, stowage, securing, care and discharge; assess dangerous and bulk cargo; coordinate with terminals and the crew. |
| Controlling ship operations and care for persons on board | Manage stability, trim and stress; maintain safety and security; organise emergency response, medical care and personnel; prevent pollution; apply relevant legal requirements. |
The table is a simplified learning map, not a complete reproduction of STCW Table A-II/2. The master and chief mate are assessed for their relevant certificate and responsibilities, including the ability to combine technical information with safe command decisions.
Operational-level and management-level questions
| Topic | Operational-level question | Management-level question |
|---|---|---|
| Collision avoidance | What action does the relevant COLREG rule require? | How will you organise bridge resources, assess several targets, supervise the OOW and verify the action remains safe? |
| Stability | What is the free-surface effect? | How will you assess tank operations, free-surface correction, intact and damage stability, and communicate loading limits? |
| Cargo | What is a dangerous-goods label? | How will you verify documentation, stowage, segregation, emergency resources and terminal coordination? |
| Emergencies | What is the fire alarm? | How will you command the response, account for personnel, communicate with authorities and assess whether the ship remains safe? |
| Regulations | What is the ISM Code? | How will you identify and correct a safety-management failure, report it and verify that the corrective action works? |
Management-level questions often begin with “How would you assess, decide, organise and verify?” They may be followed by challenges that change the available information.
3. Written, oral, simulator and practical assessment
| Assessment | Typical task | What it can demonstrate |
|---|---|---|
| Written or digital examination | Solve stability or navigation problems, interpret cargo information, explain regulations or answer multiple-choice questions. | Technical understanding, analysis, calculations, planning and documentation. |
| Oral examination | Explain a command decision, respond to a casualty scenario or justify a proposed cargo plan. | Judgement, priorities, communication, leadership and practical understanding. |
| Simulator assessment | Manage a bridge team during pilotage, traffic, equipment failure or an emergency. | Situational awareness, coordination, ship-handling decisions and use of procedures. |
| Practical or course assessment | Demonstrate a task, complete approved modules, use a loading instrument or perform a scenario. | Applied competence and the ability to perform safely. |
A national authority may use a combination of these methods. In some countries the final examination is oral while course-based written or simulator assessments are separate. Elsewhere, published requirements refer to theoretical and practical assessments. An oral exam should not be assumed to exist in the same format in every route.
An example of management-level reasoning
Examiner: The terminal wants to continue loading, but the loading computer indicates that the permitted still-water bending moment will be exceeded at the next stage. What will you do?
Suggested answer: I would stop or suspend the affected loading operation under the ship–shore procedures, inform the master and terminal and verify the loading computer’s inputs, tank levels, cargo distribution and current condition. I would compare the result with the ship’s approved loading information and applicable limits. With the master and terminal, I would develop and check a revised sequence that keeps the vessel within approved strength, stability, draught and operational limits at every stage. Loading would resume only after the revised plan is agreed and safe conditions are confirmed. I would monitor actual operations and record the change.
The examiner is looking for a safe decision, communication, verification and a workable recovery plan—not simply the definition of bending moment.
4. Chief officer and master examinations in twelve countries
This comparison is an orientation guide, not a legal equivalence decision. A candidate should confirm the current certificate title, tonnage and voyage limits, nationality or residency conditions where relevant, sea service, recognition rules, examination format and exemptions with the competent administration.
| Country | Relevant management-level routes | Published assessment information and important qualification |
|---|---|---|
| Iran | Chief officer / chief mate and master management-level certificates; confirm the exact PMO grade and limits. | Iran’s Ports and Maritime Organization is the maritime administration. A current official public syllabus and exact written/oral format for each unlimited II/2 route could not be independently verified from accessible primary sources for this article. |
| Italy | Primo Ufficiale di coperta; Comandante, with certificate categories and limits. | Decree 72/2025 provides management-level requirements and theoretical-practical competence examinations. The current programme and local authority determine administration. |
| United Kingdom | Chief Mate Unlimited and Master Unlimited; other limited certificates exist. | MCA publishes management-level written/digital assessment and oral syllabuses. Transitional arrangements depend on the candidate’s education route and start date. |
| India | Chief Mate / First Mate (Foreign Going) and Master (Foreign Going). | DGS administers written and oral examinations with course and assessment requirements that vary by grade and route. |
| Philippines | Chief Mate and Master, including tonnage categories. | MARINA documentation identifies deck management-level theoretical examinations and practical assessments; confirm the current circular and route. |
| United States | Chief Mate and Master, unlimited national endorsements, with applicable STCW endorsement. | USCG publishes national examination modules and specimen papers. The exact modules and any other required assessments depend on the endorsement. |
| Canada | Chief Mate and Master / Master Mariner routes, with voyage and tonnage distinctions. | Transport Canada publishes examination and certification procedures; the regulations and guidance include subject examinations and oral assessment for relevant routes. |
| Australia | Chief Mate Unlimited and Master Unlimited; restricted routes also exist. | AMSA requires approved training, qualifying service and an oral examination for the unlimited certificates described in its guidance. |
| New Zealand | Chief Mate and Master, with other limited categories. | Maritime NZ identifies approved management training and a final examination, generally described as oral. |
| South Africa | Chief Mate and Master, with certificate limits. | SAMSA publishes an oral-assessment guideline distinguishing management from operational level; other assessments depend on the route. |
| Singapore | Deck Officer Class 2 and Class 1 / Master Mariner. | MPA lists oral examinations for Classes 1 and 2; a historical circular describes Class 1 simulator-aided and oral assessment. Confirm current requirements. |
| Pakistan | Deck Officer Class II and Class I / Master Mariner. | The published fee schedule lists Class II written and oral or signalling categories and Class I oral examination. It does not by itself define all qualification requirements. |
4.1 Iran: chief officer and master
The Ports and Maritime Organization of the Islamic Republic of Iran (PMO) is Iran’s maritime administration. In Persian, candidates may encounter the terms افسر اول for chief officer or chief mate, فرمانده for master and گواهینامه شایستگی for certificate of competency. The exact title, certificate grade, tonnage, voyage limitations and approved route must be checked with PMO and the relevant authorised training provider.
The international management-level reference for the commercial-ship scope of this guide is STCW II/2 and Section A-II/2. Candidates can study navigation management, cargo, stability, ship construction, emergency command, conventions and leadership against that framework. Training and assessment may include different methods, but this research did not locate an accessible, current official PMO document confirming the detailed written-paper structure, oral-board procedure, language, pass marks, fees or current timetable for each unlimited chief-mate and master route. Therefore, those particulars should be requested directly from PMO or the authorised examination centre rather than inferred from a course advertisement.
Iranian candidates should specifically ask for the current برنامه آزمون, the examination syllabus; eligibility and approved sea-service requirements; required management courses; assessment language; any written, oral, simulator or practical components; and current registration arrangements. A near-coastal or under-500-GT examination should not be assumed to represent an unlimited II/2 examination.
Original management-level practice examples:
- Chief officer, written: Calculate whether a proposed cargo and ballast plan keeps the vessel within the approved draught, stability, shear-force and bending-moment limits.
- Chief officer, oral: The terminal wants to increase the loading rate while the vessel is approaching a structural limit. What will you do?
- Master, oral: During a passage through a busy strait, GNSS positions become inconsistent with radar and visual information. How will you organise the bridge, verify the position and decide whether to continue?
Answer direction: Stop or control the operation when necessary, verify reliable information, coordinate with the team and relevant authorities, use the approved plan and vessel limits, assess alternatives and monitor the outcome. For any local traffic scheme or reporting system, use current official charts, publications and notices.
Sources: IMO-circulated communication identifying PMO as Iran’s maritime administration; ILO country profile identifying Iran’s maritime authority; IMO STCW framework. These sources establish the authority and international context; they do not provide the missing current PMO management-exam format.
4.2 Italy: Primo Ufficiale di coperta and Comandante
Italy distinguishes management-level certificate categories for chief officers and masters, including tonnage limits. Decree No. 72 of 7 May 2025 sets out the applicable requirements. For the chief officer certificate on ships of 3,000 GT or more, it describes prior certification, qualifying sea service, management-level training and a theoretical-practical examination demonstrating A-II/2 competence. Master requirements and other tonnage categories must be checked in the relevant articles.
The Ministry’s maritime labour portal also lists the STCW examination programmes, including Decree No. 76 of 9 May 2025. A theoretical-practical exam should not be assumed to consist of an identical separate written paper and oral paper in every session; the candidate should ask the competent Capitaneria for the current arrangements.
Original practice questions:
- Chief officer: Explain how you would verify a bulk carrier’s loading sequence against approved strength and stability limits.
- Master: A pilot’s proposed manoeuvre differs from the agreed passage plan. What will you do?
Answer direction: Use approved ship-specific information, coordinate and challenge clearly, assess the changed risks and maintain the master’s and bridge team’s responsibilities.
Sources: Italian Decree 72/2025; Italian examination programmes.
4.3 United Kingdom: Chief Mate Unlimited and Master Unlimited
The Maritime and Coastguard Agency publishes an oral syllabus for deck officers and a Chief Mate/Master Unlimited management-level digital assessment syllabus covering navigation, stability and structure. MCA guidance published in 2026 explains a transition to modernised qualifications. From August 2026, candidates progressing from an operational-level academic qualification to Chief Mate Unlimited must follow the modernised top-up syllabus; some colleges introduced it earlier. Other candidates may remain on older written routes or have choices during the specified transition, depending on their qualification and start date.
The management-level assessment and the MCA oral examination are separate elements of the route. Do not assume that the OOW unlimited oral examination’s Part A/Part B structure applies automatically to chief mate or master candidates. Check the current notices, assessment timetable and your individual notice of eligibility.
Original practice questions:
- Written/digital-style: Assess a proposed passage plan, including weather routing, no-go areas, under-keel clearance, contingencies and bridge staffing.
- Master’s oral: How will you respond when a tropical cyclone forecast makes the original route unsafe?
Sources: MCA management-level digital assessment syllabus; MCA modernised qualification guidance; deck oral syllabus.
4.4 India: Chief Mate / First Mate and Master, Foreign Going
India’s Directorate General of Shipping publishes examination information and oral syllabuses for Chief Mate (Foreign Going) and Master (Foreign Going). Written, oral, approved-course and simulator requirements depend on the grade and route. Candidates should check DGS notices and the current examination portal instead of relying on an old fixed list of papers.
DGS Circular 07 of 2026 describes a structured oral-examination preparatory programme. It is ordinarily voluntary and recommendatory, with possible mandatory participation for certain candidates after repeated poor performance. The programme prepares candidates for the statutory examination; it is not itself the CoC examination.
Original practice questions:
- Chief mate, written: Calculate a loading plan’s final GM, free-surface correction and trim using the supplied data.
