
Good maintenance helps a ship use less energy to do the same work. A clean hull needs less power to move through the water. Well-maintained machinery wastes less fuel, electricity and heat. When a ship burns less of the same conventional fuel, it also produces less carbon dioxide, or CO₂.
Three systems help the crew achieve this. The International Safety Management Code, or ISM Code, sets maintenance requirements. The Planned Maintenance System, or PMS, organizes the work. The Ship Energy Efficiency Management Plan, or SEEMP, helps the company and crew plan, measure and improve energy performance. [1, 2, 8]
1 What ISM Code element 10 requires
The ISM Code is mandatory for ships within its scope under SOLAS chapter IX. Element 10 is called Maintenance of the ship and equipment. The following is a simple explanation of its four sections. [1]
| Section | Meaning in simple English |
| 10.1 | The company must have procedures to maintain the ship according to relevant rules, regulations and its own additional requirements. |
| 10.2 | Inspect at suitable intervals. Report non-conformities and possible causes, when known. Take corrective action and keep records. |
| 10.3 | Identify equipment whose sudden failure could create danger. Provide measures to improve reliability, including regular tests of standby equipment and systems not used continuously. |
| 10.4 | Include these inspections and reliability measures in the ship’s normal maintenance routine. |
The main purpose is safe operation and pollution prevention. Element 10 does not set a percentage fuel-saving target or require computer software. Its practical contribution to energy efficiency is to make inspection, repair and follow-up part of normal work.
Some jobs, such as testing an emergency generator, mainly protect safety. They remain essential even when they do not save fuel.
2 How a planned maintenance system works
A PMS helps the crew plan, carry out and record maintenance. It connects each item of equipment with the work it needs. A useful job record identifies the equipment, instructions, due date or running hours, responsible person, spare parts and work completed. The system also records defects and unfinished work. [2]
For example, a job for an air compressor can include checking its condition and recording defects. If the crew finds a leaking valve, the record should show the repair and the result of the test after repair. Clicking “completed” without doing and checking the work does not improve efficiency.
Different reasons to schedule a job
| Approach | What starts the maintenance |
| Calendar based | A date or time interval in the approved schedule. |
| Running hours based | The equipment reaches the specified operating hours. |
| Condition based | Inspection or measurements show deterioration. |
| Predictive | Analysis of trends estimates when deterioration may require action. |
A ship can use several approaches together. The correct choice depends on the equipment, manufacturer’s instructions, company procedures and applicable class or flag requirements. [2, 3]
What modern systems add
Many ships now use digital PMS software. It can show overdue jobs, equipment history, spare parts and information shared with the shore office. Some installations also connect maintenance decisions with engine measurements and condition monitoring. These functions vary between ships. [2, 3]
Engine data, oil analysis and inspections can help engineers identify wear or a loss of performance. Where supported by the manufacturer and accepted under the applicable requirements, this evidence may help adjust maintenance intervals. A computer prediction alone is not a reason to postpone required work. [3]
How the energy benefit happens
Maintenance can restore efficiency that has been lost through dirt, wear or leaks. It can also prevent this loss from becoming larger. It does not automatically make equipment more efficient than its original design. A separate modification may be needed for that.
A PMS is therefore useful when it leads to real work: someone notices a problem, arranges the repair, checks the result and records what happened. The company must provide the people, time and spare parts needed to complete that work.
3 How maintenance prevents energy losses
Hull and propeller
Slime, algae and barnacles can collect on the underwater hull. This is called biofouling. It increases resistance, also called drag. The engine then needs more power to maintain the same speed through the water. Hull inspection, suitable cleaning and coating maintenance help control this loss. [13]
A rough or fouled propeller can also waste energy. Inspection and suitable cleaning or polishing help maintain its performance. Hull and propeller work should be linked to the maintenance plan. In-water cleaning must follow local requirements and suitable methods because it can damage coatings and release organisms or waste. [8, 14]
Main engines and generator engines
An injector should deliver fuel in the correct spray pattern. Worn or dirty parts can disturb combustion. Worn cylinder parts or leaking valves can also reduce performance. When efficiency falls, more fuel is needed for the same engine output. Engineers investigate the cause, then repair or replace parts according to the manufacturer’s instructions.