- Master, oral: How would you manage a serious fire while the ship is in a traffic separation scheme?
Sources: DGS examination and certification; DGS Circular 07/2026.
4.5 Philippines: Chief Mate and Master
MARINA publishes management-level certification requirements for chief mates and masters, with distinctions according to vessel tonnage. Its certification documentation includes theoretical examination and practical assessment for the relevant deck management level. Candidates should verify the current approved circular, required training and assessment arrangements with MARINA and the accredited provider.
A practical assessment may involve a demonstration or scenario; it should not be assumed to be identical to another country’s final oral board.
Original practice questions:
- Theory: Explain how free-surface effect can influence a proposed cargo and ballast plan.
- Practical/scenario: Organise the bridge team and response after loss of steering in coastal traffic.
Source: MARINA approved STCW circulars, including SC-2021-03.
4.6 United States: Chief Mate and Master, unlimited
The US Coast Guard National Maritime Center publishes national examination modules and sample examinations for Master/Chief Mate Unlimited Tonnage. The published module group includes rules of the road, deck general knowledge, deck safety, stability problems, navigation and chart-plotting subjects. Which modules apply depends on the credential and route.
The US national endorsement and any required STCW endorsement are separate components of credentialing. Do not assume that every US candidate follows the same oral examination used in another country. The USCG’s Q102 Deck General—Part II is one example of an official specimen paper for Master/Chief Mate unlimited candidates.
Original practice questions:
- Written: A cargo sequence creates a high bending moment before the final condition. Explain how you would detect and correct the problem.
- Scenario: How will you organise bridge resources and communications before entering a congested port?
Sources: USCG deck examination listing; USCG Q102 Master/Chief Mate sample examination.
4.7 Canada: Chief Mate and Master / Master Mariner
Canada’s Marine Personnel Regulations and Transport Canada publications identify different management-level certificates and limitations. Relevant examinations can include navigation, meteorology, ship management, construction and stability, cargo, simulator assessment and oral general seamanship, depending on the certificate and route.
Candidates should distinguish the Chief Mate, Master, Master Mariner and near-coastal or tonnage-limited routes and check the current regulations and Transport Canada examination publication.
Original practice questions:
- Written: Explain the effects on stability and structural loading when a hold is flooded.
- Oral: A crew member is seriously injured during mooring. How will you manage medical care, ship safety and reporting?
Sources: Canadian Marine Personnel Regulations; Transport Canada examination and certification publication.
4.8 Australia: Chief Mate Unlimited and Master Unlimited
AMSA’s published requirements for Chief Mate Unlimited and Master Unlimited include approved training, qualifying sea service, medical and other required evidence, and an AMSA oral examination. Course assessments may include additional written, practical or simulator elements. Other certificates, including under-3,000-GT routes, have different conditions.
Original practice questions:
- Chief mate: How would you manage an unsafe enclosed-space entry request during port operations?
- Master: A cyclone warning changes during the voyage. Explain your decision-making process and communication plan.
Sources: AMSA Chief Mate Unlimited; AMSA Master Unlimited.
4.9 New Zealand: Chief Mate and Master
Maritime New Zealand identifies approved management-level training for chief mate and master certificates. Its Chief Mate guidance describes a final examination conducted by an approved examiner and identifies the final examination as oral in that guidance. Maritime NZ’s general training guidance also describes the final examination as oral; individual certificate conditions and any other assessments should be checked.
Original practice questions:
- Chief mate: Explain the information you would check before authorising a heavy lift on deck.
- Master: How would you manage a bridge-team disagreement during restricted-visibility pilotage?
Sources: Maritime NZ Chief Mate guidance; Maritime NZ approved management-level training.
4.10 South Africa: Chief Mate and Master
SAMSA publishes a deck officer oral-assessment syllabus guideline that distinguishes the management level for master and chief mate from the operational level for OOW. The available guideline is older, so candidates should confirm its current status and the academic, practical and service requirements for their chosen certificate.
Original practice questions:
- Chief mate: Describe how you would supervise loading when ballast pumps cannot keep up with the terminal’s planned rate.
- Master: The vessel has lost propulsion near a lee shore. How will you assess the situation and request assistance?
Source: SAMSA deck officer oral-assessment guideline.
4.11 Singapore: Deck Officer Class 2 and Class 1
Singapore’s MPA uses numbered deck-officer certificates. Class 1 is identified as Master Mariner, while Class 2 is another senior deck-officer certificate; candidates should check the precise capacity and limits for their certificate. MPA’s published charges identify oral examinations for Classes 1 and 2. A 2004 MPA circular described an oral and simulator-aided assessment for Class 1. Because this circular is historical, the candidate should verify the present assessment route with MPA and the approved provider.
Original practice questions:
- Chief officer-level: What checks are necessary before accepting a revised dangerous-goods stowage plan?
- Master-level: How will you coordinate pilot, tugs and bridge team during a confined-water manoeuvre?
Sources: MPA deck examination categories; historical MPA Class 1 oral and simulator circular.
4.12 Pakistan: Deck Officer Class II and Class I
Pakistan’s Mercantile Marine Department fee schedule identifies Class II deck-officer written and oral or signalling examination categories and a Class I Master oral examination. The fee schedule is a useful entry point but does not establish the complete eligibility, prior qualifications, courses or all assessment requirements. Obtain the current syllabus and notice of eligibility from the department.
Original practice questions:
- Class II-style study: Explain the effect of slack ballast tanks on the vessel’s effective GM.
- Master-level oral: What would you do if commercial instructions conflicted with your assessment of safe navigation?
Source: Pakistan Mercantile Marine Department examination categories.
5. How to answer a management-level exam question
A useful structure is:
- Identify the immediate danger: Is life, the ship, cargo or environment at risk?
- Stabilise the situation: Stop, isolate, reduce or control the operation where appropriate.
- Gather and verify information: Use the correct instruments, records, approved plans and competent people.
- Communicate and assign responsibilities: Inform the master, chief officer, engine room, company, terminal or authorities as the situation requires.
- Make and explain the decision: Compare the available options, risks and applicable requirements.
- Implement and monitor: Brief the team, use check-backs and verify that the action is effective.
- Report, record and learn: Complete the required notifications and preserve evidence; investigate and correct underlying causes.
This sequence is a study aid, not a rigid emergency checklist. Some steps occur at the same time. A master must be ready to act immediately when necessary and to explain the decision afterwards.
A good answer also distinguishes what is known, what is assumed and what must be checked. For example, a loading computer result is only as reliable as its input data and approved limits.
6. Written examination questions and model answers
The following are original questions. A real examination may require a more detailed calculation, a diagram, a reference to an applicable rule or use of a supplied ship’s approved data.
Written question 1 — Chief officer: Explain how to prepare a safe cargo plan.
Model answer: Obtain the cargo declaration, weights, dimensions, properties, special requirements and intended ports of loading and discharge. Confirm the ship’s available space, tank and hold condition, cargo compatibility and the permitted deck, hatch-cover and tank-top loads. Prepare a loading and discharge sequence that complies with draught, trim, intact and applicable damage stability, shear-force and bending-moment limits at every intermediate stage. Plan ballast, securing, ventilation and emergency arrangements. The master approves the plan; coordinate it with the terminal and update it whenever actual conditions differ.
Written question 2 — Chief officer: Explain still-water shear force and bending moment.
Model answer: Differences between the distribution of ship weight and buoyancy create longitudinal forces and moments along the hull. Still-water shear force and bending moment describe important components of the loading condition before wave-induced effects are considered in the applicable design and operational framework. Excessive values can overstress the structure. Use the vessel’s approved loading manual or approved loading instrument, including the correct cargo, ballast, fuel and consumables. Check each loading stage, not only departure and arrival.
Written question 3 — Chief officer: Explain free-surface effect and its management.
Model answer: When a ship heels, liquid in a partially filled tank can move, causing a virtual rise in the ship’s centre of gravity and reducing effective initial stability. The correction depends on the tank geometry, filling condition and liquid, as represented in the ship’s approved information. Minimise or manage unnecessary slack tanks when operationally practicable, and assess all intended ballast and fuel transfers using approved stability data. A favourable uncorrected GM does not establish that the corrected condition meets every criterion.
Written question 4 — Chief officer: Describe the precautions before lifting a heavy item.
Model answer: Establish the item’s verified weight, centre of gravity, dimensions and lifting points; check crane, rigging and deck limits, test certification and the approved lift plan. Assess the suspended load’s effect on stability, list, hull loading and freeboard at each critical stage, including the highest point of suspension. Consider weather, wind, ship movement, communications, exclusion zones and emergency arrangements. The master and responsible officers should approve the plan; stop if actual conditions exceed its limits.
Written question 5 — Chief officer: Explain how cargo segregation is controlled for packaged dangerous goods.
Model answer: Verify the dangerous-goods declaration, identification, class, subsidiary risks, packing group and other applicable information. Use the current IMDG Code, the ship’s dangerous-goods document of compliance where applicable, approved plans and company procedures to determine permitted stowage, segregation and emergency arrangements. Confirm compatibility with other cargo and coordinate with the terminal. If the declaration and container markings disagree, suspend the affected operation until the discrepancy is resolved.
Written question 6 — Chief officer: Explain why some solid bulk cargoes can liquefy or undergo dynamic separation.
Model answer: Certain cargoes are sensitive to moisture and movement. Under the relevant conditions, vibration and ship motion can cause loss of shear strength or dynamic separation, leading to cargo shift and loss of stability. The current IMSBC Code identifies cargo groups and schedules and specifies documentation, sampling, testing and carriage requirements, including transportable moisture limits where applicable. Rain, cargo condition, the ship’s design and valid shipper information must be assessed. Follow the current Code, the approved plan and the master’s instructions.
Written question 7 — Chief officer: What are the main steps in a ship–shore bulk-cargo loading agreement?
Model answer: Exchange information on the ship’s loading plan, cargo, hold capacities, structural and stability limits, ballast capabilities, loading rates, sequence and emergency-stop arrangements. Agree communications, trimming, monitoring, changes and the conditions for stopping work. Record the agreed plan and verify actual quantities throughout. The applicable ship–shore procedures and the IMO’s BLU Code guidance should be used alongside the vessel’s approved information.
Written question 8 — Master: Explain how to assess a berth-to-berth passage plan.
Model answer: Confirm that appraisal, planning, execution and monitoring have been completed. Review charts and publications, routeing measures, traffic, weather, tides, under-keel clearance, no-go areas, reporting, pilotage, wheel-over positions, bridge staffing and contingencies. Check the vessel’s draught, manoeuvring characteristics, equipment status and environmental conditions. Approve the plan only when it is suitable, brief the bridge team and monitor or amend it when conditions change. The IMO’s voyage planning guidelines describe the four stages.
Written question 9 — Master: Explain how to manage restricted visibility.