Engine tests should use accurate instruments and comparable operating conditions. Measurements such as cylinder pressure and exhaust temperature help the engineer assess performance. After maintenance, another test helps show whether the problem has been corrected. Engine adjustments must remain within approved limits, including applicable nitrogen oxide emission requirements. [4, 9]
Turbochargers and the air supply
A turbocharger uses exhaust gas energy to help supply air to the engine. Deposits on its turbine or compressor can reduce performance. Correct cleaning and servicing help the engine maintain efficient operation. The crew should follow the maker’s cleaning procedure and operating limits. [5]
The charge air cooler also needs attention. Deposits can reduce heat transfer or restrict air flow. Cleaning it when required helps restore the intended air conditions. The engineer should investigate abnormal temperatures or pressure differences instead of assuming that every change has the same cause.
Boilers and steam systems
Soot or scale on heat-transfer surfaces makes it harder to transfer heat. Steam leaks and damaged insulation waste heat after it has been produced. Faulty steam traps can also waste energy. Maintenance should address these losses and keep boiler combustion correctly adjusted. [6]
An economizer recovers heat from exhaust gas. Keeping it in suitable condition helps maintain heat recovery and may reduce the need to burn fuel in an auxiliary boiler. This matters especially on ships with large heating demands, such as tankers. [6, 8]
4 Small losses and reliable measurements
Compressed air and electrical equipment
A compressed-air leak makes the compressor run more often to replace lost air. Extra running time uses electricity. If an onboard diesel generator supplies that electricity, it burns extra fuel. Repairing leaks can therefore reduce fuel use even though the compressor itself does not burn fuel. [7]
Correct lubrication, alignment and belt condition reduce avoidable mechanical losses. Pumps, fans, coolers and their controls also need maintenance so that they can provide the required service efficiently. Reducing electrical demand must preserve cooling, ventilation, cargo protection and other essential services. [7, 15]
Keeping generator engines reliable also helps the chief engineer choose a suitable operating arrangement. The number of generators in use must still satisfy the ship’s power demand, reserve requirements and operating procedures. Energy saving must never remove essential standby capability.
Check the result of the work
Record completion of the job in the PMS, then use performance data to check its effect on energy use. Use a suitable baseline, which means a reference condition for comparison. The following are practical examples of measurements to discuss with a supervising officer.
| Work being assessed | Useful comparison |
| Hull or propeller cleaning | Power or fuel use at a comparable speed through the water, draught and sea condition. |
| Engine maintenance | Fuel used per unit of useful energy at comparable engine load and fuel quality. |
| Compressed-air repair | Compressor running hours or electricity use for a comparable air demand. |
| Steam-system repair | Boiler fuel use for a comparable steam or heating demand. |
For an engine, specific fuel consumption means fuel used per unit of energy produced. It is often expressed in grams per kilowatt-hour, or g/kWh. Check whether the measured output is shaft energy or electrical energy. Comparisons must use the same basis.
A lower daily fuel figure is not enough to prove a maintenance saving. The ship may have sailed more slowly, carried less cargo or experienced better weather. Compare several suitable periods and account for changes in speed, draught, wind, waves, current, machinery load and fuel. Keep meters and sensors correctly checked or calibrated. [4]
Savings vary with the original condition and the work performed. There is no single saving percentage for every PMS or ship. Avoid adding separate saving estimates without checking for overlap.
5 The direct link with SEEMP
The IMO SEEMP guidelines make the link clear. Part I may form part of the ship’s Safety Management System, or SMS. They also identify maintenance under the company’s planned schedule and engine condition monitoring as ways to maintain efficiency. See paragraphs 3.4 and 5.3.15 of the consolidated guidelines issued in June 2026. [8]
This gives the systems complementary roles. ISM element 10 provides the maintenance requirements. The PMS turns them into scheduled jobs and records. SEEMP connects suitable maintenance measures with energy objectives and performance review.