Model answer: Assess the conditions and ensure safe speed, a proper lookout and sufficient bridge resources. On a power-driven vessel, have engines ready for immediate manoeuvre when Rule 19 applies. Review radar and other equipment, sound the required signals, call additional personnel as needed and assess traffic using all available means. Apply the COLREGs relevant to whether vessels are in sight or not in sight. Take action in ample time when required, monitor its effect and be ready to change the plan if the situation worsens.
Written question 10 — Master: Explain the purpose of a master–pilot information exchange.
Model answer: Before and during pilotage, the master and pilot exchange the intended route, berth, draught, under-keel clearance, manoeuvring characteristics, equipment limitations, tug arrangements, communications, traffic and contingencies. They agree roles and expectations and update the plan if conditions change. The pilot provides local expertise, but the master and bridge team retain their responsibilities for the vessel’s safety. Bridge officers should monitor progress and promptly challenge unclear or unsafe instructions.
Written question 11 — Master: Explain the master’s overriding authority under the ISM system.
Model answer: The safety management system must state the master’s overriding authority and responsibility to make decisions concerning safety and pollution prevention and to request company assistance as necessary, as reflected in ISM Code section 5.2. The master should assess the evidence, apply the relevant rules and procedures, communicate the decision and record the reasons. A commercial schedule or charter instruction does not remove the master’s safety responsibilities. Different legal instruments may add specific duties, including SOLAS provisions on safe navigation and security.
Written question 12 — Master: Describe command priorities following a collision.
Model answer: Protect life and raise the alarm; assess the ship’s position, movement and immediate collision or grounding risk. Organise damage assessment, watertight integrity, flooding control, medical assistance and pollution prevention. Communicate with the other vessel, rescue coordination centre, coastal or port authorities, company and flag State as required. Consider whether to remain in position, seek assistance or request a place of refuge. Preserve navigation and communication records and investigate under the applicable procedures. Actions depend on the damage, sea room and immediate danger.
Written question 13 — Master: What are the main considerations after grounding?
Model answer: Establish the position and time, protect people, assess traffic and environmental conditions, check soundings and vessel movement and organise tank and compartment checks when safe. Assess hull damage, flooding, stability, stresses, tide and pollution risk; inform the company and relevant authorities. Do not attempt an unplanned refloating operation: assess the consequences and obtain assistance and competent advice as appropriate. Prepare a controlled salvage or refloating plan before acting, unless immediate circumstances require another safety decision.
Written question 14 — Master: Explain the relationship between SOLAS, MARPOL, STCW and the ISM Code.
Model answer: SOLAS addresses many aspects of ship safety, including construction, fire protection, life-saving appliances and safety of navigation. MARPOL addresses pollution from ships through its technical annexes. STCW sets training, certification and watchkeeping standards. The ISM Code provides a safety-management framework that requires a company and shipboard safety management system. Their application depends on the ship, operation, flag and relevant provisions; one instrument does not replace the others.
Written question 15 — Master: Explain how to manage an unsafe instruction from a commercial party.
Model answer: Assess the proposed instruction against the actual risk, the vessel’s condition, applicable requirements and the safety management system. Explain the concern and any restrictions to the company or charterer, and consult relevant specialists or authorities as needed. Use the master’s authority to make decisions necessary for safety and pollution prevention, propose a safe alternative where possible, brief the crew and record the assessment and communications.
Written question 16 — Master: Describe an effective response to an enclosed-space casualty.
Model answer: Sound the alarm and activate the ship’s rescue and medical plan. Prevent unplanned entry, establish communications and assemble a trained rescue team with the correct breathing apparatus, retrieval equipment and support. Coordinate ventilation and atmospheric assessment as appropriate without delaying or improvising an unsafe entry. Obtain medical advice and external assistance when required. Provide first aid when the casualty is safely recovered, account for rescuers and preserve evidence. See IMO Resolution MSC.581(110).
Written question 17 — Master and chief officer: Explain how to prepare for port State control.
Model answer: Maintain the ship continuously in compliance with applicable requirements rather than preparing only for an inspection. Check the validity and condition of certificates, crew documents, safety equipment, navigation information, pollution-prevention arrangements and required records. Ensure that crew can demonstrate their assigned duties, report defects and take corrective action. During an inspection, cooperate, provide accurate information, correct deficiencies and follow the authority’s instructions and any applicable appeal process.
Written question 18 — Master and chief officer: Explain how to investigate a near miss.
Model answer: Secure the situation and protect people and evidence. Collect factual information from those involved, relevant records, equipment and conditions. Identify immediate and underlying causes, including procedures, training, communication, workload and equipment. Agree corrective and preventive actions, assign responsibilities and deadlines, and verify effectiveness. A fair investigation encourages reporting and does not assume that blaming one person will prevent recurrence.
7. Worked stability, cargo and navigation calculations
Important: These are simplified exercises. Real loading requires the vessel’s approved hydrostatic tables, stability booklet, loading manual, applicable damage-stability information and approved loading instrument. A single calculation never proves that a ship is safe or compliant in every respect.
Calculation 1: Cargo available from deadweight
Question: At the permitted displacement for a particular condition, a ship has 25,000 tonnes of deadweight available. Planned bunkers are 1,200 t, freshwater 300 t, stores 200 t and other consumables and constants 300 t. Estimate the remaining cargo weight, assuming no other items.
Non-cargo deadweight = 1,200 + 300 + 200 + 300 = 2,000 t.
Available cargo weight = 25,000 − 2,000 = 23,000 t.
This is an upper estimate under the stated assumptions. Space, draught, load line, structural, stability and cargo-specific limits can reduce the permitted cargo.
Calculation 2: Final KG and corrected GM after loading
Question: A ship initially displaces 20,000 t with KG = 8.00 m. It loads 1,000 t of cargo with its centre of gravity at KG = 12.00 m. For this exercise only, assume the final KM is 9.00 m and the total free-surface moment is 2,100 t·m. Find final KG and corrected GM.
Initial vertical moment = 20,000 × 8.00 = 160,000 t·m.
Cargo vertical moment = 1,000 × 12.00 = 12,000 t·m.
Final displacement = 21,000 t.
Final KG = (160,000 + 12,000) ÷ 21,000 = 8.190 m.
Uncorrected GM = KM − KG = 9.00 − 8.190 = 0.810 m.
Free-surface correction = 2,100 ÷ 21,000 = 0.100 m.
Corrected GM = 0.810 − 0.100 = approximately 0.710 m.
Real KM changes with the vessel’s hydrostatic condition. Even if this GM exceeds a stated minimum, other stability, strength and operating criteria must also be checked.
Calculation 3: Moving cargo vertically
Question: A 100 t item is moved 6 m upwards on a ship displacing 20,000 t. Estimate the rise of G, assuming no other changes.
Rise of G = weight × vertical distance ÷ displacement
= 100 × 6 ÷ 20,000 = 0.030 m.
If KM is unchanged, GM decreases by approximately 0.030 m. This simple calculation does not cover suspended-load effects during the lift.
Calculation 4: Suspended load and virtual rise of G
Question: A 60 t item originally has its centre of gravity 3 m above the keel. It is lifted on board and suspended from a crane head 25 m above the keel. The ship displaces 20,000 t. Estimate the virtual rise of G due to suspension, using the simplified assumption that the load is already part of ship displacement.
Vertical distance = 25 − 3 = 22 m.
Virtual rise of G = 60 × 22 ÷ 20,000 = 0.066 m.
The ship’s approved lifting procedure must also consider actual geometry, transverse movement, list, crane loads, wind, dynamic forces, free surface and stability at every stage. A shore-to-ship lift changes displacement as the weight is transferred; this simplified onboard example does not model that transition.
Calculation 5: Approximate trim from a longitudinal weight shift
Question: A 100 t weight is moved 20 m aft. The vessel’s moment to change trim by 1 cm, MCTC, is assumed to be 200 t·m/cm. Estimate the change in trim.
Trimming moment = 100 × 20 = 2,000 t·m.
Change in trim = 2,000 ÷ 200 = 10 cm by the stern.
This is an approximate change in overall trim. The changes in forward and aft draught separately depend on the longitudinal centre of flotation and the vessel’s hydrostatics.
Calculation 6: Under-keel clearance
Question: Charted depth is 11.0 m, tide above the same chart datum is 1.8 m, deepest draught is 10.5 m and a squat allowance is 0.8 m. Calculate the remaining clearance before other allowances.
Remaining clearance = 11.0 + 1.8 − 10.5 − 0.8 = 1.5 m.
This does not include wave response, heel, water-density effects, chart or position uncertainty or the required company/port margin. It is not by itself approval to enter the channel.
Calculation 7: Cargo volume and mass
Question: A liquid cargo volume at a specified reference condition is 5,000 m³ and its density at that same reference condition is 0.850 t/m³. Estimate the mass.
Mass = volume × density = 5,000 × 0.850 = 4,250 t.
In real cargo measurement, temperature, volume correction, sampling, tank calibration, water and contractual or regulatory procedures matter. Do not combine a density and volume referenced to different temperatures without the required corrections.
Calculation 8: A container-stack weight check
Question: Four containers each have a verified gross mass of 30 t. The approved maximum stack weight at the proposed location is 100 t. Compare the proposed stack with that limit.
Proposed total = 4 × 30 = 120 t.
Excess over stated stack limit = 120 − 100 = 20 t.
The proposed stack exceeds this one limit and must be replanned. A compliant stack weight alone would not prove that deck loads, securing, stability and all other requirements are met.
Calculation 9: Time, speed and arrival
Question: A vessel has 180 nautical miles remaining and expects an average speed over ground of 12 knots. If it starts at 06:00 UTC, estimate the arrival time at the end of the stated distance.
Time = distance ÷ speed = 180 ÷ 12 = 15 hours.
ETA = 06:00 + 15 hours = 21:00 UTC on the same day.
The estimate assumes constant average speed over ground and no waiting, manoeuvring or weather delay.
Calculation 10: Simple transverse weight movement
Question: A 50 t weight is moved 20 m transversely on a ship displacing 20,000 t. Estimate the transverse movement of the ship’s centre of gravity. If the effective GM is 1.0 m, estimate the small-angle heel under simplified conditions.
GG₁ = 50 × 20 ÷ 20,000 = 0.050 m.
Using the simplified relation tan(heel) = GG₁ ÷ GM = 0.050 ÷ 1.0 = 0.05.
Heel ≈ arctan(0.05) = 2.9°.
This is a teaching approximation. Actual operations require the approved stability data, tank free-surface effects, lifting geometry, external forces and all applicable limits.
8. Oral examination question bank: 100 questions and model answers
The first 50 questions emphasise chief officer responsibilities; the next 50 emphasise master and command responsibilities. Both ranks need broad knowledge of all management functions. These are original educational questions, not claimed official past papers.
A. Chief officer: cargo planning and ship–shore operations
1. What information do you need before preparing a cargo plan?
Obtain verified cargo weights and characteristics, ports and sequence, special handling and segregation requirements, available spaces, tank and hold conditions, stability and strength data, draught restrictions and ballast capability. Consult the master, terminal and relevant shipboard officers. Check the ship’s approved loading information and applicable cargo codes before proposing a plan.
2. Why must every intermediate loading stage be checked?
A ship can meet final draught and stability requirements yet exceed shear-force, bending-moment, tank-top or other limits during loading. Check the planned sequence, ballast, rates and holds at each significant stage. Monitor actual loading and recalculate if quantities or rates differ from the plan.
3. What would you do if the terminal loads faster than the ship can safely ballast?
Inform the master and terminal and reduce or stop loading in accordance with the agreed communication and emergency-stop arrangements. Verify the actual cargo and ballast condition and assess stability, draught, trim and strength. Agree a safe revised rate or sequence before resuming; do not assume the pumps can recover a dangerous condition later.
4. What is the purpose of a loading computer?
An approved loading instrument helps calculate ship-specific conditions such as stability, draught, trim, shear force and bending moment, according to its approved functions. It relies on correct inputs, calibration and approved data. The chief officer must understand its limitations, verify actual tank and cargo quantities and follow the ship’s loading manual.
5. What is the difference between shear force and bending moment?
They describe different longitudinal structural effects produced by the distribution of weight and buoyancy along the ship. Excessive shear force or bending moment can damage the hull. Use the vessel’s approved limits for the relevant condition and check the entire loading sequence, including ballast transfers.
6. What would you do if a structural limit is exceeded during cargo operations?
Stop or suspend the affected operation, inform the master and terminal, verify the measurements and assess the actual condition. Use the approved loading information and, if necessary, obtain technical advice. Prepare and agree a safe recovery sequence that remains within all relevant limits before resuming.
7. What is a tank-top loading limit?
It is a permissible load on the relevant tank-top area, specified in the vessel’s approved information. A cargo can be within the ship’s total deadweight while exceeding local structural capacity. Check cargo distribution, contact area, dunnage and the approved loading arrangement rather than dividing weight by hold area without considering local loads.
8. Why is the verified gross mass of a container important?
Reliable gross-mass information supports safe stowage, stack loading, securing and stability calculations. The shipper and other parties have responsibilities under the applicable SOLAS requirements. A verified mass should be checked against the plan, but it does not replace the full stowage and securing assessment.
9. How do you check dangerous-goods segregation?
Use the current IMDG Code, dangerous-goods declaration, ship’s documents and approved procedures to identify the goods and applicable segregation and stowage rules. Check both primary and subsidiary risks where relevant. Resolve missing or inconsistent information with the master and terminal before accepting the affected cargo.
10. What would you do if the cargo declaration and container placard disagree?
Suspend or do not accept the affected operation, inform the master and terminal and request verified documentation. Identify the correct substance, class and stowage requirements using the applicable code. Do not guess based on the label, and update the cargo plan and emergency information only after the discrepancy is resolved.
11. What is the purpose of the cargo securing manual?
It provides approved ship-specific arrangements for securing cargo as applicable, including equipment, methods and design limitations. The chief officer should ensure that the planned stowage and securing conform to the manual and that equipment is sound and correctly used. Changes in weather and the actual cargo condition require continued monitoring.
12. What are the main risks of some solid bulk cargoes?
Depending on the cargo, risks include liquefaction or dynamic separation, shifting, structural overloading, oxygen depletion, toxic or flammable gases, self-heating and incompatible materials. Use the current IMSBC Code schedule and verified shipper information. Do not treat all bulk cargoes as having the same properties.
13. What is transportable moisture limit?
The transportable moisture limit, or TML, is a cargo-specific limit used for relevant solid bulk cargoes under the IMSBC Code. The applicable requirements for sampling, testing, documentation and specially constructed ships must be followed. An officer should not infer cargo safety from appearance alone or use an outdated certificate without checking its validity and the cargo condition.
14. What precautions apply to ventilation of a hazardous cargo?
Follow the cargo’s current code schedule, shipper information, ship’s approved procedures and the master’s instructions. Consider gas generation, oxygen depletion, flammability, weather, venting and crew exposure. Ventilation needs differ by cargo; a universal instruction to ventilate or to keep every hold closed can be unsafe.
15. What should be checked before tanker cargo operations?
Confirm the cargo plan, ship–shore checklist, line-up, tank capacity, rates, pressure limits, communications, emergency shutdown, inert-gas arrangements where applicable, pollution controls and crew qualifications. Review cargo-specific hazards and terminal procedures. The master and chief officer must ensure that the operation remains within the vessel’s approved limits.
16. Why are cargo and ballast operations closely connected?
Both change displacement, draught, trim, stability and hull loading. A plan that considers cargo without ballast rates or tank free-surface effects may become unsafe. Coordinate the sequences and continuously compare actual conditions with the approved loading plan.
17. What is the ship–shore safety checklist?
It is a structured check of agreed safety conditions and responsibilities between the ship and terminal for the operation, as applicable to the vessel and cargo. It helps confirm communication, equipment, emergency arrangements and precautions. Both parties must actually verify and maintain the conditions; a completed form alone does not make the operation safe.
18. What should you do if a cargo leak occurs on deck?
Raise the alarm, protect people and assess the substance and immediate hazards. Stop or isolate the operation if safe and authorised, inform the master and terminal, and follow the ship’s cargo, fire and pollution emergency plans. Use correct protective equipment and control ignition sources. Do not approach an unknown toxic or flammable release without suitable protection.
19. What should the chief officer check before closing cargo holds for sea?
Confirm cargo condition and securing, removal of personnel and equipment, required inspections, correct closure of hatches and openings, and the relevant ventilation or monitoring arrangements. Check that ballast, stability, draught and strength match the final plan. Report outstanding defects to the master and record the checks under the ship’s procedures.
20. How do you manage cargo operations in deteriorating weather?
Monitor the forecast and actual conditions, vessel movement, moorings, cargo properties and equipment limits. Discuss changes with the master and terminal and slow or stop work when required by the plan or safety assessment. Secure cargo and openings as needed. Resume only when conditions and the revised plan are safe.
B. Chief officer: stability, trim and hull integrity
21. What is GM and why does it matter?
GM is the distance between the centre of gravity G and the transverse metacentre M for a stated condition. It is an indicator of initial transverse stability, but it does not describe the complete righting-lever curve, damage stability, structural strength or every applicable criterion. Use the vessel’s approved stability information.
22. What is the difference between uncorrected and corrected GM?
Uncorrected GM is calculated from KM minus KG before the relevant free-surface correction. Corrected GM accounts for the free-surface effect as specified in the approved method. The chief officer must use the correct displacement and tank conditions and check the complete stability criteria.
23. What is an angle of loll?
It is a possible equilibrium angle when a vessel has negative initial stability in the upright condition. It is different from a list caused by an off-centre weight. Do not make an improvised ballast transfer to correct an unexplained angle: inform the master and assess the actual stability using approved information and competent advice before taking action.
24. What is the difference between list and heel?
A list is commonly a persistent inclination caused by an off-centre weight or another condition; heel is often a temporary inclination caused by an external force such as wind or turning. The terms can be used differently in practice. Identify the cause and the ship’s actual stability rather than relying only on terminology.
25. Why can slack tanks be dangerous?
Liquid can move as the vessel heels, producing a free-surface effect and reducing effective initial stability. The magnitude depends on each tank and liquid condition. Review the approved free-surface data and ballast plan; do not assume that simply filling or emptying a tank is safe without assessing the entire operation.
26. What is the effect of a suspended weight?
While a weight is suspended, its effect on stability is generally assessed as acting at the point of suspension for the relevant simplified calculation. This can raise the vessel’s effective centre of gravity and increase list as the crane moves. Use the approved lifting plan and consider whether the weight has already been added to the ship’s displacement.
27. What is reserve buoyancy?
It is the volume of enclosed watertight space above the waterline that can contribute additional buoyancy as the vessel sinks or heels, subject to the actual condition and integrity of openings. Reduced freeboard, open hatches or damage can diminish the margin. Reserve buoyancy is one reason load-line and watertight-integrity requirements matter.
28. What is the difference between intact and damage stability?
Intact stability concerns the vessel’s stability without the assumed damage condition. Damage stability assesses the vessel’s condition after specified flooding or damage, using the applicable approved information and criteria. Meeting an intact GM requirement alone does not establish that a damaged condition is safe.
29. What is MCTC?
Moment to change trim by one centimetre is a hydrostatic value used to estimate the trim change produced by a known trimming moment for a particular displacement and condition. Use the correct vessel-specific data. To estimate individual changes at bow and stern, the longitudinal centre of flotation and hydrostatic method are also needed.
30. What would you check if the actual draught differs from the loading computer’s value?
Verify draught readings, trim, water density, tide where relevant, tank soundings, cargo quantities, constants, loading-computer inputs and sensor or reading errors. Inform the master and reassess the condition. Do not alter figures simply to make the calculation match the observation.
31. Why are hatch covers important to stability and safety?
They protect cargo and help maintain the vessel’s weather-tight integrity. Damaged seals, cleats, drainage or operating gear can allow water ingress, cargo damage and loss of buoyancy or stability. Inspect and maintain them as required and report defects before departure.
32. What is under-keel clearance management?
It is the assessment and control of clearance along a route, accounting for charted depth, compatible tide data, draught, squat, wave response, heel, density, uncertainties and required margins. Use the vessel’s and port’s approved criteria and current information. A single static depth subtraction may be inadequate.
C. Chief officer: deck safety, environment and leadership
33. How would you organise safe mooring operations?
Use the approved mooring plan and risk assessment, brief the crew, identify roles and communications, check equipment and line condition, and maintain awareness of line loads and potential snap-back. Coordinate with the bridge and terminal. Stop the operation when conditions or instructions are unsafe; markings do not make any unmarked area automatically safe.
34. What precautions are required for enclosed-space entry?
Use the ship’s permit and risk assessment, isolate hazards, ventilate, test the atmosphere with suitable calibrated equipment, arrange an attendant, communications, rescue capability and appropriate PPE. Conditions must be monitored as required and the space evacuated if it becomes unsafe. No one should enter simply to rescue a collapsed person without the controlled rescue plan.
35. What is lockout and tagout?
It is a controlled process to isolate hazardous energy and prevent unexpected operation during work. Depending on the task, sources include electrical, mechanical, hydraulic, pneumatic, pressure, gravity and automatic-start energy. Isolation must be verified and the permit and handover arrangements followed.
36. How do you decide whether deck work can continue in rough weather?
Assess ship movement, wind, waves, visibility, deck condition, the task’s urgency and available controls. Consult the master and postpone nonessential work when risk cannot be adequately controlled. Brief the team, maintain communications and stop if conditions change.