The three parts of SEEMP
The table gives the general international framework. It applies within the scope of MARPOL Annex VI chapter 4 and its exemptions. GT means gross tonnage, a measure of a ship’s enclosed volume, not its weight. [9]
| Part | Purpose and usual application | Maintenance connection |
| Part I | Energy-efficiency management. Ships of 400 GT and above within scope. | Select measures such as machinery maintenance and hull cleaning; review their results. |
| Part II | Fuel-consumption data collection for the IMO Data Collection System, or DCS. Ships of 5,000 GT and above within scope. | Maintain measuring equipment and follow the stated data-collection method. |
| Part III | Operational carbon-intensity planning. Ships of 5,000 GT and above in the ship categories covered by CII. | Include relevant maintenance measures in the plan to achieve the required annual CII. |
The Carbon Intensity Indicator, or CII, relates annual CO₂ emissions to a measure based on ship capacity and distance travelled, with applicable adjustments. It is not a direct measure of engine condition. Maintenance can support a better result, but the annual rating also depends on how the ship operates. [9, 10]
Ratings run from A, the best, to E, the worst. A ship rated D for three consecutive years, or E for one year, must develop a corrective-action plan within its SEEMP. Maintenance may be one action if poor equipment or hull condition contributes to the problem. [10]
An example of using the systems together
Suppose compressor electricity use rises. The crew reports a leak through the ship’s procedures and creates a PMS repair job. The engineer arranges the work, completes the required safety checks and tests the repair. The crew then compares compressor use under similar conditions. The SEEMP review uses the result to decide whether the measure worked and whether further action is needed.
This applies the SEEMP cycle: planning, implementation, monitoring, and self-evaluation and improvement. The maintenance record and energy record should refer to the same work. [8]
6 A worked example of fuel and CO2 savings
Consider an imaginary ship using marine gas oil. After maintenance, it performs the same work with lower fuel consumption. Assume that suitable comparisons have accounted for operating conditions and that the saving continues for 200 similar operating days.
| Quantity | Value |
| Fuel use before maintenance | 20.0 tonnes per day |
| Fuel use after maintenance | 19.0 tonnes per day |
| Daily fuel saving | 1.0 tonne per day |
| Percentage saving | 5% of the original daily use |
| Fuel saved over 200 similar days | 200 tonnes in total |
The example uses the IMO carbon conversion factor for diesel/gas oil: 3.206 tonnes of CO₂ per tonne of fuel. Different fuels have different factors. [11]
These are illustrative numbers, not a measured result or a guaranteed maintenance saving. They show how an established fuel saving can be converted into an estimate of avoided CO₂ from fuel use.
Why the percentage relationship matters
With the same fuel and carbon conversion factor, a 5% reduction in fuel burned gives a 5% reduction in calculated combustion CO₂ over the same work and period. A more efficient ship can still use more fuel in a year if it sails much farther or operates for more days. Efficiency and total annual consumption are different measures.
CO2 is one greenhouse gas
Greenhouse gases, or GHGs, trap heat in the atmosphere. CO₂ is a major GHG from conventional marine fuel use. The wider climate effect can also involve methane, CH₄, and nitrous oxide, N₂O. These gases do not necessarily change in the same proportion as fuel consumption. [12]
For example, an LNG engine may release some unburned methane, known as methane slip. Its level depends on the engine and operating conditions. Therefore, a fuel or CO₂ saving alone does not describe every GHG effect.
A complete fuel assessment also considers emissions from producing and supplying the fuel. This is the well-to-wake approach. Emissions from using fuel on the ship are the tank-to-wake part. The calculation above covers combustion CO₂ only; it is not a complete life-cycle GHG calculation. [12]
7 Learning and working on board
As a cadet or junior seafarer, you can help by observing carefully and keeping accurate records. Work under the responsible officer’s supervision and follow the ship’s procedures.