37. What information should a chief officer provide during a fire emergency?
Report the location, people involved, cargo or chemicals nearby, access routes, ventilation and possible isolation points. Account for the assigned team and coordinate with the master under the emergency plan. Avoid sending personnel into a dangerous atmosphere without the correct training, equipment and command arrangements.
38. How do you supervise inspection of life-saving appliances?
Use the ship’s maintenance schedule, manufacturer instructions and applicable requirements. Assign trained personnel, check the actual condition and access, report defects and ensure records reflect work performed. Do not assume that a completed checklist proves equipment will function if physical checks or tests were omitted.
39. What are your responsibilities during an oil spill?
Stop or control the source if safe, raise the alarm and inform the master. Implement the shipboard oil pollution emergency plan and assigned containment measures, protect personnel and coordinate with the terminal or authorities. Record and report as required. Never conceal a spill or make a false entry.
40. What is a ballast water management plan?
It is a ship-specific plan for managing ballast water and sediments under applicable requirements. The chief officer should coordinate treatment or exchange, records and reporting while maintaining the vessel’s stability and structural limits. Check the vessel’s approved equipment and the relevant flag, coastal-State and port requirements.
41. What is the relationship between maintenance and the ISM Code?
The company’s safety management system must include procedures to ensure that the ship and equipment are maintained in accordance with relevant rules and company requirements. A planned maintenance system is a common way to implement this. The chief officer should ensure deck defects, inspections and corrective actions are accurately reported and followed up.
42. How should a near miss be managed?
Make the situation safe, report it, preserve useful information and involve the crew in identifying immediate and underlying causes. Agree actions, assign responsibility and check that the changes are effective. Encourage reporting rather than assuming that an incident without injury requires no learning.
43. How do you manage an inexperienced deck team?
Assess competence, assign tasks within each person’s ability, brief the work and supervise appropriately. Confirm understanding using clear communication and check-backs. Encourage questions and stop work when conditions change. Training and fatigue management are part of safe planning.
44. What would you do if a crew member refused an instruction because of a safety concern?
Listen and clarify the hazard, stop or pause the task if necessary, and reassess with the crew member and master as appropriate. Explain the revised controls and only resume when the work can be done safely. Do not discourage a legitimate safety challenge.
45. How do you manage simultaneous operations on deck?
Identify tasks that can interfere with each other, shared hazards, equipment, access routes and emergency arrangements. Coordinate with the bridge, engine room and terminal, establish a clear person in charge and use permits and communications as required. Reschedule or stop conflicting operations when controls are insufficient.
46. What should you do when a critical deck safety item is defective?
Inform the master, identify the operational risk, record and report the defect and follow the company and flag-State procedures. Put appropriate temporary controls or restrictions in place and arrange competent repair. Do not hide the defect or assume an improvised replacement is acceptable.
47. How do you prepare the deck for heavy weather?
Review the forecast and route with the master, secure cargo and loose equipment, check hatches, doors, lashings, vents and drainage, and suspend unsafe deck work. Consider stability, ballast, freeboard and the vessel’s response. Continue monitoring and adjust the plan when conditions change.
48. What would you do if you suspect that a bulk cargo has shifted?
Inform the master immediately and assess list, stability, structural condition, weather and personnel safety using the available data. Follow the ship’s emergency and cargo procedures; obtain specialist or company assistance. Do not open or enter a hazardous space, or shift ballast or cargo, without assessing the consequences.
49. What must the chief officer know about the ship’s security plan?
Know assigned duties, access control, reporting, drills and the appropriate actions for the current security level, while protecting sensitive information. Coordinate with the ship security officer and master as required. Security measures should be implemented in a way that also protects immediate ship and crew safety.
50. What would you do if the master became incapacitated?
Take the actions necessary to maintain immediate safety, assume command as provided by applicable law and the ship’s procedures, and inform the company and relevant authorities. Arrange medical assistance and assess navigation, staffing and the voyage. Maintain clear command, records and communications until relieved or further arrangements are made.
D. Master: command, navigation and bridge management
51. What is the master’s overriding authority?
Under the ISM system, the company should establish in the safety management system that the master has overriding authority and responsibility to make decisions concerning safety and pollution prevention and to request the company’s assistance as necessary. SOLAS also addresses the master’s professional judgement in specified navigation and security matters. The master remains accountable for applying the relevant law and managing the consequences.
52. What would you do if a charterer demanded departure in unsafe weather?
Assess the forecast, vessel condition, cargo securing, stability, crew, port restrictions and available options. Explain and document the reasons if departure is unsafe, communicate with the company and relevant parties, and plan a safe alternative. Do not allow commercial pressure to replace a proper safety assessment.
53. How do you determine the composition of a navigational watch?
Consider the minimum safe manning document, STCW and flag requirements, traffic, visibility, weather, proximity to danger, equipment condition, pilotage, workload and fatigue. Provide additional lookout or officers when needed and establish clear call criteria. A minimum manning number is not a guarantee that a particular bridge watch is adequate for every situation.
54. What should be included in the master’s standing orders?
Set clear expectations for watchkeeping, position checks, equipment, communications, calling the master, traffic, restricted visibility, emergencies and any ship-specific limitations. Ensure that officers read and understand the orders and that they are updated for the vessel and voyage. Standing orders do not replace the COLREGs or the duty to act against immediate danger.
55. When does the master take over the navigational watch from the OOW?
The master’s presence alone does not automatically mean the OOW has been relieved. A clear transfer of responsibility is needed, with mutual understanding and communication to the bridge team. Until properly relieved, the OOW must continue to perform the watch and act against danger.
56. How do you supervise a bridge team in restricted visibility?
Ensure safe speed, appropriate lookout, adequate personnel and suitable use of radar, sound signals and other information. On a power-driven vessel, have engines ready for immediate manoeuvre when required by Rule 19. Clarify roles and call points, assess traffic and sea room, apply the rules appropriate to whether vessels are in sight and monitor the effect of all actions.
57. Does a radar-only target in fog have the same stand-on or give-way status as a vessel in sight?
Do not automatically apply the in-sight crossing or head-on framework to a radar-only target. Rule 19 addresses vessels not in sight of one another in or near restricted visibility, including radar detection and avoiding action. Assess the entire situation and use the applicable rules and good seamanship.
58. What does the master do if the pilot’s advice appears unsafe?
Clarify the pilot’s intention and the vessel’s position and inform the bridge team. Assess the risk, use the master–pilot information exchange and challenge the instruction promptly. The master retains responsibility for the vessel’s safety and must take necessary action if immediate danger exists.
59. What factors matter when selecting a route around severe weather?
Use current forecasts and warnings, vessel condition, stability, cargo, draught, available sea room, port options and the uncertainty of the weather system. Consider the vessel’s manoeuvrability and the consequences of each route. Brief the team, set review points and update the decision as new information arrives. A generic cyclone-avoidance diagram does not replace the actual forecast and circumstances.
60. What would you do if GNSS data appeared inconsistent or unreliable?
Treat the discrepancy as a navigational risk, increase bridge support, cross-check position with radar, visual observations, depth and other independent means where available, and assess the route and available sea room. Check sensor settings and alert the company or authorities as required. Do not assume that an unexplained position jump has one specific cause.
61. How do you evaluate an ECDIS passage plan?
Check official chart coverage and updates, chart scale and data quality, route geometry, no-go areas, safety depth and contour settings, cross-track limits, look-ahead and alarms, sensor inputs, UKC, reporting, bridge staffing and contingencies. Compare the plan with other relevant information and understand equipment limitations. The approved back-up arrangement must be available.
62. What should happen if a passage plan must be changed at sea?
Assess the reason, hazards and available alternatives; use current charts, weather, traffic and vessel information. Modify and verify the route and contingency measures, brief the bridge team and communicate with the company or authorities when appropriate. Document the change. Immediate action to avoid danger takes priority over completing paperwork.
63. What is bridge resource management at command level?
It is the master’s organisation of people, information, equipment and procedures so that the team maintains situational awareness and makes effective decisions. Set clear roles, encourage challenge, use closed-loop communications, monitor workload and fatigue, and intervene when needed. The master must also avoid creating a bridge culture in which officers are afraid to report uncertainty.
64. What information is essential in a master–pilot exchange?
Discuss the route, berth, draught and clearance, vessel manoeuvring characteristics, propulsion and steering status, tugs, traffic, communications, local requirements and contingency plans. Confirm roles and expected orders. Continue the exchange and reassess if the plan or conditions change.
65. How do you decide whether to enter a port with a defective navigational aid?
Identify the defect and applicable legal and company requirements, assess redundancy, traffic, visibility, available assistance and the nature of the route. Inform the company, port, pilot and flag or other authority when required, and obtain any necessary authorisation. Delay or impose controls if the vessel cannot proceed safely; do not treat a risk assessment as a substitute for a required approval.
E. Master: emergencies and command decisions
66. What are your priorities after loss of propulsion near a lee shore?
Assess the vessel’s position, drift, depth, weather, traffic and time available; alert the engine room and bridge team. Use the ship’s emergency procedures and consider steering, anchoring, tugs and other assistance only in light of the actual conditions. Inform the company and coastal or rescue authorities as appropriate, and prepare the crew for possible escalation.
67. What would you do after a grounding?
Protect life, alert the crew and engine room, establish the ship’s position and movement, and assess damage, flooding, stability, stress and pollution risk. Obtain soundings and inspect spaces only when safe. Inform the company and authorities as required. Avoid an unplanned refloating attempt and seek specialist support for a controlled plan.
68. Why can an immediate refloating attempt be dangerous?
The seabed may be supporting part of the vessel, and movement can worsen hull damage, flooding, stability or pollution. Forces from engines or tugs can also increase structural stress. Assess tides, damage, buoyancy, strength and available assistance before a planned attempt unless immediate life-threatening conditions require another decision.
69. How do you manage flooding?
Raise the alarm, locate and assess the source, account for personnel and establish watertight integrity where safe. Coordinate the chief engineer and damage-control teams; monitor tanks, compartments, stability, trim and hull stress. Consider pumping and isolation only with regard to electrical, stability, environmental and personnel hazards. Inform the company and authorities as required.
70. What are the command priorities during an engine-room fire?
Raise the alarm, account for people and determine the fire location and ship’s immediate navigational condition. Organise firefighting, isolation, ventilation control and medical support under the emergency plan. Assess propulsion, steering and traffic risks; call external assistance as required. Decide on fixed firefighting or evacuation using the ship’s procedures and the actual situation.
71. What must be confirmed before releasing fixed CO₂ into a machinery space?
Follow the ship’s specific procedure: evacuate and account for personnel, control the required openings and ventilation, and ensure that authorised personnel operate the system with the alarms and delays respected. Coordinate navigation and communications. The space remains dangerous after release; re-entry requires a controlled plan and appropriate equipment.
72. When would you consider abandoning ship?
When remaining on board presents a greater threat to life than the risks of abandoning, considering fire, flooding, stability, weather, survival craft, rescue availability and other circumstances. Prepare early, account for people and communicate distress and position as appropriate. The decision is situation-specific and must follow training and the ship’s emergency plan.
73. What are your responsibilities after a collision?
Protect life, assess both immediate navigation risk and damage to your vessel, establish communications and organise damage control, medical assistance and pollution prevention. Provide assistance to the other vessel as required and safe, and notify appropriate authorities and the company. Preserve the voyage data recorder and relevant records according to the applicable procedures and law.
74. How would you respond to a distress alert from another vessel?
Assess the position, urgency, your vessel’s capability and the direction of the responsible rescue coordination centre. SOLAS includes an obligation for a master in a position to provide assistance to proceed with all speed to persons in distress, subject to the regulation’s conditions and exceptions. Communicate promptly, prepare the crew and equipment and record or report the decision as required.
75. What would you do if assistance would put your own ship or crew in serious danger?
Assess the actual ability to assist and the relevant SOLAS and other legal obligations, communicate promptly with the rescue coordination centre and consider alternative support. Where an applicable exception is relied upon, follow the requirements for reasons and records. Avoid making a blanket assumption that danger always removes every duty.
76. How would you manage rescue of a large number of people?
Coordinate with the rescue coordination centre, assess the ship’s manoeuvring and recovery capability, assign deck, medical and communications teams and provide life-saving equipment. Consider weather, crowd management, vulnerable people, water, food and medical needs. Plan safe disembarkation in cooperation with the relevant authorities and follow the ship’s procedures.
77. What should you do after a crew member is seriously injured?
Make the scene safe, provide first aid with trained personnel and obtain telemedical advice or external assistance when appropriate. Consider evacuation, vessel position, weather and the patient’s condition. Inform the company and authorities as required, protect medical privacy and preserve evidence of the accident.
78. What is a place of refuge?
It is a location where a ship in need of assistance may take action to stabilise its condition and reduce hazards to navigation or the environment. A place is not automatically available: the master or salvor should communicate with the appropriate maritime assistance service or authorities, present the situation and follow the applicable process. See the IMO’s places-of-refuge guidelines.
79. How would you manage a serious pollution incident?
Protect people, stop or reduce the source if safe, activate the ship’s emergency plan and organise containment as appropriate. Inform the company and coastal or port authorities in accordance with applicable reporting requirements. Record the facts accurately, preserve evidence and cooperate with response efforts. Never conceal or falsify information.
80. What is the difference between a mayday and a pan-pan message?
Mayday is the distress signal used when a vessel or person is threatened by grave and imminent danger and requires immediate assistance. Pan-pan indicates an urgent situation concerning safety that does not meet the distress threshold. Use the ship’s GMDSS procedures and appropriate services; seek assistance early when justified.
F. Master: cargo, regulation and personnel management
81. What should a master review before approving the cargo plan?
Check cargo declarations, stowage and securing, stability, draught, trim, strength and load-line limits, intermediate stages, ballast capability, dangerous goods, weather, ports and contingencies. Confirm that the chief officer and terminal understand the sequence. Approval requires active review; it is not merely signing a document.
82. What would you do if the chief officer and terminal disagreed about a safe loading rate?
Pause the affected operation if needed and obtain the facts: equipment capacity, ballast rate, structural and stability limits, cargo properties and communications. Support the chief officer’s safety concern, review the plan with the terminal and agree a revised sequence that the ship can safely execute. Do not resume simply because the terminal is under time pressure.
83. What is the purpose of the International Load Line Convention?
It establishes a framework for assigning freeboard and load lines and related conditions of assignment, helping protect reserve buoyancy and ship safety. The vessel must use its certificate, approved information, applicable zones and seasonal limits. Compliance with the load line does not by itself prove that every stability or strength criterion is met.
84. What are the master’s responsibilities under SOLAS?
They depend on the ship and the applicable regulations and include ensuring that the vessel is operated in accordance with relevant safety requirements. The master must understand, among other things, navigation safety, emergency arrangements, life-saving appliances, fire safety and distress assistance as applicable. The company, crew and authorities also have specific responsibilities.
85. What are the principal MARPOL annexes?
The six technical annexes address oil, noxious liquid substances in bulk, harmful substances in packaged form, sewage, garbage and air pollution. Application and detailed discharge or operational rules depend on the vessel, substance, location and current requirements. Ensure that relevant plans, equipment and records are maintained honestly.
86. What is the role of the ISM safety management system?
It establishes company and shipboard responsibilities, procedures, emergency preparedness, reporting, maintenance and internal review arrangements for safe operation and pollution prevention. The master must ensure that the system works in practice, motivate the crew and report deficiencies to the company. A file of procedures that is not followed does not control the risk.
87. What is port State control?
It is inspection by an authorised port State to verify compliance with applicable international and national requirements. The master should cooperate, provide accurate records, make competent crew available and address deficiencies. If a detention or disagreement occurs, follow the relevant reporting and review or appeal procedures and seek appropriate advice.
88. What should you do if an essential certificate or equipment item is found invalid before departure?
Identify the legal and safety implications, inform the company and the relevant flag, port or other authority as required, and arrange correction or an authorised alternative. Do not depart on the assumption that a commercial instruction or internal risk assessment automatically replaces a statutory certificate or approval.
89. Why must logbooks and official records be accurate?
They support safe handover, regulatory compliance, incident reconstruction and accountability. Entries should be timely, factual and made in accordance with the applicable instructions. Preserve the original record and make corrections transparently; never invent data or destroy evidence to protect the company or an individual.
90. How should evidence be preserved after a casualty?
Follow the ship’s procedures and applicable reporting and preservation obligations. Protect relevant voyage data recorder information, electronic logs, charts, communications, documents and equipment from loss or alteration, while continuing the emergency response. Record who handled evidence and obtain legal or investigative guidance where appropriate.
91. How do you manage crew fatigue?
Plan manning and work so that applicable rest requirements and safe watchkeeping can be met. Monitor actual hours and signs of fatigue, adjust tasks or staffing and encourage reporting. Emergencies and legally permitted exceptions must be handled under the applicable rules; false rest records are unacceptable.
92. What is the Maritime Labour Convention’s relevance to a master?
The MLC addresses a range of seafarers’ working and living conditions, subject to its scope and the relevant flag-State implementation. The master should understand assigned responsibilities concerning crew welfare, documentation, complaints, health and working arrangements. Specific legal advice should be obtained for a disputed case.
93. How should the master respond to harassment or bullying on board?
Protect the people involved, take reports seriously, use the company’s complaint and safeguarding procedures and avoid retaliation. Maintain confidentiality as far as appropriate, arrange support and inform the company or authorities when required. Investigate fairly and document actions.
94. What is the purpose of the ISPS Code?
It provides a framework for ship and port facility security under applicable SOLAS provisions. The master, ship security officer and company have distinct responsibilities. Follow the ship security plan, protect sensitive information and apply the relevant security level while preserving the safety of the ship and people on board.
95. What is the master’s security discretion?
SOLAS regulation XI-2/8 recognises the master’s professional judgement in decisions necessary for ship safety and security, including where a conflict arises between safety and security requirements. Apply the ship’s procedures, communicate with the company and authorities as appropriate and document the reasons.
96. How do you manage a cyber incident affecting the bridge?
Treat a suspicious failure as an operational safety issue, not merely an IT problem. Use approved backup navigation and communications, assess the reliability of sensor data and restrict affected connections in accordance with the company’s cyber procedures. Inform the company and relevant authorities where required, preserve evidence and restore systems under controlled conditions.
97. What should the master know about tanker, gas and alternative-fuel operations?
Understand the vessel’s specific hazards, emergency systems, cargo or fuel procedures and the crew’s required training and endorsements. Delegation to specialists does not remove the need for oversight. Avoid applying a generic procedure from a conventional fuel or cargo system to a different technology without the relevant approved instructions.
98. How should a master handle a stowaway?
Protect life and security, notify the company and relevant authorities, follow the ship’s and flag-State procedures, and treat the person humanely. Assess medical and security needs, document facts and cooperate with authorities concerning lawful disembarkation. Do not assume that a simple commercial instruction resolves all legal obligations.
99. How do you decide whether the ship is ready to sail?
Review the vessel’s condition, certificates, manning, crew fitness, cargo securing, stability, draught and strength, weather, navigation plan, machinery, steering, communication, emergency equipment and outstanding defects. Obtain required clearances and confirm readiness with the responsible officers. Delay departure if safety or mandatory requirements are not met.
100. What is the most important feature of a good master’s oral answer?
Show safe, lawful and reasoned command. Identify immediate risks, use reliable information and the team, explain the decision and alternatives, communicate clearly and monitor the result. Be honest about uncertainty and identify the ship-specific data or competent advice required before a detailed decision.
9. Scenario-based oral examinations
In a management-level oral exam, the examiner may add new facts after each answer. Practise stating who is responsible, what information is reliable, which limits apply and how the team will verify the result.
Scenario 1: Bulk loading exceeds a structural limit
Situation: During loading, the ship’s loading instrument shows a still-water bending moment above the permitted limit. The terminal wants to finish the hold before stopping.
Chief officer’s answer: Suspend the affected loading through the agreed ship–shore communication, inform the master and verify actual cargo quantities, tank levels, computer inputs and the approved limits. Prepare a recovery sequence with the master and terminal, checking each intermediate stage for strength, stability, draught and equipment constraints. Resume only after the plan is agreed and safe.
Master’s answer: Support the decision to stop, ensure that the vessel’s actual condition and immediate risks are understood, and coordinate with the terminal and company as appropriate. Require a verified recovery plan and competent assistance if the condition cannot be resolved using the approved information.
Likely follow-up: “Would you accept the terminal’s estimate without checking ship data?” No. The decision must be based on reliable, vessel-specific information.
Scenario 2: Unexpected list after ballast transfer
Situation: The ship develops an unexpected list while loading. Several ballast tanks are slack.
Chief officer’s answer: Stop or control cargo and ballast operations as necessary, inform the master and verify tank levels, actual cargo distribution and possible flooding. Assess free-surface effect and intact and applicable damage-stability information. Do not immediately transfer ballast to the opposite side without understanding the cause and consequences.
Master’s answer: Establish command, consider personnel and terminal safety, ensure the condition is independently checked and obtain technical assistance if necessary. Agree a controlled recovery plan and monitor its effect.
Scenario 3: Dangerous-goods discrepancy
Situation: A container’s placard does not match the dangerous-goods declaration, and the terminal is ready to load it.
Chief officer’s answer: Stop or reject the affected operation until the cargo is correctly identified. Inform the master and terminal, verify the declaration and current IMDG requirements, and review stowage, segregation and emergency arrangements.