- Report leaks, unusual noise, abnormal temperatures, repeated alarms and unexpected running hours.
- Read the relevant PMS job and maker’s instructions before assisting with maintenance.
- Record the actual findings, work and measurements. Leave unfinished work clearly identified.
- Observe the required isolation, permits and protective measures. Do not alter engine settings or disable equipment to seek a fuel saving.
- Ask how the completed job will be checked and how its result supports the ship’s SEEMP.
Useful words
| Word or expression | Simple meaning |
| Energy efficiency | Using less energy to provide the same useful service. |
| Non-conformity | A situation where a specified requirement is not met. |
| Corrective action | Action to correct a problem and address its cause. |
| Condition monitoring | Checking measurements or observations to assess equipment condition. |
| Fouling | Unwanted deposits or growth on a surface. |
| Baseline | The reference used to judge a change in performance. |
| Calibration | Checking an instrument against a known reference. |
| kWh | Kilowatt-hour, a unit of energy. |
Questions for study or class discussion
- Why can a compressed-air leak increase a ship’s fuel consumption?
- What is the difference between a PMS repair record and evidence of an energy saving?
- Why should two daily fuel figures be compared carefully?
- Which SEEMP part can contain machinery maintenance as an energy-efficiency measure?
- If a ship saves 10 tonnes of marine gas oil, how much combustion CO₂ is avoided using the factor in this guide?
Answer check: 1. It causes extra compressor electricity use, which can require extra generator fuel. 2. The record describes the work; comparable measurements show the energy result. 3. Operating conditions or useful work may have changed. 4. Part I; relevant actions may also support Part III. 5. 32.06 tonnes of CO₂.
Sources and further reading
Checked on 28 October 2026. The numbered references support the explanations in this guide. The shipboard examples and numerical exercise are teaching examples. Use the ship’s current approved documents and manufacturer’s instructions for actual work.
[1] IMO. International Safety Management Code. Section 10. Code text hosted by the German flag administration.
[2] DNV. Planned maintenance system for technical ship management. Explanation of PMS functions and digital maintenance records.
[3] Wärtsilä. Data driven Maintenance Planning service. Use of engine data, inspections and manufacturer support for maintenance decisions.
[4] IMO GreenVoyage2050. Engine performance optimization manual. Performance testing, comparable conditions and verification.
[5] Wärtsilä. Ship turbocharger services. Turbocharger condition and fuel efficiency.
[6] IMO GreenVoyage2050. Steam plant operation improvement. Boiler performance, steam leaks, traps and insulation.
[7] IMO. Energy Efficient Ship Operation training course Module 4. Ship-board Energy Management, especially slides on maintenance and compressed air.
[8] IMO. MEPC.1/Circ.925 consolidated SEEMP guidelines. 5 June 2026. MEPC.395(82), as amended by MEPC.401(83) and MEPC.413(84). See 3.4, 3.6, 5.3.10–5.3.15 and 5.4.
[9] IMO. MARPOL Annex VI revised text in MEPC.328(76). Regulations 19 and 26–28. Read with subsequent amendments and the current SEEMP guidance in reference 8.
[10] IMO. EEXI and CII ship carbon intensity and rating system. Explanation of annual CII ratings and corrective-action plans.
[11] IMO. MEPC 79/6/1 fuel oil consumption data report. Annex, table 4. Diesel/gas oil carbon conversion factor of 3.206.
[12] IMO. Framework on life cycle GHG intensity of marine fuels. CO₂, methane, nitrous oxide and life-cycle assessment boundaries.
[13] IMO GreenVoyage2050. Hull cleaning. Fouling, resistance and energy use.
[14] IMO. Biofouling. Biofouling management and environmental considerations for in-water cleaning.
[15] IMO GreenVoyage2050. Auxiliary systems optimization. Auxiliary energy demand and operation.

Thx