Master’s answer: Ensure that no commercial pressure results in accepting unknown cargo. Support the chief officer, communicate with the company and terminal, and authorise loading only when the discrepancy is resolved and the plan complies with the applicable requirements.
Scenario 4: Restricted visibility and multiple radar targets
Situation: The ship approaches a congested strait in fog. Several targets are detected by radar; none are yet visually in sight.
Master’s answer: Ensure safe speed, engines ready for immediate manoeuvre as required, a proper lookout and adequate bridge staffing. Review the route, depth, traffic and radar plots; apply Rule 19 where its conditions are met and other relevant rules. Assign clear tasks and reassess continuously. Choose a manoeuvre only after considering all traffic and sea room; do not label a radar-only target as automatically stand-on or give-way under the in-sight crossing rule.
Chief officer’s contribution: Support navigation and traffic assessment, verify position and depth, communicate clearly and challenge any developing risk.
Scenario 5: GNSS disagreement during pilotage
Situation: GNSS shows the ship on the planned track, but radar ranges and a visual bearing indicate a position closer to shallow water. The pilot wants to continue.
Master’s answer: Treat the disagreement seriously. Increase bridge support, verify the position using available independent information and assess the immediate grounding risk. Discuss the discrepancy clearly with the pilot, amend speed or the plan as appropriate and use the contingency if the vessel cannot proceed safely. The pilot’s presence does not transfer the master’s responsibility.
Scenario 6: Loss of propulsion near a lee shore
Situation: Main propulsion fails in strong onshore wind and the vessel is drifting towards shallow water.
Master’s answer: Establish position, drift, depth and time to danger; alert the engine room, bridge team and company. Assess steering, anchor and tug options in the actual conditions; contact coastal or rescue authorities as necessary and prepare for escalation. Do not assume anchoring is safe without considering depth, speed, seabed, sea room and equipment limits.
Chief officer’s contribution: Prepare the deck team and anchoring equipment as directed while protecting personnel from heavy-weather and machinery hazards.
Scenario 7: Machinery-space fire
Situation: A fire grows in the engine room and propulsion may be lost in a traffic lane.
Master’s answer: Raise the alarm, account for personnel, organise firefighting and assess the vessel’s navigation and traffic situation. Coordinate engine-room isolation and ventilation in accordance with the emergency plan. Warn traffic and contact assistance as appropriate. Before fixed CO₂ release, ensure evacuation, accounting and system-specific closure and operation by authorised personnel.
Chief officer’s contribution: Lead assigned deck or fire teams, confirm muster and help control access and communications.
Scenario 8: Enclosed-space casualty
Situation: A crew member collapses in a cargo tank and another person proposes entering immediately.
Chief officer’s answer: Stop the unplanned entry, raise the alarm and activate the trained enclosed-space rescue plan. Arrange the team, breathing apparatus, retrieval equipment, communications and medical support.
Master’s answer: Coordinate the emergency, seek telemedical or external assistance when needed and ensure rescuers are not exposed to an uncontrolled atmosphere. A second casualty will not improve the outcome.
Scenario 9: Grounding and pressure to refloat
Situation: The ship grounds on a falling tide. The company suggests using full engine power immediately.
Master’s answer: Assess personnel safety, position, vessel movement, damage, flooding, soundings, stability, structural stress and pollution risk. Inform the company and authorities and obtain appropriate specialist assistance. Explain why an unassessed refloating attempt could worsen the situation; develop a controlled plan unless immediate life-threatening circumstances require another action.
Chief officer’s contribution: Organise safe soundings, compartment checks and damage reports as directed, and update cargo and ballast information.
Scenario 10: Oil spill during bunkering
Situation: Fuel overflows from a receiving tank during bunkering.
Chief officer’s answer: Stop transfer using the agreed emergency procedure, raise the alarm, inform the master and terminal and contain the spill if safe. Check tank levels, line-up and source; prevent further discharge and follow the ship’s pollution plan.
Master’s answer: Ensure personnel safety, required reporting and coordination with the terminal, company and authorities. Verify that the cause and corrective actions are addressed before authorising resumption.
Scenario 11: Distress alert and limited rescue capability
Situation: A vessel reports people in distress, but the weather is severe and your ship’s rescue boat cannot safely be launched.
Master’s answer: Contact the rescue coordination centre, assess your vessel’s position and actual ability to assist and consider alternative means of support. Apply SOLAS and other relevant obligations and exceptions; document reasons and communications where required. Prepare the crew and equipment without exposing them to an uncontrolled risk.
Follow-up: “Does inability to launch the rescue boat automatically mean you have no further responsibility?” No. Other assistance or coordination may be possible, depending on the circumstances.
Scenario 12: Departure with a defective safety system
Situation: A critical safety system fails shortly before departure and a commercial manager asks the vessel to sail on time.
Chief officer’s answer: Report the defect, identify the affected functions and check the safety management system, maintenance records and required operational restrictions.
Master’s answer: Assess the legal and operational consequences, inform the company and required authorities, arrange repair or a formally authorised alternative, and delay departure if necessary. A risk assessment does not replace a certificate, exemption or approval required by law.
10. Multiple-choice management-level practice test
Choose one best answer. These are original teaching questions, not official national examination questions.
Questions
1. STCW Regulation II/2 primarily concerns:
A. Masters and chief mates on seagoing ships of 500 GT or more, subject to its conditions
B. Only engine-room ratings
C. Only recreational craft
D. Only electro-technical officers
2. Why should intermediate loading stages be checked?
A. The final condition always proves every stage is safe
B. Strength or stability limits can be exceeded before loading is complete
C. Cargo and ballast never interact
D. Only the terminal needs the information
3. A loading computer result is reliable only when:
A. It is used with correct inputs and within its approved functions and limitations
B. The screen is switched on
C. The terminal gives verbal permission
D. Its figures are adjusted to match the schedule
4. Slack tanks may reduce effective initial stability because of:
A. Free-surface effect
B. Magnetic variation
C. Radar blind sectors
D. The ship’s radio call sign
5. A proposed container stack weighs 120 t and the approved limit is 100 t. What is the best response?
A. Load it because the ship still has deadweight available
B. Replan the stack because it exceeds the stated limit
C. Remove the limit from the computer
D. Ignore the verified gross mass
6. A pilot is on board. Who retains responsibility for the safety of the ship?
A. The master and bridge team retain their responsibilities
B. Only the pilot has responsibility
C. Nobody until the ship reaches the berth
D. The terminal alone
7. If GNSS position disagrees with radar and visual observations, the master should:
A. Assume GNSS is always correct
B. Treat the discrepancy seriously and verify position using suitable independent means
C. Ignore the other observations
D. Continue without informing the bridge team
8. Rule 19 applies to vessels:
A. Not in sight of one another when navigating in or near restricted visibility
B. Only at anchor
C. Only when both are sailing vessels in clear weather
D. Only when a pilot is on board
9. The presence of a radar-only target in fog means that the OOW should:
A. Automatically apply the in-sight stand-on/give-way crossing rule
B. Assess collision risk and comply with Rule 19 when its conditions apply
C. Ignore the target until visual contact
D. Rely only on a VHF agreement
10. The master’s overriding authority under the ISM system concerns:
A. Decisions on safety and pollution prevention and requesting company assistance as necessary
B. Avoiding all national laws
C. Transferring every responsibility to the charterer
D. Eliminating the need for a safety management system
11. After grounding, the best general response is to:
A. Apply maximum power without assessment
B. Assess safety, damage, stability, stress and pollution, and plan any refloating
C. Conceal the grounding
D. Open all watertight doors
12. Before releasing fixed CO₂ into a machinery space, the emergency team must:
A. Ensure personnel are evacuated and accounted for and follow the ship’s system procedure
B. Send an unprotected person inside
C. Open all ventilation openings
D. Ignore the release alarm
13. A person collapses in an enclosed space. What should be done first?
A. Enter alone without equipment
B. Raise the alarm and activate the trained rescue plan
C. Assume the atmosphere is safe
D. Continue cargo work without reporting
14. A cargo declaration conflicts with a dangerous-goods placard. The chief officer should:
A. Guess the correct cargo from the container’s colour
B. Suspend the affected operation and resolve the discrepancy
C. Load the container without checking
D. Destroy the declaration
15. The transportable moisture limit is relevant to:
A. Certain solid bulk cargoes under the applicable IMSBC requirements
B. Compass deviation only
C. The frequency of a radar display
D. Passenger cabin temperature only
16. If the master is incapacitated, the chief officer should:
A. Allow the vessel to continue without command
B. Assume command as provided by applicable law and procedures and arrange assistance
C. Transfer all decisions to the terminal
D. Abandon the bridge without informing anyone
17. A ship has 25,000 t deadweight available and 2,000 t of planned non-cargo items. Under the stated simplified assumptions, cargo is:
A. 20,000 t
B. 22,000 t
C. 23,000 t
D. 27,000 t
18. A weight moved upwards generally causes the ship’s centre of gravity to:
A. Rise
B. Fall
C. Remain unchanged in every case
D. Become the centre of buoyancy
19. Which action helps manage crew fatigue?
A. Accurate rest records and suitable workload and watch planning
B. Altering records to hide hours worked
C. Ignoring reports of tiredness
D. Assuming minimum manning is adequate for every operation
20. What is a place of refuge?
A. A location where a ship in need of assistance may stabilise its condition, subject to the relevant authority’s process
B. Any port that must automatically accept every ship
C. A substitute for a distress message
D. A location chosen without informing anyone
21. During cargo loading, the terminal asks to increase the rate beyond the ship’s ballast capability. The chief officer should:
A. Agree immediately to save time
B. Stop or reduce the operation and agree a safe sequence
C. Disable the tank alarms
D. Assume the master will correct the condition later
22. A compliant GM value by itself proves:
A. The vessel meets every strength and stability requirement
B. Only that the stated GM criterion may be met; other applicable criteria still require checking
C. That the cargo is correctly secured
D. That the load line may be exceeded
23. A power-driven vessel not in sight of others in restricted visibility must:
A. Proceed at a safe speed adapted to the circumstances and have engines ready for immediate manoeuvre under Rule 19
B. Always maintain maximum speed
C. Switch off the radar
D. Assume every target is a stand-on vessel
24. What should a master do when a legally required certificate or essential system is invalid before departure?
A. Seek correction and any required approval and delay departure if necessary
B. Sail because the schedule is important
C. Alter the certificate
D. Assume an internal risk assessment overrides every legal requirement
25. The best management-level oral answer normally includes:
A. Risk assessment, decision, communication, implementation and monitoring
B. A memorised rule number without context
C. A claim that every emergency has one identical solution
D. No mention of the crew
Answer key and explanations
| Question | Answer | Explanation |
|---|---|---|
| 1 | A | Regulation II/2 addresses relevant management-level deck certification. |
| 2 | B | An intermediate stage can be unsafe even if the planned final condition is acceptable. |
| 3 | A | Correct input, approved data and the instrument’s limitations matter. |
| 4 | A | Moving liquid can create a free-surface correction that reduces effective GM. |
| 5 | B | The proposed stack exceeds the stated approved limit by 20 t. |
| 6 | A | Pilotage does not remove the master’s or bridge team’s responsibilities. |
| 7 | B | A position discrepancy must be investigated using available independent information. |
| 8 | A | Rule 19 has specific visibility and not-in-sight conditions. |
| 9 | B | The radar-only situation must be assessed under the applicable rules. |
| 10 | A | The ISM system recognises the master’s authority for safety and pollution-prevention decisions. |
| 11 | B | An unassessed refloating attempt can worsen damage or pollution. |
| 12 | A | Personnel accounting and the ship-specific fixed-firefighting procedure are essential. |
| 13 | B | An uncontrolled rescue attempt can create additional casualties. |
| 14 | B | Unknown or inconsistent dangerous-goods information must be resolved before loading. |
| 15 | A | TML is relevant to certain solid bulk cargoes and applicable Code requirements. |
| 16 | B | Immediate safety, command continuity and medical assistance are priorities. |
| 17 | C | 25,000 − 2,000 = 23,000 t under the assumptions given. |
| 18 | A | A vertical upward movement of weight raises G, all else equal. |
| 19 | A | Fatigue management requires accurate records and realistic planning. |
| 20 | A | A place of refuge is considered through the relevant authority and assistance process. |
| 21 | B | The ship and terminal must agree a rate and sequence that the ship can manage safely. |
| 22 | B | A single GM value does not establish compliance with all other criteria. |
| 23 | A | Those are among the requirements of Rule 19 in the stated circumstances. |
| 24 | A | Mandatory requirements cannot simply be replaced by commercial instructions. |
| 25 | A | Examiners assess safe management and decision-making as well as technical knowledge. |
Use the explanations to identify what you need to revise; a high multiple-choice score does not replace an oral, practical or simulator demonstration.
11. An eight-week management-level study plan
This plan can be adapted to a chief officer or master examination. Start by obtaining the current syllabus and confirming which assessments apply to your certificate and route.
| Week | Main subjects | Suggested activity |
|---|---|---|
| 1 | STCW II/2, leadership and management responsibilities | Compare chief mate and master duties; review the official national syllabus and certificate limitations. |
| 2 | Advanced passage planning, weather and bridge management | Review a berth-to-berth plan, no-go areas, contingencies, bridge staffing and master–pilot exchange. |
| 3 | COLREGs, radar, ARPA, ECDIS and ship handling | Practise complex traffic and restricted-visibility cases on paper or a bridge simulator. Explain the rule’s conditions. |
| 4 | Stability, trim, load lines and hull strength | Solve KG, GM, free-surface, trim and cargo-stage problems using approved training data. |
| 5 | Cargo operations and ship–shore coordination | Develop loading plans for a bulk carrier, container ship or tanker; check intermediate stages and emergency stops. |
| 6 | Emergency command, SAR, fire and flooding | Conduct mock oral scenarios and assign command, communication, damage-control and medical roles. |
| 7 | SOLAS, MARPOL, STCW, ISM, ISPS and MLC | Make a table of each instrument’s purpose, shipboard application and the officer’s responsibilities. |
| 8 | Full revision and mock assessment | Complete a written paper and a mock oral; repeat calculations and scenarios that revealed weaknesses. |
A suggested daily routine
- 30 minutes: Study an official regulation, code or national syllabus topic.
- 30 minutes: Work a stability, cargo, chartwork or ship-handling problem.
- 20 minutes: Explain one management decision aloud, including alternatives and risks.
- 10 minutes: Review maritime English, abbreviations and communication phrases.
- 10 minutes: Record weak areas and questions for an instructor or experienced master.
Where a bridge or cargo simulator is available, practise with a team. Ask one person to change the scenario—for example, introduce a second traffic target, ballast-pump failure or new weather warning—and assess how the team updates the plan.
Suggested mock oral examination
Ask an examiner or colleague to select questions and request a reason for each decision:
- What is the difference between the master’s and chief officer’s responsibilities during loading?
- How will you verify that every stage of a cargo and ballast plan is safe?
- A loading computer shows negative or inadequate corrected GM. What information do you need before acting?
- How would you handle a terminal instruction that conflicts with the ship’s structural limits?
- How do you assess a pilot’s proposed departure manoeuvre?
- Explain your command response to loss of steering in restricted visibility.
- How do you organise a response to machinery-space fire?
- What must happen before fixed CO₂ is released?
- A person is unconscious in an enclosed space. How will you prevent a second casualty?
- When and how would you request a place of refuge?
- What do you do when a company instruction conflicts with safe navigation?
- How do you preserve records and report after a casualty?
Final preparation checklist
- ☐ I have confirmed my exact certificate, issuing authority, tonnage, voyage limits and eligibility.
- ☐ I have the current official syllabus and know which written, oral, simulator and practical assessments apply to my route.
- ☐ I can explain the difference between management-level responsibilities and operational-level tasks.
- ☐ I can assess a complete passage plan, bridge staffing and master–pilot exchange.
- ☐ I can apply COLREGs in their correct visibility and vessel-status context.
- ☐ I can calculate basic KG, corrected GM, trim and under-keel clearance and explain the limitations.
- ☐ I can check cargo, ballast, strength and stability at intermediate as well as final stages.
- ☐ I understand dangerous-goods documentation, bulk-cargo hazards and ship–shore coordination.
- ☐ I can command or support response to fire, flooding, grounding, collision and a medical emergency.
- ☐ I understand enclosed-space rescue and fixed-firefighting precautions.
- ☐ I can explain the purpose of SOLAS, MARPOL, STCW, ISM, ISPS and the MLC at the level required by my syllabus.
- ☐ I can identify when to contact the company, flag State, coastal or port authorities and rescue services.
- ☐ I can explain a decision, its assumptions, alternatives and how I would verify its result.
- ☐ For an Iranian CoC: I have obtained the current PMO requirements and confirmed the exact assessment format, language, eligibility and any limitations.
12. Glossary for management-level deck officers
| Term | Meaning |
|---|---|
| A-II/2 | Section of the STCW Code containing management-level competence standards for relevant masters and chief mates. |
| Ballast | Water or other material carried to control draught, trim or stability. |
| Bending moment | A measure of longitudinal bending effects in the hull due to the distribution of weight and buoyancy. |
| Chief mate / chief officer | The deck officer normally next in rank to the master. |
| CoC | Certificate of Competency. |
| COLREGs | International Regulations for Preventing Collisions at Sea. |
| Draught | Vertical distance from the waterline to the relevant point on the vessel’s keel. |
| DWT | Deadweight: the total weight a vessel carries in a stated condition, including cargo, fuel, stores, water and other items. |
| ECDIS | Electronic Chart Display and Information System. |
| Free-surface effect | A reduction in effective initial stability associated with liquid movement in partially filled tanks. |
| GM | Transverse metacentric height, used in assessment of initial stability. |
| GMDSS | Global Maritime Distress and Safety System. |
| IMDG Code | International Maritime Dangerous Goods Code for relevant dangerous goods in packaged form. |
| IMSBC Code | International Maritime Solid Bulk Cargoes Code. |
| ISM Code | International Safety Management Code. |
| ISPS Code | International Ship and Port Facility Security Code. |
| KG | Height of the ship’s centre of gravity above the keel in the stated reference system. |
| KM | Height of the transverse metacentre above the keel for a stated condition. |
| Master | The person in command of the ship; commonly called the captain. |
| MCTC | Moment to change trim by one centimetre. |
| MLC | Maritime Labour Convention. |
| PMO | Ports and Maritime Organization of the Islamic Republic of Iran. |
| PSC | Port State control. |
| Shear force | A longitudinal structural effect caused by the distribution of weight and buoyancy. |
| SOLAS | International Convention for the Safety of Life at Sea. |
| STCW | International Convention on Standards of Training, Certification and Watchkeeping for Seafarers. |
| TML | Transportable moisture limit for relevant solid bulk cargoes under the applicable Code. |
| Trim | Difference between draughts forward and aft, using the vessel’s applicable convention. |
| UKC | Under-keel clearance. |
| VGM | Verified gross mass of a packed container under the applicable SOLAS requirements. |
13. Official references and further reading
The sources below are official international, national-administration or legislative resources. Some older publications are useful background but should be checked for amendment or replacement before an exam. The source for Iran identifies its maritime authority; it does not establish an up-to-date exam format.
International regulations and guidance
- IMO: STCW Convention and Code.
- IMO: STCW Manila amendments, including management-level deck standards.
- IMO: International Regulations for Preventing Collisions at Sea.
- IMO: Guidelines for voyage planning, Resolution A.893(21).
- IMO: SOLAS Convention.
- IMO: MARPOL Convention.
- IMO: ISM Code.
- IMO: SOLAS XI-2 and the ISPS Code.
- IMO: International Convention on Load Lines.
- IMO: Ship design and stability.
- IMO: IMDG Code and packaged dangerous goods.
- IMO: IMSBC Code.
- IMO: BLU Code and ship–shore bulk loading.
- IMO: Revised recommendations for entering enclosed spaces, MSC.581(110).
- IMO: Guidelines on places of refuge.
National certification and examination resources
- Iran: IMO-circulated PMO communication identifying the Iranian maritime administration; ILO country profile and competent-authority information. Request the current chief mate/master examination syllabus and application instructions from PMO.
- Italy: Decree 72 of 7 May 2025; STCW examination programmes.
- United Kingdom: MCA Chief Mate/Master Unlimited digital assessment syllabus; MCA modernised qualification guidance; MCA deck oral syllabus.
- India: DGS examination and certification information; DGS Circular 07/2026 on oral-exam preparation.
- Philippines: MARINA approved STCW circulars, including the listed deck certification circular SC-2021-03.
- United States: USCG deck examination modules; USCG Q102 Master/Chief Mate sample examination; US international and inland navigation rules.
- Canada: Marine Personnel Regulations; Transport Canada TP 2293: Examination and Certification of Seafarers.
- Australia: AMSA Chief Mate Unlimited; AMSA Master Unlimited.
- New Zealand: Maritime NZ Chief Mate guidance; management-level training information.
- South Africa: SAMSA deck officer oral-assessment syllabus guideline.
- Singapore: MPA deck examination categories; historical Class 1 oral and simulator circular.
- Pakistan: Mercantile Marine Department examination categories.
For maritime instructors: Adapt the questions to the relevant national syllabus, vessel type and approved simulator or loading data. Encourage candidates to identify assumptions, compare options, make a reasoned management decision, communicate it and verify the outcome.
